GET https://kbin.spritesserver.nl/m/sewingrepairing@sh.itjust.works/t/7070/bought-used-machine-needle-broke-diagnosis-needed/favourites

Response
200 OK
IP
3.145.75.69
Profiled on
Token
322418

Security

Token

There is no security token.

Firewall

main Name
Security enabled
Stateless

Configuration

Key Value
provider security.user.provider.concrete.app_user_provider
context main
entry_point App\Security\KbinAuthenticator
user_checker App\Security\UserChecker
access_denied_handler (none)
access_denied_url (none)
authenticators 
[
  "two_factor"
  "remember_me"
  "App\Security\KbinAuthenticator"
  "App\Security\FacebookAuthenticator"
  "App\Security\GoogleAuthenticator"
  "App\Security\GithubAuthenticator"
  "App\Security\KeycloakAuthenticator"
]

Listeners

Listener Duration Response 
Symfony\Component\Security\Http\Firewall\ChannelListener {#723
  -map: Symfony\Component\Security\Http\AccessMap {#722 …}
  -logger: Monolog\Logger {#783 …}
  -httpPort: 80
  -httpsPort: 443
}
 0.00 ms (none) 
Symfony\Component\Security\Http\Firewall\ContextListener {#706
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\TokenStorage {#1017 …}
  -sessionKey: "_security_main"
  -logger: Monolog\Logger {#783 …}
  -userProviders: Symfony\Component\DependencyInjection\Argument\RewindableGenerator {#705 …}
  -dispatcher: Symfony\Component\EventDispatcher\Debug\TraceableEventDispatcher {#747 …}
  -registered: false
  -trustResolver: Scheb\TwoFactorBundle\Security\Authentication\AuthenticationTrustResolver {#780 …}
  -sessionTrackerEnabler: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage::enableUsageTracking(): void {#703 …}
}
 0.25 ms (none) 
Symfony\Component\Security\Http\Firewall\AuthenticatorManagerListener {#584
  -authenticatorManager: Symfony\Component\Security\Http\Authentication\AuthenticatorManager {#595 …}
}
 0.00 ms (none) 
Scheb\TwoFactorBundle\Security\Http\Firewall\TwoFactorAccessListener {#582
  -twoFactorFirewallConfig: Scheb\TwoFactorBundle\Security\TwoFactor\TwoFactorFirewallConfig {#842 …}
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …}
  -twoFactorAccessDecider: Scheb\TwoFactorBundle\Security\Authorization\TwoFactorAccessDecider {#581 …}
}
 0.04 ms (none) 
Symfony\Component\Security\Http\Firewall\AccessListener {#579
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …}
  -accessDecisionManager: Symfony\Component\Security\Core\Authorization\TraceableAccessDecisionManager {#937 …}
  -map: Symfony\Component\Security\Http\AccessMap {#722 …}
}
 0.00 ms (none) 
Symfony\Component\Security\Http\Firewall\LogoutListener {#786
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …}
  -options: [
    "csrf_parameter" => "_csrf_token"
    "csrf_token_id" => "logout"
    "logout_path" => "app_logout"
  ]
  -httpUtils: Symfony\Component\Security\Http\HttpUtils {#841 …}
  -csrfTokenManager: Symfony\Component\Security\Csrf\CsrfTokenManager {#1015 …}
  -eventDispatcher: Symfony\Component\EventDispatcher\Debug\TraceableEventDispatcher {#747 …}
}
 0.00 ms (none)

Authenticators

No authenticators have been recorded. Check previous profiles on your authentication endpoint.

