Symfony Profiler

Security

Token

There is no security token.

Firewall

main Name

Security enabled

Stateless

Configuration

Key	Value
provider	security.user.provider.concrete.app_user_provider
context	main
entry_point	App\Security\KbinAuthenticator
user_checker	App\Security\UserChecker
access_denied_handler	(none)
access_denied_url	(none)
authenticators	[`"two_factor" "remember_me" "App\Security\KbinAuthenticator" "App\Security\FacebookAuthenticator" "App\Security\GoogleAuthenticator" "App\Security\GithubAuthenticator" "App\Security\KeycloakAuthenticator"`]

Listeners

Listener	Duration	Response
Symfony\Component\Security\Http\Firewall\ChannelListener {#723`-map: Symfony\Component\Security\Http\AccessMap {#722 …} -logger: Monolog\Logger {#783 …} -httpPort: 80 -httpsPort: 443`}	0.00 ms	(none)
Symfony\Component\Security\Http\Firewall\ContextListener {#706-tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\TokenStorage {#1017 …} -sessionKey: "_security_main" -logger: Monolog\Logger {#783 …} -userProviders: Symfony\Component\DependencyInjection\Argument\RewindableGenerator {#705 …} -dispatcher: Symfony\Component\EventDispatcher\Debug\TraceableEventDispatcher {#747 …} -registered: false -trustResolver: Scheb\TwoFactorBundle\Security\Authentication\AuthenticationTrustResolver {#780 …} -sessionTrackerEnabler: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage::enableUsageTracking(): void {#703 …}}	0.16 ms	(none)
Symfony\Component\Security\Http\Firewall\AuthenticatorManagerListener {#584`-authenticatorManager: Symfony\Component\Security\Http\Authentication\AuthenticatorManager {#595 …}`}	0.00 ms	(none)
Scheb\TwoFactorBundle\Security\Http\Firewall\TwoFactorAccessListener {#582`-twoFactorFirewallConfig: Scheb\TwoFactorBundle\Security\TwoFactor\TwoFactorFirewallConfig {#842 …} -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …} -twoFactorAccessDecider: Scheb\TwoFactorBundle\Security\Authorization\TwoFactorAccessDecider {#581 …}`}	0.04 ms	(none)
Symfony\Component\Security\Http\Firewall\AccessListener {#579`-tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …} -accessDecisionManager: Symfony\Component\Security\Core\Authorization\TraceableAccessDecisionManager {#937 …} -map: Symfony\Component\Security\Http\AccessMap {#722 …}`}	0.00 ms	(none)
Symfony\Component\Security\Http\Firewall\LogoutListener {#786`-tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …} -options: [ "csrf_parameter" => "_csrf_token" "csrf_token_id" => "logout" "logout_path" => "app_logout" ] -httpUtils: Symfony\Component\Security\Http\HttpUtils {#841 …} -csrfTokenManager: Symfony\Component\Security\Csrf\CsrfTokenManager {#1015 …} -eventDispatcher: Symfony\Component\EventDispatcher\Debug\TraceableEventDispatcher {#747 …}`}	0.00 ms	(none)

Authenticators

No authenticators have been recorded. Check previous profiles on your authentication endpoint.

Access Decision

affirmative Strategy


"Symfony\Component\Security\Core\Authorization\Voter\AuthenticatedVoter"
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
"Symfony\Component\Security\Core\Authorization\Voter\ExpressionVoter"
"App\Security\Voter\EntryCommentVoter"
"App\Security\Voter\EntryVoter"
"App\Security\Voter\MagazineVoter"
"App\Security\Voter\MessageThreadVoter"
"App\Security\Voter\MessageVoter"
"App\Security\Voter\NotificationVoter"
"App\Security\Voter\OAuth2UserConsentVoter"
"App\Security\Voter\PostCommentVoter"
"App\Security\Voter\PostVoter"
"App\Security\Voter\UserVoter"

#	Voter class
1	"Symfony\Component\Security\Core\Authorization\Voter\AuthenticatedVoter"
2	"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
3	"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
4	"Symfony\Component\Security\Core\Authorization\Voter\ExpressionVoter"
5	"App\Security\Voter\EntryCommentVoter"
6	"App\Security\Voter\EntryVoter"
7	"App\Security\Voter\MagazineVoter"
8	"App\Security\Voter\MessageThreadVoter"
9	"App\Security\Voter\MessageVoter"
10	"App\Security\Voter\NotificationVoter"
11	"App\Security\Voter\OAuth2UserConsentVoter"
12	"App\Security\Voter\PostCommentVoter"
13	"App\Security\Voter\PostVoter"
14	"App\Security\Voter\UserVoter"