Access Decision

affirmative Strategy
# Voter class
1 
"Symfony\Component\Security\Core\Authorization\Voter\AuthenticatedVoter"
2 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
3 
"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
4 
"Symfony\Component\Security\Core\Authorization\Voter\ExpressionVoter"
5 
"App\Security\Voter\EntryCommentVoter"
6 
"App\Security\Voter\EntryVoter"
7 
"App\Security\Voter\MagazineVoter"
8 
"App\Security\Voter\MessageThreadVoter"
9 
"App\Security\Voter\MessageVoter"
10 
"App\Security\Voter\NotificationVoter"
11 
"App\Security\Voter\OAuth2UserConsentVoter"
12 
"App\Security\Voter\PostCommentVoter"
13 
"App\Security\Voter\PostVoter"
14 
"App\Security\Voter\UserVoter"

Access decision log

# Result Attributes Object
1 DENIED ROLE_USER 
null
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
2 DENIED moderate 
App\Entity\Entry {#1832
  +user: Proxies\__CG__\App\Entity\User {#1881 …}
  +magazine: App\Entity\Magazine {#312
    +icon: Proxies\__CG__\App\Entity\Image {#292 …}
    +name: "sewingrepairing@sh.itjust.works"
    +title: "sewingrepairing"
    +description: "A place to share ideas, knowledge and creations with textiles. The focus is on reducing waste, whether that be sewing from the scraps left from other projects, using the end of rolls and remnants, or repairing and remaking finished pieces."
    +rules: null
    +subscriptionsCount: 1
    +entryCount: 11
    +entryCommentCount: 23
    +postCount: 0
    +postCommentCount: 0
    +isAdult: false
    +customCss: null
    +lastActive: DateTime @1728098405 {#320
      date: 2024-10-05 05:20:05.0 +02:00
    }
    +markedForDeletionAt: null
    +tags: null
    +moderators: Doctrine\ORM\PersistentCollection {#283 …}
    +ownershipRequests: Doctrine\ORM\PersistentCollection {#279 …}
    +moderatorRequests: Doctrine\ORM\PersistentCollection {#268 …}
    +entries: Doctrine\ORM\PersistentCollection {#226 …}
    +posts: Doctrine\ORM\PersistentCollection {#184 …}
    +subscriptions: Doctrine\ORM\PersistentCollection {#246 …}
    +bans: Doctrine\ORM\PersistentCollection {#163 …}
    +reports: Doctrine\ORM\PersistentCollection {#149 …}
    +badges: Doctrine\ORM\PersistentCollection {#127 …}
    +logs: Doctrine\ORM\PersistentCollection {#117 …}
    +awards: Doctrine\ORM\PersistentCollection {#106 …}
    +categories: Doctrine\ORM\PersistentCollection {#93 …}
    -id: 46
    +apId: "sewingrepairing@sh.itjust.works"
    +apProfileId: "https://sh.itjust.works/c/sewingrepairing"
    +apPublicUrl: "https://sh.itjust.works/c/sewingrepairing"
    +apFollowersUrl: "https://sh.itjust.works/c/sewingrepairing/followers"
    +apInboxUrl: "https://sh.itjust.works/inbox"
    +apDomain: "sh.itjust.works"
    +apPreferredUsername: "sewingrepairing"
    +apDiscoverable: true
    +apManuallyApprovesFollowers: null
    +privateKey: null
    +publicKey: null
    +apFetchedAt: DateTime @1704982925 {#323
      date: 2024-01-11 15:22:05.0 +01:00
    }
    +apDeletedAt: null
    +apTimeoutAt: null
    +visibility: "visible             "
    +createdAt: DateTimeImmutable @1696972006 {#326
      date: 2023-10-10 23:06:46.0 +02:00
    }
  }
  +image: null
  +domain: Proxies\__CG__\App\Entity\Domain {#1955 …}
  +slug: "bought-used-machine-needle-broke-diagnosis-needed"
  +title: "bought used machine - needle broke - diagnosis needed"
  +url: null
  +body: """