Access decision log


null
"App\Security\Voter\UserVoter"
App\Entity\Entry {#2388
  +user: Proxies\__CG__\App\Entity\User {#1943 …}
  +magazine: App\Entity\Magazine {#266
    +icon: Proxies\__CG__\App\Entity\Image {#247 …}
    +name: "askelectronics@discuss.tchncs.de"
    +title: "askelectronics"
    +description: """
      **For questions about component-level electronic circuits, tools and equipment.**\n
      \n
      Rules\n
      -----\n
      \n
      1: Be nice.\n
      \n
      2: Be on-topic (eg: *Electronic*, not *electrical*).\n
      \n
      3: No commercial stuff, buying, selling or valuations.\n
      \n
      4: Be safe.\n
      \n
      ---
      """
    +rules: null
    +subscriptionsCount: 1
    +entryCount: 154
    +entryCommentCount: 1230
    +postCount: 1
    +postCommentCount: 4
    +isAdult: false
    +customCss: null
    +lastActive: DateTime @1729413608 {#276
      date: 2024-10-20 10:40:08.0 +02:00
    }
    +markedForDeletionAt: null
    +tags: null
    +moderators: Doctrine\ORM\PersistentCollection {#238 …}
    +ownershipRequests: Doctrine\ORM\PersistentCollection {#234 …}
    +moderatorRequests: Doctrine\ORM\PersistentCollection {#223 …}
    +entries: Doctrine\ORM\PersistentCollection {#181 …}
    +posts: Doctrine\ORM\PersistentCollection {#139 …}
    +subscriptions: Doctrine\ORM\PersistentCollection {#201 …}
    +bans: Doctrine\ORM\PersistentCollection {#118 …}
    +reports: Doctrine\ORM\PersistentCollection {#104 …}
    +badges: Doctrine\ORM\PersistentCollection {#82 …}
    +logs: Doctrine\ORM\PersistentCollection {#72 …}
    +awards: Doctrine\ORM\PersistentCollection {#61 …}
    +categories: Doctrine\ORM\PersistentCollection {#1820 …}
    -id: 11
    +apId: "askelectronics@discuss.tchncs.de"
    +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
    +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
    +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
    +apInboxUrl: "https://discuss.tchncs.de/inbox"
    +apDomain: "discuss.tchncs.de"
    +apPreferredUsername: "askelectronics"
    +apDiscoverable: true
    +apManuallyApprovesFollowers: null
    +privateKey: null
    +publicKey: null
    +apFetchedAt: DateTime @1727247714 {#270
      date: 2024-09-25 09:01:54.0 +02:00
    }
    +apDeletedAt: null
    +apTimeoutAt: null
    +visibility: "visible             "
    +createdAt: DateTimeImmutable @1687144409 {#272
      date: 2023-06-19 05:13:29.0 +02:00
    }
  }
  +image: null
  +domain: Proxies\__CG__\App\Entity\Domain {#1912 …}
  +slug: "Would-this-circuit-to-use-an-HR202-humidity-sensor-actually"
  +title: "Would this circuit to use an HR202 humidity sensor actually work?"
  +url: null
  +body: """
    ![](https://discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)\n
    \n
    I wanna run a HR202 moisture sensor and an Arduino. Yes, I picked a HR202 to challenge myself to make it work. I already have some easier-to-use SHT40 in stock.\n
    \n
    This sensor can only run with AC 1.5Vpeak max. So, I’ve created this little circuit to provide AC, and I’ll only read it when the oscillator output is HIGH, so I can read it briefly at the same time with the help of Arduino’s ADC. Could this circuit work? Thank you.
    """
  +type: "article"
  +lang: "en"
  +isOc: false
  +hasEmbed: false
  +commentCount: 4
  +favouriteCount: 1
  +score: 0
  +isAdult: false
  +sticky: false
  +lastActive: DateTime @1688761530 {#2410
    date: 2023-07-07 22:25:30.0 +02:00
  }
  +ip: null
  +adaAmount: 0
  +tags: null
  +mentions: null
  +comments: Doctrine\ORM\PersistentCollection {#1866 …}
  +votes: Doctrine\ORM\PersistentCollection {#1978 …}
  +reports: Doctrine\ORM\PersistentCollection {#1946 …}
  +favourites: Doctrine\ORM\PersistentCollection {#1971 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2443 …}
  +badges: Doctrine\ORM\PersistentCollection {#2426 …}
  +children: []
  -id: 875
  -titleTs: "'actual':10 'circuit':3 'hr202':7 'humid':8 'sensor':9 'use':5 'work':11 'would':1"
  -bodyTs: "'/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':3 '1.5':44 'ac':43,56 'adc':85 'alreadi':27 'arduino':13,83 'briefli':74 'challeng':20 'circuit':53,88 'could':86 'creat':50 'discuss.tchncs.de':2 'discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':1 'easier':31 'easier-to-us':30 'help':81 'high':68 'hr202':8,18 'littl':52 'll':59 'make':23 'max':46 'moistur':9 'oscil':65 'output':66 'pick':16 'provid':55 'read':61,72 'run':6,41 'sensor':10,38 'sht40':34 'stock':36 'thank':90 'time':78 'use':33 've':49 'vpeak':45 'wanna':5 'work':25,89 'yes':14"
  +cross: false
  +upVotes: 0
  +downVotes: 0
  +ranking: 1688598501
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/post/505309"
  +editedAt: null
  +createdAt: DateTimeImmutable @1688582501 {#1850
    date: 2023-07-05 20:41:41.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\Entry {#2388
  +user: Proxies\__CG__\App\Entity\User {#1943 …}
  +magazine: App\Entity\Magazine {#266
    +icon: Proxies\__CG__\App\Entity\Image {#247 …}
    +name: "askelectronics@discuss.tchncs.de"
    +title: "askelectronics"
    +description: """
      **For questions about component-level electronic circuits, tools and equipment.**\n
      \n
      Rules\n
      -----\n
      \n
      1: Be nice.\n
      \n
      2: Be on-topic (eg: *Electronic*, not *electrical*).\n
      \n
      3: No commercial stuff, buying, selling or valuations.\n
      \n
      4: Be safe.\n
      \n
      ---
      """
    +rules: null
    +subscriptionsCount: 1
    +entryCount: 154
    +entryCommentCount: 1230
    +postCount: 1
    +postCommentCount: 4
    +isAdult: false
    +customCss: null
    +lastActive: DateTime @1729413608 {#276
      date: 2024-10-20 10:40:08.0 +02:00
    }
    +markedForDeletionAt: null
    +tags: null
    +moderators: Doctrine\ORM\PersistentCollection {#238 …}
    +ownershipRequests: Doctrine\ORM\PersistentCollection {#234 …}
    +moderatorRequests: Doctrine\ORM\PersistentCollection {#223 …}
    +entries: Doctrine\ORM\PersistentCollection {#181 …}
    +posts: Doctrine\ORM\PersistentCollection {#139 …}
    +subscriptions: Doctrine\ORM\PersistentCollection {#201 …}
    +bans: Doctrine\ORM\PersistentCollection {#118 …}
    +reports: Doctrine\ORM\PersistentCollection {#104 …}
    +badges: Doctrine\ORM\PersistentCollection {#82 …}
    +logs: Doctrine\ORM\PersistentCollection {#72 …}
    +awards: Doctrine\ORM\PersistentCollection {#61 …}
    +categories: Doctrine\ORM\PersistentCollection {#1820 …}
    -id: 11
    +apId: "askelectronics@discuss.tchncs.de"
    +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
    +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
    +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
    +apInboxUrl: "https://discuss.tchncs.de/inbox"
    +apDomain: "discuss.tchncs.de"
    +apPreferredUsername: "askelectronics"
    +apDiscoverable: true
    +apManuallyApprovesFollowers: null
    +privateKey: null
    +publicKey: null
    +apFetchedAt: DateTime @1727247714 {#270
      date: 2024-09-25 09:01:54.0 +02:00
    }
    +apDeletedAt: null
    +apTimeoutAt: null
    +visibility: "visible             "
    +createdAt: DateTimeImmutable @1687144409 {#272
      date: 2023-06-19 05:13:29.0 +02:00
    }
  }
  +image: null
  +domain: Proxies\__CG__\App\Entity\Domain {#1912 …}
  +slug: "Would-this-circuit-to-use-an-HR202-humidity-sensor-actually"
  +title: "Would this circuit to use an HR202 humidity sensor actually work?"
  +url: null
  +body: """
    ![](https://discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)\n
    \n
    I wanna run a HR202 moisture sensor and an Arduino. Yes, I picked a HR202 to challenge myself to make it work. I already have some easier-to-use SHT40 in stock.\n
    \n
    This sensor can only run with AC 1.5Vpeak max. So, I’ve created this little circuit to provide AC, and I’ll only read it when the oscillator output is HIGH, so I can read it briefly at the same time with the help of Arduino’s ADC. Could this circuit work? Thank you.
    """
  +type: "article"
  +lang: "en"
  +isOc: false
  +hasEmbed: false
  +commentCount: 4
  +favouriteCount: 1
  +score: 0
  +isAdult: false
  +sticky: false
  +lastActive: DateTime @1688761530 {#2410
    date: 2023-07-07 22:25:30.0 +02:00
  }
  +ip: null
  +adaAmount: 0
  +tags: null
  +mentions: null
  +comments: Doctrine\ORM\PersistentCollection {#1866 …}
  +votes: Doctrine\ORM\PersistentCollection {#1978 …}
  +reports: Doctrine\ORM\PersistentCollection {#1946 …}
  +favourites: Doctrine\ORM\PersistentCollection {#1971 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2443 …}
  +badges: Doctrine\ORM\PersistentCollection {#2426 …}
  +children: []
  -id: 875
  -titleTs: "'actual':10 'circuit':3 'hr202':7 'humid':8 'sensor':9 'use':5 'work':11 'would':1"
  -bodyTs: "'/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':3 '1.5':44 'ac':43,56 'adc':85 'alreadi':27 'arduino':13,83 'briefli':74 'challeng':20 'circuit':53,88 'could':86 'creat':50 'discuss.tchncs.de':2 'discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':1 'easier':31 'easier-to-us':30 'help':81 'high':68 'hr202':8,18 'littl':52 'll':59 'make':23 'max':46 'moistur':9 'oscil':65 'output':66 'pick':16 'provid':55 'read':61,72 'run':6,41 'sensor':10,38 'sht40':34 'stock':36 'thank':90 'time':78 'use':33 've':49 'vpeak':45 'wanna':5 'work':25,89 'yes':14"
  +cross: false
  +upVotes: 0
  +downVotes: 0
  +ranking: 1688598501
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/post/505309"
  +editedAt: null
  +createdAt: DateTimeImmutable @1688582501 {#1850
    date: 2023-07-05 20:41:41.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\Entry {#2388
  +user: Proxies\__CG__\App\Entity\User {#1943 …}
  +magazine: App\Entity\Magazine {#266
    +icon: Proxies\__CG__\App\Entity\Image {#247 …}
    +name: "askelectronics@discuss.tchncs.de"
    +title: "askelectronics"
    +description: """
      **For questions about component-level electronic circuits, tools and equipment.**\n
      \n
      Rules\n
      -----\n
      \n
      1: Be nice.\n
      \n
      2: Be on-topic (eg: *Electronic*, not *electrical*).\n
      \n
      3: No commercial stuff, buying, selling or valuations.\n
      \n
      4: Be safe.\n
      \n
      ---
      """
    +rules: null
    +subscriptionsCount: 1
    +entryCount: 154
    +entryCommentCount: 1230
    +postCount: 1
    +postCommentCount: 4
    +isAdult: false
    +customCss: null
    +lastActive: DateTime @1729413608 {#276
      date: 2024-10-20 10:40:08.0 +02:00
    }
    +markedForDeletionAt: null
    +tags: null
    +moderators: Doctrine\ORM\PersistentCollection {#238 …}
    +ownershipRequests: Doctrine\ORM\PersistentCollection {#234 …}
    +moderatorRequests: Doctrine\ORM\PersistentCollection {#223 …}
    +entries: Doctrine\ORM\PersistentCollection {#181 …}
    +posts: Doctrine\ORM\PersistentCollection {#139 …}
    +subscriptions: Doctrine\ORM\PersistentCollection {#201 …}
    +bans: Doctrine\ORM\PersistentCollection {#118 …}
    +reports: Doctrine\ORM\PersistentCollection {#104 …}
    +badges: Doctrine\ORM\PersistentCollection {#82 …}
    +logs: Doctrine\ORM\PersistentCollection {#72 …}
    +awards: Doctrine\ORM\PersistentCollection {#61 …}
    +categories: Doctrine\ORM\PersistentCollection {#1820 …}
    -id: 11
    +apId: "askelectronics@discuss.tchncs.de"
    +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
    +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
    +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
    +apInboxUrl: "https://discuss.tchncs.de/inbox"
    +apDomain: "discuss.tchncs.de"
    +apPreferredUsername: "askelectronics"
    +apDiscoverable: true
    +apManuallyApprovesFollowers: null
    +privateKey: null
    +publicKey: null
    +apFetchedAt: DateTime @1727247714 {#270
      date: 2024-09-25 09:01:54.0 +02:00
    }
    +apDeletedAt: null
    +apTimeoutAt: null
    +visibility: "visible             "
    +createdAt: DateTimeImmutable @1687144409 {#272
      date: 2023-06-19 05:13:29.0 +02:00
    }
  }
  +image: null
  +domain: Proxies\__CG__\App\Entity\Domain {#1912 …}
  +slug: "Would-this-circuit-to-use-an-HR202-humidity-sensor-actually"
  +title: "Would this circuit to use an HR202 humidity sensor actually work?"
  +url: null
  +body: """
    ![](https://discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)\n
    \n
    I wanna run a HR202 moisture sensor and an Arduino. Yes, I picked a HR202 to challenge myself to make it work. I already have some easier-to-use SHT40 in stock.\n
    \n
    This sensor can only run with AC 1.5Vpeak max. So, I’ve created this little circuit to provide AC, and I’ll only read it when the oscillator output is HIGH, so I can read it briefly at the same time with the help of Arduino’s ADC. Could this circuit work? Thank you.
    """
  +type: "article"
  +lang: "en"
  +isOc: false
  +hasEmbed: false
  +commentCount: 4
  +favouriteCount: 1
  +score: 0
  +isAdult: false
  +sticky: false
  +lastActive: DateTime @1688761530 {#2410
    date: 2023-07-07 22:25:30.0 +02:00
  }
  +ip: null
  +adaAmount: 0
  +tags: null
  +mentions: null
  +comments: Doctrine\ORM\PersistentCollection {#1866 …}
  +votes: Doctrine\ORM\PersistentCollection {#1978 …}
  +reports: Doctrine\ORM\PersistentCollection {#1946 …}
  +favourites: Doctrine\ORM\PersistentCollection {#1971 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2443 …}
  +badges: Doctrine\ORM\PersistentCollection {#2426 …}
  +children: []
  -id: 875
  -titleTs: "'actual':10 'circuit':3 'hr202':7 'humid':8 'sensor':9 'use':5 'work':11 'would':1"
  -bodyTs: "'/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':3 '1.5':44 'ac':43,56 'adc':85 'alreadi':27 'arduino':13,83 'briefli':74 'challeng':20 'circuit':53,88 'could':86 'creat':50 'discuss.tchncs.de':2 'discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':1 'easier':31 'easier-to-us':30 'help':81 'high':68 'hr202':8,18 'littl':52 'll':59 'make':23 'max':46 'moistur':9 'oscil':65 'output':66 'pick':16 'provid':55 'read':61,72 'run':6,41 'sensor':10,38 'sht40':34 'stock':36 'thank':90 'time':78 'use':33 've':49 'vpeak':45 'wanna':5 'work':25,89 'yes':14"
  +cross: false
  +upVotes: 0
  +downVotes: 0
  +ranking: 1688598501
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/post/505309"
  +editedAt: null
  +createdAt: DateTimeImmutable @1688582501 {#1850
    date: 2023-07-05 20:41:41.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
null
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4030
  +user: App\Entity\User {#3978 …}
  +entry: App\Entity\Entry {#2388
    +user: Proxies\__CG__\App\Entity\User {#1943 …}
    +magazine: App\Entity\Magazine {#266
      +icon: Proxies\__CG__\App\Entity\Image {#247 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#276
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#238 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#234 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#223 …}
      +entries: Doctrine\ORM\PersistentCollection {#181 …}
      +posts: Doctrine\ORM\PersistentCollection {#139 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#201 …}
      +bans: Doctrine\ORM\PersistentCollection {#118 …}
      +reports: Doctrine\ORM\PersistentCollection {#104 …}
      +badges: Doctrine\ORM\PersistentCollection {#82 …}
      +logs: Doctrine\ORM\PersistentCollection {#72 …}
      +awards: Doctrine\ORM\PersistentCollection {#61 …}
      +categories: Doctrine\ORM\PersistentCollection {#1820 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#270
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#272
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1912 …}
    +slug: "Would-this-circuit-to-use-an-HR202-humidity-sensor-actually"
    +title: "Would this circuit to use an HR202 humidity sensor actually work?"
    +url: null
    +body: """
      ![](https://discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)\n
      \n
      I wanna run a HR202 moisture sensor and an Arduino. Yes, I picked a HR202 to challenge myself to make it work. I already have some easier-to-use SHT40 in stock.\n
      \n
      This sensor can only run with AC 1.5Vpeak max. So, I’ve created this little circuit to provide AC, and I’ll only read it when the oscillator output is HIGH, so I can read it briefly at the same time with the help of Arduino’s ADC. Could this circuit work? Thank you.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 4
    +favouriteCount: 1
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1688761530 {#2410
      date: 2023-07-07 22:25:30.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1866 …}
    +votes: Doctrine\ORM\PersistentCollection {#1978 …}
    +reports: Doctrine\ORM\PersistentCollection {#1946 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1971 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2443 …}
    +badges: Doctrine\ORM\PersistentCollection {#2426 …}
    +children: []
    -id: 875
    -titleTs: "'actual':10 'circuit':3 'hr202':7 'humid':8 'sensor':9 'use':5 'work':11 'would':1"
    -bodyTs: "'/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':3 '1.5':44 'ac':43,56 'adc':85 'alreadi':27 'arduino':13,83 'briefli':74 'challeng':20 'circuit':53,88 'could':86 'creat':50 'discuss.tchncs.de':2 'discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':1 'easier':31 'easier-to-us':30 'help':81 'high':68 'hr202':8,18 'littl':52 'll':59 'make':23 'max':46 'moistur':9 'oscil':65 'output':66 'pick':16 'provid':55 'read':61,72 'run':6,41 'sensor':10,38 'sht40':34 'stock':36 'thank':90 'time':78 'use':33 've':49 'vpeak':45 'wanna':5 'work':25,89 'yes':14"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1688598501
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/post/505309"
    +editedAt: null
    +createdAt: DateTimeImmutable @1688582501 {#1850
      date: 2023-07-05 20:41:41.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#266}
  +image: null
  +parent: null
  +root: null
  +body: "I’m assuming that those "v"s are meters and not constant voltage sources. A 2.4v zener does NOT have exactly 2.4v across it. A 1.2 v supply will not be precisely 1.2v. Both will also vary with time and temperature. So, in practice there WILL be a dc component across the sensor - which will destroy it."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 0
  +score: 0
  +lastActive: DateTime @1688761531 {#4039
    date: 2023-07-07 22:25:31.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@macusking@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4028 …}
  +nested: Doctrine\ORM\PersistentCollection {#4026 …}
  +votes: Doctrine\ORM\PersistentCollection {#4024 …}
  +reports: Doctrine\ORM\PersistentCollection {#4022 …}
  +favourites: Doctrine\ORM\PersistentCollection {#3990 …}
  +notifications: Doctrine\ORM\PersistentCollection {#3994 …}
  -id: 8469
  -bodyTs: "'1.2':28,35 '2.4':16,23 'across':25,54 'also':39 'assum':3 'compon':53 'constant':12 'dc':52 'destroy':59 'exact':22 'm':2 'meter':9 'practic':47 'precis':34 'sensor':56 'sourc':14 'suppli':30 'temperatur':44 'time':42 'v':6,17,24,29,36 'vari':40 'voltag':13 'zener':18"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/661762"
  +editedAt: null
  +createdAt: DateTimeImmutable @1688586156 {#3975
    date: 2023-07-05 21:42:36.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4030
  +user: App\Entity\User {#3978 …}
  +entry: App\Entity\Entry {#2388
    +user: Proxies\__CG__\App\Entity\User {#1943 …}
    +magazine: App\Entity\Magazine {#266
      +icon: Proxies\__CG__\App\Entity\Image {#247 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#276
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#238 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#234 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#223 …}
      +entries: Doctrine\ORM\PersistentCollection {#181 …}
      +posts: Doctrine\ORM\PersistentCollection {#139 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#201 …}
      +bans: Doctrine\ORM\PersistentCollection {#118 …}
      +reports: Doctrine\ORM\PersistentCollection {#104 …}
      +badges: Doctrine\ORM\PersistentCollection {#82 …}
      +logs: Doctrine\ORM\PersistentCollection {#72 …}
      +awards: Doctrine\ORM\PersistentCollection {#61 …}
      +categories: Doctrine\ORM\PersistentCollection {#1820 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#270
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#272
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1912 …}
    +slug: "Would-this-circuit-to-use-an-HR202-humidity-sensor-actually"
    +title: "Would this circuit to use an HR202 humidity sensor actually work?"
    +url: null
    +body: """
      ![](https://discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)\n
      \n
      I wanna run a HR202 moisture sensor and an Arduino. Yes, I picked a HR202 to challenge myself to make it work. I already have some easier-to-use SHT40 in stock.\n
      \n
      This sensor can only run with AC 1.5Vpeak max. So, I’ve created this little circuit to provide AC, and I’ll only read it when the oscillator output is HIGH, so I can read it briefly at the same time with the help of Arduino’s ADC. Could this circuit work? Thank you.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 4
    +favouriteCount: 1
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1688761530 {#2410
      date: 2023-07-07 22:25:30.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1866 …}
    +votes: Doctrine\ORM\PersistentCollection {#1978 …}
    +reports: Doctrine\ORM\PersistentCollection {#1946 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1971 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2443 …}
    +badges: Doctrine\ORM\PersistentCollection {#2426 …}
    +children: []
    -id: 875
    -titleTs: "'actual':10 'circuit':3 'hr202':7 'humid':8 'sensor':9 'use':5 'work':11 'would':1"
    -bodyTs: "'/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':3 '1.5':44 'ac':43,56 'adc':85 'alreadi':27 'arduino':13,83 'briefli':74 'challeng':20 'circuit':53,88 'could':86 'creat':50 'discuss.tchncs.de':2 'discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':1 'easier':31 'easier-to-us':30 'help':81 'high':68 'hr202':8,18 'littl':52 'll':59 'make':23 'max':46 'moistur':9 'oscil':65 'output':66 'pick':16 'provid':55 'read':61,72 'run':6,41 'sensor':10,38 'sht40':34 'stock':36 'thank':90 'time':78 'use':33 've':49 'vpeak':45 'wanna':5 'work':25,89 'yes':14"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1688598501
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/post/505309"
    +editedAt: null
    +createdAt: DateTimeImmutable @1688582501 {#1850
      date: 2023-07-05 20:41:41.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#266}
  +image: null
  +parent: null
  +root: null
  +body: "I’m assuming that those "v"s are meters and not constant voltage sources. A 2.4v zener does NOT have exactly 2.4v across it. A 1.2 v supply will not be precisely 1.2v. Both will also vary with time and temperature. So, in practice there WILL be a dc component across the sensor - which will destroy it."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 0
  +score: 0
  +lastActive: DateTime @1688761531 {#4039
    date: 2023-07-07 22:25:31.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@macusking@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4028 …}
  +nested: Doctrine\ORM\PersistentCollection {#4026 …}
  +votes: Doctrine\ORM\PersistentCollection {#4024 …}
  +reports: Doctrine\ORM\PersistentCollection {#4022 …}
  +favourites: Doctrine\ORM\PersistentCollection {#3990 …}
  +notifications: Doctrine\ORM\PersistentCollection {#3994 …}
  -id: 8469
  -bodyTs: "'1.2':28,35 '2.4':16,23 'across':25,54 'also':39 'assum':3 'compon':53 'constant':12 'dc':52 'destroy':59 'exact':22 'm':2 'meter':9 'practic':47 'precis':34 'sensor':56 'sourc':14 'suppli':30 'temperatur':44 'time':42 'v':6,17,24,29,36 'vari':40 'voltag':13 'zener':18"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/661762"