    cross-posted from: [slrpnk.net/post/3317096](https://slrpnk.net/post/3317096)\n
    \n
    > I bought [this machine from the 1960s](https://ia802906.us.archive.org/28/items/singer-237-user-manual-en_202005/Singer-237_User-Manual_EN.pdf) (cost: 12 Big Macs). I did not clean it or oil it as I wanted to just see if it works.\n
    > \n
    > It made a straight line without issue. Then on the 2nd straight line the top thread got bundled below the plate. I cleared that & started over. Then went to the narrowest zig-zag setting and the needle broke.\n
    > \n
    > I’m just starting to learn. I know from videos that pushing the fabric while the needle is down can bend the needle and put it in harms way. I don’t think I was pushing or pulling the fabric when the needle broke. So I wonder what would cause this-- does this mean the timing is off and needs adjustment?\n
    > \n
    > I’m not enthusiastic about doing much experimentation at this point because needles seem pricey enough that I don’t want to break many (1¼ the cost of a Big Mac in my area buys 5 needles). But I just removed the top thread and bobbin and installed the empty bobbin case. When I manually spin the wheel with no thread at various zig-zig widths, there is no apparent contact with the needle. So perhaps the thread occasionally bundling up under the plate is part of the issue.\n
    > \n
    > *update:* if I load thread and manually crank for the zig-zag patterns, most stitches are missed. The thread is plunged in from the top but does not get grabbed from the bottom most of the time.
    """
  +type: "article"
  +lang: "en"
  +isOc: false
  +hasEmbed: false
  +commentCount: 5
  +favouriteCount: 5
  +score: 0
  +isAdult: false
  +sticky: false
  +lastActive: DateTime @1698159072 {#85
    date: 2023-10-24 16:51:12.0 +02:00
  }
  +ip: null
  +adaAmount: 0
  +tags: null
  +mentions: null
  +comments: Doctrine\ORM\PersistentCollection {#2425 …}
  +votes: Doctrine\ORM\PersistentCollection {#1888 …}
  +reports: Doctrine\ORM\PersistentCollection {#1799 …}
  +favourites: Doctrine\ORM\PersistentCollection {#1977 …}
  +notifications: Doctrine\ORM\PersistentCollection {#1389 …}
  +badges: Doctrine\ORM\PersistentCollection {#1376 …}
  +children: []
  -id: 7070
  -titleTs: "'bought':1 'broke':5 'diagnosi':6 'machin':3 'need':7 'needl':4 'use':2"
  -bodyTs: "'/28/items/singer-237-user-manual-en_202005/singer-237_user-manual_en.pdf)':17 '/post/3317096](https://slrpnk.net/post/3317096)':7 '1':163 '12':19 '1960s':14 '2nd':49 '5':174 'adjust':138 'appar':209 'area':172 'bend':98 'big':20,168 'bobbin':184,189 'bottom':262 'bought':9 'break':161 'broke':77,121 'bundl':56,219 'buy':173 'case':190 'caus':127 'clean':25 'clear':61 'contact':210 'cost':18,165 'crank':236 'cross':2 'cross-post':1 'empti':188 'enough':154 'enthusiast':142 'experiment':146 'fabric':91,117 'get':258 'got':55 'grab':259 'harm':105 'ia802906.us.archive.org':16 'ia802906.us.archive.org/28/items/singer-237-user-manual-en_202005/singer-237_user-manual_en.pdf)':15 'instal':186 'issu':45,228 'know':85 'learn':83 'line':43,51 'load':232 'm':79,140 'mac':21,169 'machin':11 'made':40 'mani':162 'manual':193,235 'mean':131 'miss':246 'much':145 'narrowest':69 'need':137 'needl':76,94,100,120,151,175,213 'occasion':218 'oil':28 'part':225 'pattern':242 'perhap':215 'plate':59,223 'plung':250 'point':149 'post':3 