  +editedAt: null
  +createdAt: DateTimeImmutable @1688586156 {#3975
    date: 2023-07-05 21:42:36.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4030
  +user: App\Entity\User {#3978 …}
  +entry: App\Entity\Entry {#2388
    +user: Proxies\__CG__\App\Entity\User {#1943 …}
    +magazine: App\Entity\Magazine {#266
      +icon: Proxies\__CG__\App\Entity\Image {#247 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#276
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#238 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#234 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#223 …}
      +entries: Doctrine\ORM\PersistentCollection {#181 …}
      +posts: Doctrine\ORM\PersistentCollection {#139 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#201 …}
      +bans: Doctrine\ORM\PersistentCollection {#118 …}
      +reports: Doctrine\ORM\PersistentCollection {#104 …}
      +badges: Doctrine\ORM\PersistentCollection {#82 …}
      +logs: Doctrine\ORM\PersistentCollection {#72 …}
      +awards: Doctrine\ORM\PersistentCollection {#61 …}
      +categories: Doctrine\ORM\PersistentCollection {#1820 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#270
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#272
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1912 …}
    +slug: "Would-this-circuit-to-use-an-HR202-humidity-sensor-actually"
    +title: "Would this circuit to use an HR202 humidity sensor actually work?"
    +url: null
    +body: """
      ![](https://discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)\n
      \n
      I wanna run a HR202 moisture sensor and an Arduino. Yes, I picked a HR202 to challenge myself to make it work. I already have some easier-to-use SHT40 in stock.\n
      \n
      This sensor can only run with AC 1.5Vpeak max. So, I’ve created this little circuit to provide AC, and I’ll only read it when the oscillator output is HIGH, so I can read it briefly at the same time with the help of Arduino’s ADC. Could this circuit work? Thank you.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 4
    +favouriteCount: 1
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1688761530 {#2410
      date: 2023-07-07 22:25:30.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1866 …}
    +votes: Doctrine\ORM\PersistentCollection {#1978 …}
    +reports: Doctrine\ORM\PersistentCollection {#1946 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1971 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2443 …}
    +badges: Doctrine\ORM\PersistentCollection {#2426 …}
    +children: []
    -id: 875
    -titleTs: "'actual':10 'circuit':3 'hr202':7 'humid':8 'sensor':9 'use':5 'work':11 'would':1"
    -bodyTs: "'/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':3 '1.5':44 'ac':43,56 'adc':85 'alreadi':27 'arduino':13,83 'briefli':74 'challeng':20 'circuit':53,88 'could':86 'creat':50 'discuss.tchncs.de':2 'discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':1 'easier':31 'easier-to-us':30 'help':81 'high':68 'hr202':8,18 'littl':52 'll':59 'make':23 'max':46 'moistur':9 'oscil':65 'output':66 'pick':16 'provid':55 'read':61,72 'run':6,41 'sensor':10,38 'sht40':34 'stock':36 'thank':90 'time':78 'use':33 've':49 'vpeak':45 'wanna':5 'work':25,89 'yes':14"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1688598501
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/post/505309"
    +editedAt: null
    +createdAt: DateTimeImmutable @1688582501 {#1850
      date: 2023-07-05 20:41:41.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#266}
  +image: null
  +parent: null
  +root: null
  +body: "I’m assuming that those "v"s are meters and not constant voltage sources. A 2.4v zener does NOT have exactly 2.4v across it. A 1.2 v supply will not be precisely 1.2v. Both will also vary with time and temperature. So, in practice there WILL be a dc component across the sensor - which will destroy it."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 0
  +score: 0
  +lastActive: DateTime @1688761531 {#4039
    date: 2023-07-07 22:25:31.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@macusking@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4028 …}
  +nested: Doctrine\ORM\PersistentCollection {#4026 …}
  +votes: Doctrine\ORM\PersistentCollection {#4024 …}
  +reports: Doctrine\ORM\PersistentCollection {#4022 …}
  +favourites: Doctrine\ORM\PersistentCollection {#3990 …}
  +notifications: Doctrine\ORM\PersistentCollection {#3994 …}
  -id: 8469
  -bodyTs: "'1.2':28,35 '2.4':16,23 'across':25,54 'also':39 'assum':3 'compon':53 'constant':12 'dc':52 'destroy':59 'exact':22 'm':2 'meter':9 'practic':47 'precis':34 'sensor':56 'sourc':14 'suppli':30 'temperatur':44 'time':42 'v':6,17,24,29,36 'vari':40 'voltag':13 'zener':18"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/661762"
  +editedAt: null
  +createdAt: DateTimeImmutable @1688586156 {#3975
    date: 2023-07-05 21:42:36.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
null
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4058
  +user: Proxies\__CG__\App\Entity\User {#1943 …}
  +entry: App\Entity\Entry {#2388
    +user: Proxies\__CG__\App\Entity\User {#1943 …}
    +magazine: App\Entity\Magazine {#266
      +icon: Proxies\__CG__\App\Entity\Image {#247 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#276
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#238 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#234 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#223 …}
      +entries: Doctrine\ORM\PersistentCollection {#181 …}
      +posts: Doctrine\ORM\PersistentCollection {#139 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#201 …}
      +bans: Doctrine\ORM\PersistentCollection {#118 …}
      +reports: Doctrine\ORM\PersistentCollection {#104 …}
      +badges: Doctrine\ORM\PersistentCollection {#82 …}
      +logs: Doctrine\ORM\PersistentCollection {#72 …}
      +awards: Doctrine\ORM\PersistentCollection {#61 …}
      +categories: Doctrine\ORM\PersistentCollection {#1820 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#270
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#272
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1912 …}
    +slug: "Would-this-circuit-to-use-an-HR202-humidity-sensor-actually"
    +title: "Would this circuit to use an HR202 humidity sensor actually work?"
    +url: null
    +body: """
      ![](https://discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)\n
      \n
      I wanna run a HR202 moisture sensor and an Arduino. Yes, I picked a HR202 to challenge myself to make it work. I already have some easier-to-use SHT40 in stock.\n
      \n
      This sensor can only run with AC 1.5Vpeak max. So, I’ve created this little circuit to provide AC, and I’ll only read it when the oscillator output is HIGH, so I can read it briefly at the same time with the help of Arduino’s ADC. Could this circuit work? Thank you.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 4
    +favouriteCount: 1
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1688761530 {#2410
      date: 2023-07-07 22:25:30.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1866 …}
    +votes: Doctrine\ORM\PersistentCollection {#1978 …}
    +reports: Doctrine\ORM\PersistentCollection {#1946 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1971 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2443 …}
    +badges: Doctrine\ORM\PersistentCollection {#2426 …}
    +children: []
    -id: 875
    -titleTs: "'actual':10 'circuit':3 'hr202':7 'humid':8 'sensor':9 'use':5 'work':11 'would':1"
    -bodyTs: "'/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':3 '1.5':44 'ac':43,56 'adc':85 'alreadi':27 'arduino':13,83 'briefli':74 'challeng':20 'circuit':53,88 'could':86 'creat':50 'discuss.tchncs.de':2 'discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':1 'easier':31 'easier-to-us':30 'help':81 'high':68 'hr202':8,18 'littl':52 'll':59 'make':23 'max':46 'moistur':9 'oscil':65 'output':66 'pick':16 'provid':55 'read':61,72 'run':6,41 'sensor':10,38 'sht40':34 'stock':36 'thank':90 'time':78 'use':33 've':49 'vpeak':45 'wanna':5 'work':25,89 'yes':14"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1688598501
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/post/505309"
    +editedAt: null
    +createdAt: DateTimeImmutable @1688582501 {#1850
      date: 2023-07-05 20:41:41.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#266}
  +image: null
  +parent: App\Entity\EntryComment {#4030
    +user: App\Entity\User {#3978 …}
    +entry: App\Entity\Entry {#2388}
    +magazine: App\Entity\Magazine {#266}
    +image: null
    +parent: null
    +root: null
    +body: "I’m assuming that those "v"s are meters and not constant voltage sources. A 2.4v zener does NOT have exactly 2.4v across it. A 1.2 v supply will not be precisely 1.2v. Both will also vary with time and temperature. So, in practice there WILL be a dc component across the sensor - which will destroy it."
    +lang: "en"
    +isAdult: false
    +favouriteCount: 0
    +score: 0
    +lastActive: DateTime @1688761531 {#4039
      date: 2023-07-07 22:25:31.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@macusking@discuss.tchncs.de"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4028 …}
    +nested: Doctrine\ORM\PersistentCollection {#4026 …}
    +votes: Doctrine\ORM\PersistentCollection {#4024 …}
    +reports: Doctrine\ORM\PersistentCollection {#4022 …}
    +favourites: Doctrine\ORM\PersistentCollection {#3990 …}
    +notifications: Doctrine\ORM\PersistentCollection {#3994 …}
    -id: 8469
    -bodyTs: "'1.2':28,35 '2.4':16,23 'across':25,54 'also':39 'assum':3 'compon':53 'constant':12 'dc':52 'destroy':59 'exact':22 'm':2 'meter':9 'practic':47 'precis':34 'sensor':56 'sourc':14 'suppli':30 'temperatur':44 'time':42 'v':6,17,24,29,36 'vari':40 'voltag':13 'zener':18"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/comment/661762"
    +editedAt: null
    +createdAt: DateTimeImmutable @1688586156 {#3975
      date: 2023-07-05 21:42:36.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4030}
  +body: "Thank you. Do you recommend me something (circuit) else? The 2.4v zener would provide about 2.4v. To keep 1.2V exactly half of the zener produced by the zener, I was considering split its voltage with 2 x 10k resistor in series and feed into an opamp in buffer configuration, so even it the 2.4 reference changes a little bit, the other side of circuit would be always zener / 2."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 0
  +score: 0
  +lastActive: DateTime @1688587916 {#4053
    date: 2023-07-05 22:11:56.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@macusking@discuss.tchncs.de"
    "@Susan_B_Good@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4061 …}
  +nested: Doctrine\ORM\PersistentCollection {#4063 …}
  +votes: Doctrine\ORM\PersistentCollection {#4065 …}
  +reports: Doctrine\ORM\PersistentCollection {#4046 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4044 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4042 …}
  -id: 8472
  -bodyTs: "'1.2':21 '10k':41 '2':39,72 '2.4':11,17,57 'alway':70 'bit':62 'buffer':51 'chang':59 'circuit':8,67 'configur':52 'consid':34 'els':9 'even':54 'exact':23 'feed':46 'half':24 'keep':20 'littl':61 'opamp':49 'produc':28 'provid':15 'recommend':5 'refer':58 'resistor':42 'seri':44 'side':65 'someth':7 'split':35 'thank':1 'v':12,18,22 'voltag':37 'would':14,68 'x':40 'zener':13,27,31,71"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/662713"
  +editedAt: DateTimeImmutable @1688588351 {#4050
    date: 2023-07-05 22:19:11.0 +02:00
  }
  +createdAt: DateTimeImmutable @1688587916 {#4048