'pricey':153 'pull':115 'push':89,113 'put':102 'remov':179 'see':35 'seem':152 'set':73 'slrpnk.net':6 'slrpnk.net/post/3317096](https://slrpnk.net/post/3317096)':5 'spin':194 'start':63,81 'stitch':244 'straight':42,50 'think':110 'thread':54,182,199,217,233,248 'time':133,266 'top':53,181,254 'updat':229 'various':201 'video':87 'want':32,159 'way':106 'went':66 'wheel':196 'width':205 'without':44 'wonder':124 'work':38 'would':126 'zag':72,241 'zig':71,203,204,240 'zig-zag':70,239 'zig-zig':202"
  +cross: false
  +upVotes: 0
  +downVotes: 0
  +ranking: 1698026295
  +visibility: "visible             "
  +apId: "https://slrpnk.net/post/3317837"
  +editedAt: DateTimeImmutable @1697998555 {#2390
    date: 2023-10-22 20:15:55.0 +02:00
  }
  +createdAt: DateTimeImmutable @1697994795 {#66
    date: 2023-10-22 19:13:15.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS DENIED 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
3 DENIED edit 
App\Entity\Entry {#1832
  +user: Proxies\__CG__\App\Entity\User {#1881 …}
  +magazine: App\Entity\Magazine {#312
    +icon: Proxies\__CG__\App\Entity\Image {#292 …}
    +name: "sewingrepairing@sh.itjust.works"
    +title: "sewingrepairing"
    +description: "A place to share ideas, knowledge and creations with textiles. The focus is on reducing waste, whether that be sewing from the scraps left from other projects, using the end of rolls and remnants, or repairing and remaking finished pieces."
    +rules: null
    +subscriptionsCount: 1
    +entryCount: 11
    +entryCommentCount: 23
    +postCount: 0
    +postCommentCount: 0
    +isAdult: false
    +customCss: null
    +lastActive: DateTime @1728098405 {#320
      date: 2024-10-05 05:20:05.0 +02:00
    }
    +markedForDeletionAt: null
    +tags: null
    +moderators: Doctrine\ORM\PersistentCollection {#283 …}
    +ownershipRequests: Doctrine\ORM\PersistentCollection {#279 …}
    +moderatorRequests: Doctrine\ORM\PersistentCollection {#268 …}
    +entries: Doctrine\ORM\PersistentCollection {#226 …}
    +posts: Doctrine\ORM\PersistentCollection {#184 …}
    +subscriptions: Doctrine\ORM\PersistentCollection {#246 …}
    +bans: Doctrine\ORM\PersistentCollection {#163 …}
    +reports: Doctrine\ORM\PersistentCollection {#149 …}
    +badges: Doctrine\ORM\PersistentCollection {#127 …}
    +logs: Doctrine\ORM\PersistentCollection {#117 …}
    +awards: Doctrine\ORM\PersistentCollection {#106 …}
    +categories: Doctrine\ORM\PersistentCollection {#93 …}
    -id: 46
    +apId: "sewingrepairing@sh.itjust.works"
    +apProfileId: "https://sh.itjust.works/c/sewingrepairing"
    +apPublicUrl: "https://sh.itjust.works/c/sewingrepairing"
    +apFollowersUrl: "https://sh.itjust.works/c/sewingrepairing/followers"
    +apInboxUrl: "https://sh.itjust.works/inbox"
    +apDomain: "sh.itjust.works"
    +apPreferredUsername: "sewingrepairing"
    +apDiscoverable: true
    +apManuallyApprovesFollowers: null
    +privateKey: null
    +publicKey: null
    +apFetchedAt: DateTime @1704982925 {#323
      date: 2024-01-11 15:22:05.0 +01:00
    }
    +apDeletedAt: null
    +apTimeoutAt: null
    +visibility: "visible             "
    +createdAt: DateTimeImmutable @1696972006 {#326
      date: 2023-10-10 23:06:46.0 +02:00
    }
  }
  +image: null
  +domain: Proxies\__CG__\App\Entity\Domain {#1955 …}
  +slug: "bought-used-machine-needle-broke-diagnosis-needed"