    date: 2023-07-05 22:11:56.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4058
  +user: Proxies\__CG__\App\Entity\User {#1943 …}
  +entry: App\Entity\Entry {#2388
    +user: Proxies\__CG__\App\Entity\User {#1943 …}
    +magazine: App\Entity\Magazine {#266
      +icon: Proxies\__CG__\App\Entity\Image {#247 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#276
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#238 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#234 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#223 …}
      +entries: Doctrine\ORM\PersistentCollection {#181 …}
      +posts: Doctrine\ORM\PersistentCollection {#139 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#201 …}
      +bans: Doctrine\ORM\PersistentCollection {#118 …}
      +reports: Doctrine\ORM\PersistentCollection {#104 …}
      +badges: Doctrine\ORM\PersistentCollection {#82 …}
      +logs: Doctrine\ORM\PersistentCollection {#72 …}
      +awards: Doctrine\ORM\PersistentCollection {#61 …}
      +categories: Doctrine\ORM\PersistentCollection {#1820 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#270
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#272
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1912 …}
    +slug: "Would-this-circuit-to-use-an-HR202-humidity-sensor-actually"
    +title: "Would this circuit to use an HR202 humidity sensor actually work?"
    +url: null
    +body: """
      ![](https://discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)\n
      \n
      I wanna run a HR202 moisture sensor and an Arduino. Yes, I picked a HR202 to challenge myself to make it work. I already have some easier-to-use SHT40 in stock.\n
      \n
      This sensor can only run with AC 1.5Vpeak max. So, I’ve created this little circuit to provide AC, and I’ll only read it when the oscillator output is HIGH, so I can read it briefly at the same time with the help of Arduino’s ADC. Could this circuit work? Thank you.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 4
    +favouriteCount: 1
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1688761530 {#2410
      date: 2023-07-07 22:25:30.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1866 …}
    +votes: Doctrine\ORM\PersistentCollection {#1978 …}
    +reports: Doctrine\ORM\PersistentCollection {#1946 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1971 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2443 …}
    +badges: Doctrine\ORM\PersistentCollection {#2426 …}
    +children: []
    -id: 875
    -titleTs: "'actual':10 'circuit':3 'hr202':7 'humid':8 'sensor':9 'use':5 'work':11 'would':1"
    -bodyTs: "'/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':3 '1.5':44 'ac':43,56 'adc':85 'alreadi':27 'arduino':13,83 'briefli':74 'challeng':20 'circuit':53,88 'could':86 'creat':50 'discuss.tchncs.de':2 'discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':1 'easier':31 'easier-to-us':30 'help':81 'high':68 'hr202':8,18 'littl':52 'll':59 'make':23 'max':46 'moistur':9 'oscil':65 'output':66 'pick':16 'provid':55 'read':61,72 'run':6,41 'sensor':10,38 'sht40':34 'stock':36 'thank':90 'time':78 'use':33 've':49 'vpeak':45 'wanna':5 'work':25,89 'yes':14"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1688598501
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/post/505309"
    +editedAt: null
    +createdAt: DateTimeImmutable @1688582501 {#1850
      date: 2023-07-05 20:41:41.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#266}
  +image: null
  +parent: App\Entity\EntryComment {#4030
    +user: App\Entity\User {#3978 …}
    +entry: App\Entity\Entry {#2388}
    +magazine: App\Entity\Magazine {#266}
    +image: null
    +parent: null
    +root: null
    +body: "I’m assuming that those "v"s are meters and not constant voltage sources. A 2.4v zener does NOT have exactly 2.4v across it. A 1.2 v supply will not be precisely 1.2v. Both will also vary with time and temperature. So, in practice there WILL be a dc component across the sensor - which will destroy it."
    +lang: "en"
    +isAdult: false
    +favouriteCount: 0
    +score: 0
    +lastActive: DateTime @1688761531 {#4039
      date: 2023-07-07 22:25:31.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@macusking@discuss.tchncs.de"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4028 …}
    +nested: Doctrine\ORM\PersistentCollection {#4026 …}
    +votes: Doctrine\ORM\PersistentCollection {#4024 …}
    +reports: Doctrine\ORM\PersistentCollection {#4022 …}
    +favourites: Doctrine\ORM\PersistentCollection {#3990 …}
    +notifications: Doctrine\ORM\PersistentCollection {#3994 …}
    -id: 8469
    -bodyTs: "'1.2':28,35 '2.4':16,23 'across':25,54 'also':39 'assum':3 'compon':53 'constant':12 'dc':52 'destroy':59 'exact':22 'm':2 'meter':9 'practic':47 'precis':34 'sensor':56 'sourc':14 'suppli':30 'temperatur':44 'time':42 'v':6,17,24,29,36 'vari':40 'voltag':13 'zener':18"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/comment/661762"
    +editedAt: null
    +createdAt: DateTimeImmutable @1688586156 {#3975
      date: 2023-07-05 21:42:36.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4030}
  +body: "Thank you. Do you recommend me something (circuit) else? The 2.4v zener would provide about 2.4v. To keep 1.2V exactly half of the zener produced by the zener, I was considering split its voltage with 2 x 10k resistor in series and feed into an opamp in buffer configuration, so even it the 2.4 reference changes a little bit, the other side of circuit would be always zener / 2."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 0
  +score: 0
  +lastActive: DateTime @1688587916 {#4053
    date: 2023-07-05 22:11:56.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@macusking@discuss.tchncs.de"
    "@Susan_B_Good@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4061 …}
  +nested: Doctrine\ORM\PersistentCollection {#4063 …}
  +votes: Doctrine\ORM\PersistentCollection {#4065 …}
  +reports: Doctrine\ORM\PersistentCollection {#4046 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4044 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4042 …}
  -id: 8472
  -bodyTs: "'1.2':21 '10k':41 '2':39,72 '2.4':11,17,57 'alway':70 'bit':62 'buffer':51 'chang':59 'circuit':8,67 'configur':52 'consid':34 'els':9 'even':54 'exact':23 'feed':46 'half':24 'keep':20 'littl':61 'opamp':49 'produc':28 'provid':15 'recommend':5 'refer':58 'resistor':42 'seri':44 'side':65 'someth':7 'split':35 'thank':1 'v':12,18,22 'voltag':37 'would':14,68 'x':40 'zener':13,27,31,71"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/662713"
  +editedAt: DateTimeImmutable @1688588351 {#4050
    date: 2023-07-05 22:19:11.0 +02:00
  }
  +createdAt: DateTimeImmutable @1688587916 {#4048
    date: 2023-07-05 22:11:56.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4058
  +user: Proxies\__CG__\App\Entity\User {#1943 …}
  +entry: App\Entity\Entry {#2388
    +user: Proxies\__CG__\App\Entity\User {#1943 …}
    +magazine: App\Entity\Magazine {#266
      +icon: Proxies\__CG__\App\Entity\Image {#247 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#276
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#238 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#234 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#223 …}
      +entries: Doctrine\ORM\PersistentCollection {#181 …}
      +posts: Doctrine\ORM\PersistentCollection {#139 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#201 …}
      +bans: Doctrine\ORM\PersistentCollection {#118 …}
      +reports: Doctrine\ORM\PersistentCollection {#104 …}
      +badges: Doctrine\ORM\PersistentCollection {#82 …}
      +logs: Doctrine\ORM\PersistentCollection {#72 …}
      +awards: Doctrine\ORM\PersistentCollection {#61 …}
      +categories: Doctrine\ORM\PersistentCollection {#1820 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#270
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#272
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1912 …}
    +slug: "Would-this-circuit-to-use-an-HR202-humidity-sensor-actually"
    +title: "Would this circuit to use an HR202 humidity sensor actually work?"
    +url: null
    +body: """
      ![](https://discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)\n
      \n
      I wanna run a HR202 moisture sensor and an Arduino. Yes, I picked a HR202 to challenge myself to make it work. I already have some easier-to-use SHT40 in stock.\n
      \n
      This sensor can only run with AC 1.5Vpeak max. So, I’ve created this little circuit to provide AC, and I’ll only read it when the oscillator output is HIGH, so I can read it briefly at the same time with the help of Arduino’s ADC. Could this circuit work? Thank you.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 4
    +favouriteCount: 1
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1688761530 {#2410
      date: 2023-07-07 22:25:30.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1866 …}
    +votes: Doctrine\ORM\PersistentCollection {#1978 …}
    +reports: Doctrine\ORM\PersistentCollection {#1946 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1971 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2443 …}
    +badges: Doctrine\ORM\PersistentCollection {#2426 …}
    +children: []
    -id: 875
    -titleTs: "'actual':10 'circuit':3 'hr202':7 'humid':8 'sensor':9 'use':5 'work':11 'would':1"
    -bodyTs: "'/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':3 '1.5':44 'ac':43,56 'adc':85 'alreadi':27 'arduino':13,83 'briefli':74 'challeng':20 'circuit':53,88 'could':86 'creat':50 'discuss.tchncs.de':2 'discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':1 'easier':31 'easier-to-us':30 'help':81 'high':68 'hr202':8,18 'littl':52 'll':59 'make':23 'max':46 'moistur':9 'oscil':65 'output':66 'pick':16 'provid':55 'read':61,72 'run':6,41 'sensor':10,38 'sht40':34 'stock':36 'thank':90 'time':78 'use':33 've':49 'vpeak':45 'wanna':5 'work':25,89 'yes':14"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1688598501
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/post/505309"
    +editedAt: null
    +createdAt: DateTimeImmutable @1688582501 {#1850
      date: 2023-07-05 20:41:41.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#266}
  +image: null
  +parent: App\Entity\EntryComment {#4030
    +user: App\Entity\User {#3978 …}
    +entry: App\Entity\Entry {#2388}
    +magazine: App\Entity\Magazine {#266}
    +image: null
    +parent: null
    +root: null
    +body: "I’m assuming that those "v"s are meters and not constant voltage sources. A 2.4v zener does NOT have exactly 2.4v across it. A 1.2 v supply will not be precisely 1.2v. Both will also vary with time and temperature. So, in practice there WILL be a dc component across the sensor - which will destroy it."
    +lang: "en"
    +isAdult: false
    +favouriteCount: 0
    +score: 0
    +lastActive: DateTime @1688761531 {#4039
      date: 2023-07-07 22:25:31.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@macusking@discuss.tchncs.de"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4028 …}
    +nested: Doctrine\ORM\PersistentCollection {#4026 …}
    +votes: Doctrine\ORM\PersistentCollection {#4024 …}
    +reports: Doctrine\ORM\PersistentCollection {#4022 …}
    +favourites: Doctrine\ORM\PersistentCollection {#3990 …}
    +notifications: Doctrine\ORM\PersistentCollection {#3994 …}
    -id: 8469
    -bodyTs: "'1.2':28,35 '2.4':16,23 'across':25,54 'also':39 'assum':3 'compon':53 'constant':12 'dc':52 'destroy':59 'exact':22 'm':2 'meter':9 'practic':47 'precis':34 'sensor':56 'sourc':14 'suppli':30 'temperatur':44 'time':42 'v':6,17,24,29,36 'vari':40 'voltag':13 'zener':18"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/comment/661762"
    +editedAt: null
    +createdAt: DateTimeImmutable @1688586156 {#3975
      date: 2023-07-05 21:42:36.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4030}
  +body: "Thank you. Do you recommend me something (circuit) else? The 2.4v zener would provide about 2.4v. To keep 1.2V exactly half of the zener produced by the zener, I was considering split its voltage with 2 x 10k resistor in series and feed into an opamp in buffer configuration, so even it the 2.4 reference changes a little bit, the other side of circuit would be always zener / 2."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 0
  +score: 0
  +lastActive: DateTime @1688587916 {#4053
    date: 2023-07-05 22:11:56.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@macusking@discuss.tchncs.de"
    "@Susan_B_Good@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4061 …}
  +nested: Doctrine\ORM\PersistentCollection {#4063 …}
  +votes: Doctrine\ORM\PersistentCollection {#4065 …}
  +reports: Doctrine\ORM\PersistentCollection {#4046 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4044 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4042 …}
  -id: 8472
  -bodyTs: "'1.2':21 '10k':41 '2':39,72 '2.4':11,17,57 'alway':70 'bit':62 'buffer':51 'chang':59 'circuit':8,67 'configur':52 'consid':34 'els':9 'even':54 'exact':23 'feed':46 'half':24 'keep':20 'littl':61 'opamp':49 'produc':28 'provid':15 'recommend':5 'refer':58 'resistor':42 'seri':44 'side':65 'someth':7 'split':35 'thank':1 'v':12,18,22 'voltag':37 'would':14,68 'x':40 'zener':13,27,31,71"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/662713"
  +editedAt: DateTimeImmutable @1688588351 {#4050
    date: 2023-07-05 22:19:11.0 +02:00
  }
  +createdAt: DateTimeImmutable @1688587916 {#4048
    date: 2023-07-05 22:11:56.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
null
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4113
  +user: App\Entity\User {#3978 …}
  +entry: App\Entity\Entry {#2388
    +user: Proxies\__CG__\App\Entity\User {#1943 …}
    +magazine: App\Entity\Magazine {#266
      +icon: Proxies\__CG__\App\Entity\Image {#247 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#276
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#238 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#234 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#223 …}
      +entries: Doctrine\ORM\PersistentCollection {#181 …}
      +posts: Doctrine\ORM\PersistentCollection {#139 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#201 …}
      +bans: Doctrine\ORM\PersistentCollection {#118 …}
      +reports: Doctrine\ORM\PersistentCollection {#104 …}
      +badges: Doctrine\ORM\PersistentCollection {#82 …}
      +logs: Doctrine\ORM\PersistentCollection {#72 …}
      +awards: Doctrine\ORM\PersistentCollection {#61 …}
      +categories: Doctrine\ORM\PersistentCollection {#1820 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#270
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#272
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1912 …}
    +slug: "Would-this-circuit-to-use-an-HR202-humidity-sensor-actually"
    +title: "Would this circuit to use an HR202 humidity sensor actually work?"
    +url: null
    +body: """
      ![](https://discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)\n
      \n
      I wanna run a HR202 moisture sensor and an Arduino. Yes, I picked a HR202 to challenge myself to make it work. I already have some easier-to-use SHT40 in stock.\n
      \n
      This sensor can only run with AC 1.5Vpeak max. So, I’ve created this little circuit to provide AC, and I’ll only read it when the oscillator output is HIGH, so I can read it briefly at the same time with the help of Arduino’s ADC. Could this circuit work? Thank you.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 4
    +favouriteCount: 1
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1688761530 {#2410
      date: 2023-07-07 22:25:30.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1866 …}
    +votes: Doctrine\ORM\PersistentCollection {#1978 …}
    +reports: Doctrine\ORM\PersistentCollection {#1946 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1971 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2443 …}
    +badges: Doctrine\ORM\PersistentCollection {#2426 …}
    +children: []
    -id: 875
    -titleTs: "'actual':10 'circuit':3 'hr202':7 'humid':8 'sensor':9 'use':5 'work':11 'would':1"
    -bodyTs: "'/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':3 '1.5':44 'ac':43,56 'adc':85 'alreadi':27 'arduino':13,83 'briefli':74 'challeng':20 'circuit':53,88 'could':86 'creat':50 'discuss.tchncs.de':2 'discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':1 'easier':31 'easier-to-us':30 'help':81 'high':68 'hr202':8,18 'littl':52 'll':59 'make':23 'max':46 'moistur':9 'oscil':65 'output':66 'pick':16 'provid':55 'read':61,72 'run':6,41 'sensor':10,38 'sht40':34 'stock':36 'thank':90 'time':78 'use':33 've':49 'vpeak':45 'wanna':5 'work':25,89 'yes':14"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1688598501
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/post/505309"
    +editedAt: null
    +createdAt: DateTimeImmutable @1688582501 {#1850
      date: 2023-07-05 20:41:41.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#266}
  +image: null
  +parent: App\Entity\EntryComment {#4058
    +user: Proxies\__CG__\App\Entity\User {#1943 …}
    +entry: App\Entity\Entry {#2388}
    +magazine: App\Entity\Magazine {#266}
    +image: null
    +parent: App\Entity\EntryComment {#4030
      +user: App\Entity\User {#3978 …}
      +entry: App\Entity\Entry {#2388}
      +magazine: App\Entity\Magazine {#266}
      +image: null
      +parent: null
      +root: null
      +body: "I’m assuming that those "v"s are meters and not constant voltage sources. A 2.4v zener does NOT have exactly 2.4v across it. A 1.2 v supply will not be precisely 1.2v. Both will also vary with time and temperature. So, in practice there WILL be a dc component across the sensor - which will destroy it."
      +lang: "en"
      +isAdult: false
      +favouriteCount: 0
      +score: 0
      +lastActive: DateTime @1688761531 {#4039
        date: 2023-07-07 22:25:31.0 +02:00
      }
      +ip: null
      +tags: null
      +mentions: [
        "@macusking@discuss.tchncs.de"
      ]
      +children: Doctrine\ORM\PersistentCollection {#4028 …}
      +nested: Doctrine\ORM\PersistentCollection {#4026 …}
      +votes: Doctrine\ORM\PersistentCollection {#4024 …}
      +reports: Doctrine\ORM\PersistentCollection {#4022 …}
      +favourites: Doctrine\ORM\PersistentCollection {#3990 …}
      +notifications: Doctrine\ORM\PersistentCollection {#3994 …}
      -id: 8469
      -bodyTs: "'1.2':28,35 '2.4':16,23 'across':25,54 'also':39 'assum':3 'compon':53 'constant':12 'dc':52 'destroy':59 'exact':22 'm':2 'meter':9 'practic':47 'precis':34 'sensor':56 'sourc':14 'suppli':30 'temperatur':44 'time':42 'v':6,17,24,29,36 'vari':40 'voltag':13 'zener':18"
      +ranking: 0
      +commentCount: 0
      +upVotes: 0
      +downVotes: 0
      +visibility: "visible             "
      +apId: "https://discuss.tchncs.de/comment/661762"
      +editedAt: null
      +createdAt: DateTimeImmutable @1688586156 {#3975
        date: 2023-07-05 21:42:36.0 +02:00
      }
    }
    +root: App\Entity\EntryComment {#4030}
    +body: "Thank you. Do you recommend me something (circuit) else? The 2.4v zener would provide about 2.4v. To keep 1.2V exactly half of the zener produced by the zener, I was considering split its voltage with 2 x 10k resistor in series and feed into an opamp in buffer configuration, so even it the 2.4 reference changes a little bit, the other side of circuit would be always zener / 2."
    +lang: "en"
    +isAdult: false
    +favouriteCount: 0
    +score: 0
    +lastActive: DateTime @1688587916 {#4053
      date: 2023-07-05 22:11:56.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@macusking@discuss.tchncs.de"
      "@Susan_B_Good@discuss.tchncs.de"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4061 …}
    +nested: Doctrine\ORM\PersistentCollection {#4063 …}
    +votes: Doctrine\ORM\PersistentCollection {#4065 …}
    +reports: Doctrine\ORM\PersistentCollection {#4046 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4044 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4042 …}
    -id: 8472
    -bodyTs: "'1.2':21 '10k':41 '2':39,72 '2.4':11,17,57 'alway':70 'bit':62 'buffer':51 'chang':59 'circuit':8,67 'configur':52 'consid':34 'els':9 'even':54 'exact':23 'feed':46 'half':24 'keep':20 'littl':61 'opamp':49 'produc':28 'provid':15 'recommend':5 'refer':58 'resistor':42 'seri':44 'side':65 'someth':7 'split':35 'thank':1 'v':12,18,22 'voltag':37 'would':14,68 'x':40 'zener':13,27,31,71"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/comment/662713"
    +editedAt: DateTimeImmutable @1688588351 {#4050
      date: 2023-07-05 22:19:11.0 +02:00
    }
    +createdAt: DateTimeImmutable @1688587916 {#4048
      date: 2023-07-05 22:11:56.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4030}
  +body: "How I would do it is to use two digital IO pins on the processor to generate the reference square wave. Put the sensor plus a series precision resistor between them and just pull one IO pin high as the other is pulled low and then swap them. That presumes that IO pins can both source and sink IO current. Then take the junction between the two to an Analogue in pin. You get two measurements each cycle. Use a lookup table of values and interpolate between them. If you wanted more precision - add more series resistors of different values covering the range of humidity that you want to sense, going to different IO pins. So you can choose the IO pin pair that brings the centre point between sensor and resistor closest to the mid-voltage point. It’s effectively a balanced half bridge arrangement - using the precision of the resistors to determine overall measurement precision. OK it ties up several IO pins - but microcontrollers are so cheap, I’d probably just dedicate one to this sensor and that’s all that it would do."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1688622526 {#4108
    date: 2023-07-06 07:48:46.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@macusking@discuss.tchncs.de"
    "@Susan_B_Good@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4105 …}
  +nested: Doctrine\ORM\PersistentCollection {#4102 …}
  +votes: Doctrine\ORM\PersistentCollection {#4099 …}
  +reports: Doctrine\ORM\PersistentCollection {#4114 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4116 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4118 …}
  -id: 8568
  -bodyTs: "'add':94 'analogu':70 'arrang':147 'balanc':144 'bridg':146 'bring':125 'centr':127 'cheap':170 'choos':119 'closest':133 'cover':101 'current':60 'cycl':78 'd':172 'dedic':175 'determin':155 'differ':99,113 'digit':10 'effect':142 'generat':17 'get':74 'go':111 'half':145 'high':38 'humid':105 'interpol':86 'io':11,36,52,59,114,121,164 'junction':64 'lookup':81 'low':44 'measur':76,157 'microcontrol':167 'mid':137 'mid-voltag':136 'ok':159 'one':35,176 'overal':156 'pair':123 'pin':12,37,53,72,115,122,165 'plus':25 'point':128,139 'precis':28,93,150,158 'presum':50 'probabl':173 'processor':15 'pull':34,43 'put':22 'rang':103 'refer':19 'resistor':29,97,132,153 'sens':110 'sensor':24,130,179 'seri':27,96 'sever':163 'sink':58 'sourc':56 'squar':20 'swap':47 'tabl':82 'take':62 'tie':161 'two':9,67,75 'use':8,79,148 'valu':84,100 'voltag':138 'want':91,108 'wave':21 'would':3,186"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/678173"
  +editedAt: null
  +createdAt: DateTimeImmutable @1688622526 {#4111
    date: 2023-07-06 07:48:46.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4113
  +user: App\Entity\User {#3978 …}
  +entry: App\Entity\Entry {#2388
    +user: Proxies\__CG__\App\Entity\User {#1943 …}
    +magazine: App\Entity\Magazine {#266
      +icon: Proxies\__CG__\App\Entity\Image {#247 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#276