  +title: "bought used machine - needle broke - diagnosis needed"
  +url: null
  +body: """
    cross-posted from: [slrpnk.net/post/3317096](https://slrpnk.net/post/3317096)\n
    \n
    > I bought [this machine from the 1960s](https://ia802906.us.archive.org/28/items/singer-237-user-manual-en_202005/Singer-237_User-Manual_EN.pdf) (cost: 12 Big Macs). I did not clean it or oil it as I wanted to just see if it works.\n
    > \n
    > It made a straight line without issue. Then on the 2nd straight line the top thread got bundled below the plate. I cleared that & started over. Then went to the narrowest zig-zag setting and the needle broke.\n
    > \n
    > I’m just starting to learn. I know from videos that pushing the fabric while the needle is down can bend the needle and put it in harms way. I don’t think I was pushing or pulling the fabric when the needle broke. So I wonder what would cause this-- does this mean the timing is off and needs adjustment?\n
    > \n
    > I’m not enthusiastic about doing much experimentation at this point because needles seem pricey enough that I don’t want to break many (1¼ the cost of a Big Mac in my area buys 5 needles). But I just removed the top thread and bobbin and installed the empty bobbin case. When I manually spin the wheel with no thread at various zig-zig widths, there is no apparent contact with the needle. So perhaps the thread occasionally bundling up under the plate is part of the issue.\n
    > \n
    > *update:* if I load thread and manually crank for the zig-zag patterns, most stitches are missed. The thread is plunged in from the top but does not get grabbed from the bottom most of the time.
    """
  +type: "article"
  +lang: "en"
  +isOc: false
  +hasEmbed: false
  +commentCount: 5
  +favouriteCount: 5
  +score: 0
  +isAdult: false
  +sticky: false
  +lastActive: DateTime @1698159072 {#85
    date: 2023-10-24 16:51:12.0 +02:00
  }
  +ip: null
  +adaAmount: 0
  +tags: null
  +mentions: null
  +comments: Doctrine\ORM\PersistentCollection {#2425 …}
  +votes: Doctrine\ORM\PersistentCollection {#1888 …}
  +reports: Doctrine\ORM\PersistentCollection {#1799 …}
  +favourites: Doctrine\ORM\PersistentCollection {#1977 …}
  +notifications: Doctrine\ORM\PersistentCollection {#1389 …}
  +badges: Doctrine\ORM\PersistentCollection {#1376 …}
  +children: []
  -id: 7070
  -titleTs: "'bought':1 'broke':5 'diagnosi':6 'machin':3 'need':7 'needl':4 'use':2"
  -bodyTs: "'/28/items/singer-237-user-manual-en_202005/singer-237_user-manual_en.pdf)':17 '/post/3317096](https://slrpnk.net/post/3317096)':7 '1':163 '12':19 '1960s':14 '2nd':49 '5':174 'adjust':138 'appar':209 'area':172 'bend':98 'big':20,168 'bobbin':184,189 'bottom':262 'bought':9 'break':161 'broke':77,121 'bundl':56,219 'buy':173 'case':190 'caus':127 'clean':25 'clear':61 'contact':210 'cost':18,165 'crank':236 'cross':2 'cross-post':1 'empti':188 'enough':154 'enthusiast':142 'experiment':146 'fabric':91,117 'get':258 'got':55 'grab':259 'harm':105 'ia802906.us.archive.org':16 'ia802906.us.archive.org/28/items/singer-237-user-manual-en_202005/singer-237_user-manual_en.pdf)':15 'instal':186 'issu':45,228 'know':85 'learn':83 'line':43,51 'load':232 'm':79,140 'mac':21,169 'machin':11 'made':40 'mani':162 'manual':193,235 'mean':131 'miss':246 'much':145 'narrowest':69 'need':137 'needl':76,94,100,120,151,175,213 'occasion':218 'oil':28 'part':225 'pattern':242 'perhap':215 'plate':59,223 'plung':250 'point':149 'post':3 'pricey':153 'pull':115 'push':89,113 'put':102 'remov':179 'see':35 'seem':152 'set':73 'slrpnk.net':6 'slrpnk.net/post/3317096](https://slrpnk.net/post/3317096)':5 'spin':194 'start':63,81 'stitch':244 'straight':42,50 'think':110 'thread':54,182,199,217,233,248 'time':133,266 'top':53,181,254 'updat':229 'various':201 'video':87 'want':32,159 'way':106 'went':66 'wheel':196 'width':205 'without':44 'wonder':124 'work':38 'would':126 'zag':72,241 'zig':71,203,204,240 'zig-zag':70,239 'zig-zig':202"
  +cross: false
  +upVotes: 0
  +downVotes: 0
  +ranking: 1698026295
  +visibility: "visible             "
  +apId: "https://slrpnk.net/post/3317837"
  +editedAt: DateTimeImmutable @1697998555 {#2390
    date: 2023-10-22 20:15:55.0 +02:00
  }
  +createdAt: DateTimeImmutable @1697994795 {#66
    date: 2023-10-22 19:13:15.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS DENIED 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
4 DENIED moderate 
App\Entity\Entry {#1832
  +user: Proxies\__CG__\App\Entity\User {#1881 …}
  +magazine: App\Entity\Magazine {#312
    +icon: Proxies\__CG__\App\Entity\Image {#292 …}
    +name: "sewingrepairing@sh.itjust.works"
    +title: "sewingrepairing"
    +description: "A place to share ideas, knowledge and creations with textiles. The focus is on reducing waste, whether that be sewing from the scraps left from other projects, using the end of rolls and remnants, or repairing and remaking finished pieces."
    +rules: null
    +subscriptionsCount: 1
    +entryCount: 11
    +entryCommentCount: 23
    +postCount: 0
    +postCommentCount: 0
    +isAdult: false
    +customCss: null
    +lastActive: DateTime @1728098405 {#320
      date: 2024-10-05 05:20:05.0 +02:00
    }
    +markedForDeletionAt: null
    +tags: null
    +moderators: Doctrine\ORM\PersistentCollection {#283 …}
    +ownershipRequests: Doctrine\ORM\PersistentCollection {#279 …}
    +moderatorRequests: Doctrine\ORM\PersistentCollection {#268 …}
    +entries: Doctrine\ORM\PersistentCollection {#226 …}
    +posts: Doctrine\ORM\PersistentCollection {#184 …}
    +subscriptions: Doctrine\ORM\PersistentCollection {#246 …}
    +bans: Doctrine\ORM\PersistentCollection {#163 …}
    +reports: Doctrine\ORM\PersistentCollection {#149 …}
    +badges: Doctrine\ORM\PersistentCollection {#127 …}
    +logs: Doctrine\ORM\PersistentCollection {#117 …}
    +awards: Doctrine\ORM\PersistentCollection {#106 …}
    +categories: Doctrine\ORM\PersistentCollection {#93 …}
    -id: 46
    +apId: "sewingrepairing@sh.itjust.works"
    +apProfileId: "https://sh.itjust.works/c/sewingrepairing"
    +apPublicUrl: "https://sh.itjust.works/c/sewingrepairing"
    +apFollowersUrl: "https://sh.itjust.works/c/sewingrepairing/followers"
    +apInboxUrl: "https://sh.itjust.works/inbox"
    +apDomain: "sh.itjust.works"
    +apPreferredUsername: "sewingrepairing"
    +apDiscoverable: true
    +apManuallyApprovesFollowers: null
    +privateKey: null
    +publicKey: null
    +apFetchedAt: DateTime @1704982925 {#323
      date: 2024-01-11 15:22:05.0 +01:00
    }
    +apDeletedAt: null
    +apTimeoutAt: null
    +visibility: "visible             "
    +createdAt: DateTimeImmutable @1696972006 {#326
      date: 2023-10-10 23:06:46.0 +02:00
    }
  }
  +image: null