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#238 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#234 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#223 …}
      +entries: Doctrine\ORM\PersistentCollection {#181 …}
      +posts: Doctrine\ORM\PersistentCollection {#139 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#201 …}
      +bans: Doctrine\ORM\PersistentCollection {#118 …}
      +reports: Doctrine\ORM\PersistentCollection {#104 …}
      +badges: Doctrine\ORM\PersistentCollection {#82 …}
      +logs: Doctrine\ORM\PersistentCollection {#72 …}
      +awards: Doctrine\ORM\PersistentCollection {#61 …}
      +categories: Doctrine\ORM\PersistentCollection {#1820 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#270
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#272
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1912 …}
    +slug: "Would-this-circuit-to-use-an-HR202-humidity-sensor-actually"
    +title: "Would this circuit to use an HR202 humidity sensor actually work?"
    +url: null
    +body: """
      ![](https://discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)\n
      \n
      I wanna run a HR202 moisture sensor and an Arduino. Yes, I picked a HR202 to challenge myself to make it work. I already have some easier-to-use SHT40 in stock.\n
      \n
      This sensor can only run with AC 1.5Vpeak max. So, I’ve created this little circuit to provide AC, and I’ll only read it when the oscillator output is HIGH, so I can read it briefly at the same time with the help of Arduino’s ADC. Could this circuit work? Thank you.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 4
    +favouriteCount: 1
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1688761530 {#2410
      date: 2023-07-07 22:25:30.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1866 …}
    +votes: Doctrine\ORM\PersistentCollection {#1978 …}
    +reports: Doctrine\ORM\PersistentCollection {#1946 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1971 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2443 …}
    +badges: Doctrine\ORM\PersistentCollection {#2426 …}
    +children: []
    -id: 875
    -titleTs: "'actual':10 'circuit':3 'hr202':7 'humid':8 'sensor':9 'use':5 'work':11 'would':1"
    -bodyTs: "'/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':3 '1.5':44 'ac':43,56 'adc':85 'alreadi':27 'arduino':13,83 'briefli':74 'challeng':20 'circuit':53,88 'could':86 'creat':50 'discuss.tchncs.de':2 'discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':1 'easier':31 'easier-to-us':30 'help':81 'high':68 'hr202':8,18 'littl':52 'll':59 'make':23 'max':46 'moistur':9 'oscil':65 'output':66 'pick':16 'provid':55 'read':61,72 'run':6,41 'sensor':10,38 'sht40':34 'stock':36 'thank':90 'time':78 'use':33 've':49 'vpeak':45 'wanna':5 'work':25,89 'yes':14"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1688598501
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/post/505309"
    +editedAt: null
    +createdAt: DateTimeImmutable @1688582501 {#1850
      date: 2023-07-05 20:41:41.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#266}
  +image: null
  +parent: App\Entity\EntryComment {#4058
    +user: Proxies\__CG__\App\Entity\User {#1943 …}
    +entry: App\Entity\Entry {#2388}
    +magazine: App\Entity\Magazine {#266}
    +image: null
    +parent: App\Entity\EntryComment {#4030
      +user: App\Entity\User {#3978 …}
      +entry: App\Entity\Entry {#2388}
      +magazine: App\Entity\Magazine {#266}
      +image: null
      +parent: null
      +root: null
      +body: "I’m assuming that those "v"s are meters and not constant voltage sources. A 2.4v zener does NOT have exactly 2.4v across it. A 1.2 v supply will not be precisely 1.2v. Both will also vary with time and temperature. So, in practice there WILL be a dc component across the sensor - which will destroy it."
      +lang: "en"
      +isAdult: false
      +favouriteCount: 0
      +score: 0
      +lastActive: DateTime @1688761531 {#4039
        date: 2023-07-07 22:25:31.0 +02:00
      }
      +ip: null
      +tags: null
      +mentions: [
        "@macusking@discuss.tchncs.de"
      ]
      +children: Doctrine\ORM\PersistentCollection {#4028 …}
      +nested: Doctrine\ORM\PersistentCollection {#4026 …}
      +votes: Doctrine\ORM\PersistentCollection {#4024 …}
      +reports: Doctrine\ORM\PersistentCollection {#4022 …}
      +favourites: Doctrine\ORM\PersistentCollection {#3990 …}
      +notifications: Doctrine\ORM\PersistentCollection {#3994 …}
      -id: 8469
      -bodyTs: "'1.2':28,35 '2.4':16,23 'across':25,54 'also':39 'assum':3 'compon':53 'constant':12 'dc':52 'destroy':59 'exact':22 'm':2 'meter':9 'practic':47 'precis':34 'sensor':56 'sourc':14 'suppli':30 'temperatur':44 'time':42 'v':6,17,24,29,36 'vari':40 'voltag':13 'zener':18"
      +ranking: 0
      +commentCount: 0
      +upVotes: 0
      +downVotes: 0
      +visibility: "visible             "
      +apId: "https://discuss.tchncs.de/comment/661762"
      +editedAt: null
      +createdAt: DateTimeImmutable @1688586156 {#3975
        date: 2023-07-05 21:42:36.0 +02:00
      }
    }
    +root: App\Entity\EntryComment {#4030}
    +body: "Thank you. Do you recommend me something (circuit) else? The 2.4v zener would provide about 2.4v. To keep 1.2V exactly half of the zener produced by the zener, I was considering split its voltage with 2 x 10k resistor in series and feed into an opamp in buffer configuration, so even it the 2.4 reference changes a little bit, the other side of circuit would be always zener / 2."
    +lang: "en"
    +isAdult: false
    +favouriteCount: 0
    +score: 0
    +lastActive: DateTime @1688587916 {#4053
      date: 2023-07-05 22:11:56.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@macusking@discuss.tchncs.de"
      "@Susan_B_Good@discuss.tchncs.de"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4061 …}
    +nested: Doctrine\ORM\PersistentCollection {#4063 …}
    +votes: Doctrine\ORM\PersistentCollection {#4065 …}
    +reports: Doctrine\ORM\PersistentCollection {#4046 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4044 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4042 …}
    -id: 8472
    -bodyTs: "'1.2':21 '10k':41 '2':39,72 '2.4':11,17,57 'alway':70 'bit':62 'buffer':51 'chang':59 'circuit':8,67 'configur':52 'consid':34 'els':9 'even':54 'exact':23 'feed':46 'half':24 'keep':20 'littl':61 'opamp':49 'produc':28 'provid':15 'recommend':5 'refer':58 'resistor':42 'seri':44 'side':65 'someth':7 'split':35 'thank':1 'v':12,18,22 'voltag':37 'would':14,68 'x':40 'zener':13,27,31,71"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/comment/662713"
    +editedAt: DateTimeImmutable @1688588351 {#4050
      date: 2023-07-05 22:19:11.0 +02:00
    }
    +createdAt: DateTimeImmutable @1688587916 {#4048
      date: 2023-07-05 22:11:56.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4030}
  +body: "How I would do it is to use two digital IO pins on the processor to generate the reference square wave. Put the sensor plus a series precision resistor between them and just pull one IO pin high as the other is pulled low and then swap them. That presumes that IO pins can both source and sink IO current. Then take the junction between the two to an Analogue in pin. You get two measurements each cycle. Use a lookup table of values and interpolate between them. If you wanted more precision - add more series resistors of different values covering the range of humidity that you want to sense, going to different IO pins. So you can choose the IO pin pair that brings the centre point between sensor and resistor closest to the mid-voltage point. It’s effectively a balanced half bridge arrangement - using the precision of the resistors to determine overall measurement precision. OK it ties up several IO pins - but microcontrollers are so cheap, I’d probably just dedicate one to this sensor and that’s all that it would do."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1688622526 {#4108
    date: 2023-07-06 07:48:46.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@macusking@discuss.tchncs.de"
    "@Susan_B_Good@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4105 …}
  +nested: Doctrine\ORM\PersistentCollection {#4102 …}
  +votes: Doctrine\ORM\PersistentCollection {#4099 …}
  +reports: Doctrine\ORM\PersistentCollection {#4114 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4116 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4118 …}
  -id: 8568
  -bodyTs: "'add':94 'analogu':70 'arrang':147 'balanc':144 'bridg':146 'bring':125 'centr':127 'cheap':170 'choos':119 'closest':133 'cover':101 'current':60 'cycl':78 'd':172 'dedic':175 'determin':155 'differ':99,113 'digit':10 'effect':142 'generat':17 'get':74 'go':111 'half':145 'high':38 'humid':105 'interpol':86 'io':11,36,52,59,114,121,164 'junction':64 'lookup':81 'low':44 'measur':76,157 'microcontrol':167 'mid':137 'mid-voltag':136 'ok':159 'one':35,176 'overal':156 'pair':123 'pin':12,37,53,72,115,122,165 'plus':25 'point':128,139 'precis':28,93,150,158 'presum':50 'probabl':173 'processor':15 'pull':34,43 'put':22 'rang':103 'refer':19 'resistor':29,97,132,153 'sens':110 'sensor':24,130,179 'seri':27,96 'sever':163 'sink':58 'sourc':56 'squar':20 'swap':47 'tabl':82 'take':62 'tie':161 'two':9,67,75 'use':8,79,148 'valu':84,100 'voltag':138 'want':91,108 'wave':21 'would':3,186"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/678173"
  +editedAt: null
  +createdAt: DateTimeImmutable @1688622526 {#4111
    date: 2023-07-06 07:48:46.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4113
  +user: App\Entity\User {#3978 …}
  +entry: App\Entity\Entry {#2388
    +user: Proxies\__CG__\App\Entity\User {#1943 …}
    +magazine: App\Entity\Magazine {#266
      +icon: Proxies\__CG__\App\Entity\Image {#247 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#276
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#238 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#234 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#223 …}
      +entries: Doctrine\ORM\PersistentCollection {#181 …}
      +posts: Doctrine\ORM\PersistentCollection {#139 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#201 …}
      +bans: Doctrine\ORM\PersistentCollection {#118 …}
      +reports: Doctrine\ORM\PersistentCollection {#104 …}
      +badges: Doctrine\ORM\PersistentCollection {#82 …}
      +logs: Doctrine\ORM\PersistentCollection {#72 …}
      +awards: Doctrine\ORM\PersistentCollection {#61 …}
      +categories: Doctrine\ORM\PersistentCollection {#1820 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#270
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#272
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1912 …}
    +slug: "Would-this-circuit-to-use-an-HR202-humidity-sensor-actually"
    +title: "Would this circuit to use an HR202 humidity sensor actually work?"
    +url: null
    +body: """
      ![](https://discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)\n
      \n
      I wanna run a HR202 moisture sensor and an Arduino. Yes, I picked a HR202 to challenge myself to make it work. I already have some easier-to-use SHT40 in stock.\n
      \n
      This sensor can only run with AC 1.5Vpeak max. So, I’ve created this little circuit to provide AC, and I’ll only read it when the oscillator output is HIGH, so I can read it briefly at the same time with the help of Arduino’s ADC. Could this circuit work? Thank you.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 4
    +favouriteCount: 1
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1688761530 {#2410
      date: 2023-07-07 22:25:30.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1866 …}
    +votes: Doctrine\ORM\PersistentCollection {#1978 …}
    +reports: Doctrine\ORM\PersistentCollection {#1946 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1971 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2443 …}