  +domain: Proxies\__CG__\App\Entity\Domain {#1955 …}
  +slug: "bought-used-machine-needle-broke-diagnosis-needed"
  +title: "bought used machine - needle broke - diagnosis needed"
  +url: null
  +body: """
    cross-posted from: [slrpnk.net/post/3317096](https://slrpnk.net/post/3317096)\n
    \n
    > I bought [this machine from the 1960s](https://ia802906.us.archive.org/28/items/singer-237-user-manual-en_202005/Singer-237_User-Manual_EN.pdf) (cost: 12 Big Macs). I did not clean it or oil it as I wanted to just see if it works.\n
    > \n
    > It made a straight line without issue. Then on the 2nd straight line the top thread got bundled below the plate. I cleared that & started over. Then went to the narrowest zig-zag setting and the needle broke.\n
    > \n
    > I’m just starting to learn. I know from videos that pushing the fabric while the needle is down can bend the needle and put it in harms way. I don’t think I was pushing or pulling the fabric when the needle broke. So I wonder what would cause this-- does this mean the timing is off and needs adjustment?\n
    > \n
    > I’m not enthusiastic about doing much experimentation at this point because needles seem pricey enough that I don’t want to break many (1¼ the cost of a Big Mac in my area buys 5 needles). But I just removed the top thread and bobbin and installed the empty bobbin case. When I manually spin the wheel with no thread at various zig-zig widths, there is no apparent contact with the needle. So perhaps the thread occasionally bundling up under the plate is part of the issue.\n
    > \n
    > *update:* if I load thread and manually crank for the zig-zag patterns, most stitches are missed. The thread is plunged in from the top but does not get grabbed from the bottom most of the time.
    """
  +type: "article"
  +lang: "en"
  +isOc: false
  +hasEmbed: false
  +commentCount: 5
  +favouriteCount: 5
  +score: 0
  +isAdult: false
  +sticky: false
  +lastActive: DateTime @1698159072 {#85
    date: 2023-10-24 16:51:12.0 +02:00
  }
  +ip: null
  +adaAmount: 0
  +tags: null
  +mentions: null
  +comments: Doctrine\ORM\PersistentCollection {#2425 …}
  +votes: Doctrine\ORM\PersistentCollection {#1888 …}
  +reports: Doctrine\ORM\PersistentCollection {#1799 …}
  +favourites: Doctrine\ORM\PersistentCollection {#1977 …}
  +notifications: Doctrine\ORM\PersistentCollection {#1389 …}
  +badges: Doctrine\ORM\PersistentCollection {#1376 …}
  +children: []
  -id: 7070
  -titleTs: "'bought':1 'broke':5 'diagnosi':6 'machin':3 'need':7 'needl':4 'use':2"
  -bodyTs: "'/28/items/singer-237-user-manual-en_202005/singer-237_user-manual_en.pdf)':17 '/post/3317096](https://slrpnk.net/post/3317096)':7 '1':163 '12':19 '1960s':14 '2nd':49 '5':174 'adjust':138 'appar':209 'area':172 'bend':98 'big':20,168 'bobbin':184,189 'bottom':262 'bought':9 'break':161 'broke':77,121 'bundl':56,219 'buy':173 'case':190 'caus':127 'clean':25 'clear':61 'contact':210 'cost':18,165 'crank':236 'cross':2 'cross-post':1 'empti':188 'enough':154 'enthusiast':142 'experiment':146 'fabric':91,117 'get':258 'got':55 'grab':259 'harm':105 'ia802906.us.archive.org':16 'ia802906.us.archive.org/28/items/singer-237-user-manual-en_202005/singer-237_user-manual_en.pdf)':15 'instal':186 'issu':45,228 'know':85 'learn':83 'line':43,51 'load':232 'm':79,140 'mac':21,169 'machin':11 'made':40 'mani':162 'manual':193,235 'mean':131 'miss':246 'much':145 'narrowest':69 'need':137 'needl':76,94,100,120,151,175,213 'occasion':218 'oil':28 'part':225 'pattern':242 'perhap':215 'plate':59,223 'plung':250 'point':149 'post':3 'pricey':153 'pull':115 'push':89,113 'put':102 'remov':179 'see':35 'seem':152 'set':73 'slrpnk.net':6 'slrpnk.net/post/3317096](https://slrpnk.net/post/3317096)':5 'spin':194 'start':63,81 'stitch':244 'straight':42,50 'think':110 'thread':54,182,199,217,233,248 'time':133,266 'top':53,181,254 'updat':229 'various':201 'video':87 'want':32,159 'way':106 'went':66 'wheel':196 'width':205 'without':44 'wonder':124 'work':38 'would':126 'zag':72,241 'zig':71,203,204,240 'zig-zag':70,239 'zig-zig':202"
  +cross: false
  +upVotes: 0
  +downVotes: 0
  +ranking: 1698026295
  +visibility: "visible             "
  +apId: "https://slrpnk.net/post/3317837"
  +editedAt: DateTimeImmutable @1697998555 {#2390
    date: 2023-10-22 20:15:55.0 +02:00
  }
  +createdAt: DateTimeImmutable @1697994795 {#66
    date: 2023-10-22 19:13:15.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS DENIED 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
5 DENIED edit 
App\Entity\Magazine {#312
  +icon: Proxies\__CG__\App\Entity\Image {#292 …}
  +name: "sewingrepairing@sh.itjust.works"
  +title: "sewingrepairing"
  +description: "A place to share ideas, knowledge and creations with textiles. The focus is on reducing waste, whether that be sewing from the scraps left from other projects, using the end of rolls and remnants, or repairing and remaking finished pieces."
  +rules: null
  +subscriptionsCount: 1
  +entryCount: 11
  +entryCommentCount: 23
  +postCount: 0
  +postCommentCount: 0
  +isAdult: false
  +customCss: null
  +lastActive: DateTime @1728098405 {#320
    date: 2024-10-05 05:20:05.0 +02:00
  }
  +markedForDeletionAt: null
  +tags: null
  +moderators: Doctrine\ORM\PersistentCollection {#283 …}
  +ownershipRequests: Doctrine\ORM\PersistentCollection {#279 …}
  +moderatorRequests: Doctrine\ORM\PersistentCollection {#268 …}
  +entries: Doctrine\ORM\PersistentCollection {#226 …}
  +posts: Doctrine\ORM\PersistentCollection {#184 …}
  +subscriptions: Doctrine\ORM\PersistentCollection {#246 …}
  +bans: Doctrine\ORM\PersistentCollection {#163 …}
  +reports: Doctrine\ORM\PersistentCollection {#149 …}
  +badges: Doctrine\ORM\PersistentCollection {#127 …}
  +logs: Doctrine\ORM\PersistentCollection {#117 …}
  +awards: Doctrine\ORM\PersistentCollection {#106 …}
  +categories: Doctrine\ORM\PersistentCollection {#93 …}
  -id: 46
  +apId: "sewingrepairing@sh.itjust.works"
  +apProfileId: "https://sh.itjust.works/c/sewingrepairing"
  +apPublicUrl: "https://sh.itjust.works/c/sewingrepairing"
  +apFollowersUrl: "https://sh.itjust.works/c/sewingrepairing/followers"
  +apInboxUrl: "https://sh.itjust.works/inbox"
  +apDomain: "sh.itjust.works"
  +apPreferredUsername: "sewingrepairing"
  +apDiscoverable: true
  +apManuallyApprovesFollowers: null
  +privateKey: null
  +publicKey: null
  +apFetchedAt: DateTime @1704982925 {#323
    date: 2024-01-11 15:22:05.0 +01:00
  }
  +apDeletedAt: null
  +apTimeoutAt: null
  +visibility: "visible             "
  +createdAt: DateTimeImmutable @1696972006 {#326
    date: 2023-10-10 23:06:46.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS DENIED 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details