    +badges: Doctrine\ORM\PersistentCollection {#2426 …}
    +children: []
    -id: 875
    -titleTs: "'actual':10 'circuit':3 'hr202':7 'humid':8 'sensor':9 'use':5 'work':11 'would':1"
    -bodyTs: "'/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':3 '1.5':44 'ac':43,56 'adc':85 'alreadi':27 'arduino':13,83 'briefli':74 'challeng':20 'circuit':53,88 'could':86 'creat':50 'discuss.tchncs.de':2 'discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':1 'easier':31 'easier-to-us':30 'help':81 'high':68 'hr202':8,18 'littl':52 'll':59 'make':23 'max':46 'moistur':9 'oscil':65 'output':66 'pick':16 'provid':55 'read':61,72 'run':6,41 'sensor':10,38 'sht40':34 'stock':36 'thank':90 'time':78 'use':33 've':49 'vpeak':45 'wanna':5 'work':25,89 'yes':14"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1688598501
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/post/505309"
    +editedAt: null
    +createdAt: DateTimeImmutable @1688582501 {#1850
      date: 2023-07-05 20:41:41.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#266}
  +image: null
  +parent: App\Entity\EntryComment {#4058
    +user: Proxies\__CG__\App\Entity\User {#1943 …}
    +entry: App\Entity\Entry {#2388}
    +magazine: App\Entity\Magazine {#266}
    +image: null
    +parent: App\Entity\EntryComment {#4030
      +user: App\Entity\User {#3978 …}
      +entry: App\Entity\Entry {#2388}
      +magazine: App\Entity\Magazine {#266}
      +image: null
      +parent: null
      +root: null
      +body: "I’m assuming that those "v"s are meters and not constant voltage sources. A 2.4v zener does NOT have exactly 2.4v across it. A 1.2 v supply will not be precisely 1.2v. Both will also vary with time and temperature. So, in practice there WILL be a dc component across the sensor - which will destroy it."
      +lang: "en"
      +isAdult: false
      +favouriteCount: 0
      +score: 0
      +lastActive: DateTime @1688761531 {#4039
        date: 2023-07-07 22:25:31.0 +02:00
      }
      +ip: null
      +tags: null
      +mentions: [
        "@macusking@discuss.tchncs.de"
      ]
      +children: Doctrine\ORM\PersistentCollection {#4028 …}
      +nested: Doctrine\ORM\PersistentCollection {#4026 …}
      +votes: Doctrine\ORM\PersistentCollection {#4024 …}
      +reports: Doctrine\ORM\PersistentCollection {#4022 …}
      +favourites: Doctrine\ORM\PersistentCollection {#3990 …}
      +notifications: Doctrine\ORM\PersistentCollection {#3994 …}
      -id: 8469
      -bodyTs: "'1.2':28,35 '2.4':16,23 'across':25,54 'also':39 'assum':3 'compon':53 'constant':12 'dc':52 'destroy':59 'exact':22 'm':2 'meter':9 'practic':47 'precis':34 'sensor':56 'sourc':14 'suppli':30 'temperatur':44 'time':42 'v':6,17,24,29,36 'vari':40 'voltag':13 'zener':18"
      +ranking: 0
      +commentCount: 0
      +upVotes: 0
      +downVotes: 0
      +visibility: "visible             "
      +apId: "https://discuss.tchncs.de/comment/661762"
      +editedAt: null
      +createdAt: DateTimeImmutable @1688586156 {#3975
        date: 2023-07-05 21:42:36.0 +02:00
      }
    }
    +root: App\Entity\EntryComment {#4030}
    +body: "Thank you. Do you recommend me something (circuit) else? The 2.4v zener would provide about 2.4v. To keep 1.2V exactly half of the zener produced by the zener, I was considering split its voltage with 2 x 10k resistor in series and feed into an opamp in buffer configuration, so even it the 2.4 reference changes a little bit, the other side of circuit would be always zener / 2."
    +lang: "en"
    +isAdult: false
    +favouriteCount: 0
    +score: 0
    +lastActive: DateTime @1688587916 {#4053
      date: 2023-07-05 22:11:56.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@macusking@discuss.tchncs.de"
      "@Susan_B_Good@discuss.tchncs.de"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4061 …}
    +nested: Doctrine\ORM\PersistentCollection {#4063 …}
    +votes: Doctrine\ORM\PersistentCollection {#4065 …}
    +reports: Doctrine\ORM\PersistentCollection {#4046 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4044 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4042 …}
    -id: 8472
    -bodyTs: "'1.2':21 '10k':41 '2':39,72 '2.4':11,17,57 'alway':70 'bit':62 'buffer':51 'chang':59 'circuit':8,67 'configur':52 'consid':34 'els':9 'even':54 'exact':23 'feed':46 'half':24 'keep':20 'littl':61 'opamp':49 'produc':28 'provid':15 'recommend':5 'refer':58 'resistor':42 'seri':44 'side':65 'someth':7 'split':35 'thank':1 'v':12,18,22 'voltag':37 'would':14,68 'x':40 'zener':13,27,31,71"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/comment/662713"
    +editedAt: DateTimeImmutable @1688588351 {#4050
      date: 2023-07-05 22:19:11.0 +02:00
    }
    +createdAt: DateTimeImmutable @1688587916 {#4048
      date: 2023-07-05 22:11:56.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4030}
  +body: "How I would do it is to use two digital IO pins on the processor to generate the reference square wave. Put the sensor plus a series precision resistor between them and just pull one IO pin high as the other is pulled low and then swap them. That presumes that IO pins can both source and sink IO current. Then take the junction between the two to an Analogue in pin. You get two measurements each cycle. Use a lookup table of values and interpolate between them. If you wanted more precision - add more series resistors of different values covering the range of humidity that you want to sense, going to different IO pins. So you can choose the IO pin pair that brings the centre point between sensor and resistor closest to the mid-voltage point. It’s effectively a balanced half bridge arrangement - using the precision of the resistors to determine overall measurement precision. OK it ties up several IO pins - but microcontrollers are so cheap, I’d probably just dedicate one to this sensor and that’s all that it would do."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1688622526 {#4108
    date: 2023-07-06 07:48:46.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@macusking@discuss.tchncs.de"
    "@Susan_B_Good@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4105 …}
  +nested: Doctrine\ORM\PersistentCollection {#4102 …}
  +votes: Doctrine\ORM\PersistentCollection {#4099 …}
  +reports: Doctrine\ORM\PersistentCollection {#4114 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4116 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4118 …}
  -id: 8568
  -bodyTs: "'add':94 'analogu':70 'arrang':147 'balanc':144 'bridg':146 'bring':125 'centr':127 'cheap':170 'choos':119 'closest':133 'cover':101 'current':60 'cycl':78 'd':172 'dedic':175 'determin':155 'differ':99,113 'digit':10 'effect':142 'generat':17 'get':74 'go':111 'half':145 'high':38 'humid':105 'interpol':86 'io':11,36,52,59,114,121,164 'junction':64 'lookup':81 'low':44 'measur':76,157 'microcontrol':167 'mid':137 'mid-voltag':136 'ok':159 'one':35,176 'overal':156 'pair':123 'pin':12,37,53,72,115,122,165 'plus':25 'point':128,139 'precis':28,93,150,158 'presum':50 'probabl':173 'processor':15 'pull':34,43 'put':22 'rang':103 'refer':19 'resistor':29,97,132,153 'sens':110 'sensor':24,130,179 'seri':27,96 'sever':163 'sink':58 'sourc':56 'squar':20 'swap':47 'tabl':82 'take':62 'tie':161 'two':9,67,75 'use':8,79,148 'valu':84,100 'voltag':138 'want':91,108 'wave':21 'would':3,186"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/678173"
  +editedAt: null
  +createdAt: DateTimeImmutable @1688622526 {#4111
    date: 2023-07-06 07:48:46.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
null
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4135
  +user: Proxies\__CG__\App\Entity\User {#1943 …}
  +entry: App\Entity\Entry {#2388
    +user: Proxies\__CG__\App\Entity\User {#1943 …}
    +magazine: App\Entity\Magazine {#266
      +icon: Proxies\__CG__\App\Entity\Image {#247 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#276
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#238 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#234 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#223 …}
      +entries: Doctrine\ORM\PersistentCollection {#181 …}
      +posts: Doctrine\ORM\PersistentCollection {#139 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#201 …}
      +bans: Doctrine\ORM\PersistentCollection {#118 …}
      +reports: Doctrine\ORM\PersistentCollection {#104 …}
      +badges: Doctrine\ORM\PersistentCollection {#82 …}
      +logs: Doctrine\ORM\PersistentCollection {#72 …}
      +awards: Doctrine\ORM\PersistentCollection {#61 …}
      +categories: Doctrine\ORM\PersistentCollection {#1820 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#270
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#272
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1912 …}
    +slug: "Would-this-circuit-to-use-an-HR202-humidity-sensor-actually"
    +title: "Would this circuit to use an HR202 humidity sensor actually work?"
    +url: null
    +body: """
      ![](https://discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)\n
      \n
      I wanna run a HR202 moisture sensor and an Arduino. Yes, I picked a HR202 to challenge myself to make it work. I already have some easier-to-use SHT40 in stock.\n
      \n
      This sensor can only run with AC 1.5Vpeak max. So, I’ve created this little circuit to provide AC, and I’ll only read it when the oscillator output is HIGH, so I can read it briefly at the same time with the help of Arduino’s ADC. Could this circuit work? Thank you.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 4
    +favouriteCount: 1
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1688761530 {#2410
      date: 2023-07-07 22:25:30.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1866 …}
    +votes: Doctrine\ORM\PersistentCollection {#1978 …}
    +reports: Doctrine\ORM\PersistentCollection {#1946 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1971 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2443 …}
    +badges: Doctrine\ORM\PersistentCollection {#2426 …}
    +children: []
    -id: 875
    -titleTs: "'actual':10 'circuit':3 'hr202':7 'humid':8 'sensor':9 'use':5 'work':11 'would':1"
    -bodyTs: "'/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':3 '1.5':44 'ac':43,56 'adc':85 'alreadi':27 'arduino':13,83 'briefli':74 'challeng':20 'circuit':53,88 'could':86 'creat':50 'discuss.tchncs.de':2 'discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':1 'easier':31 'easier-to-us':30 'help':81 'high':68 'hr202':8,18 'littl':52 'll':59 'make':23 'max':46 'moistur':9 'oscil':65 'output':66 'pick':16 'provid':55 'read':61,72 'run':6,41 'sensor':10,38 'sht40':34 'stock':36 'thank':90 'time':78 'use':33 've':49 'vpeak':45 'wanna':5 'work':25,89 'yes':14"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1688598501
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/post/505309"
    +editedAt: null
    +createdAt: DateTimeImmutable @1688582501 {#1850
      date: 2023-07-05 20:41:41.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#266}
  +image: null
  +parent: App\Entity\EntryComment {#4113
    +user: App\Entity\User {#3978 …}
    +entry: App\Entity\Entry {#2388}
    +magazine: App\Entity\Magazine {#266}
    +image: null
    +parent: App\Entity\EntryComment {#4058
      +user: Proxies\__CG__\App\Entity\User {#1943 …}
      +entry: App\Entity\Entry {#2388}
      +magazine: App\Entity\Magazine {#266}
      +image: null
      +parent: App\Entity\EntryComment {#4030
        +user: App\Entity\User {#3978 …}
        +entry: App\Entity\Entry {#2388}
        +magazine: App\Entity\Magazine {#266}
        +image: null
        +parent: null
        +root: null
        +body: "I’m assuming that those "v"s are meters and not constant voltage sources. A 2.4v zener does NOT have exactly 2.4v across it. A 1.2 v supply will not be precisely 1.2v. Both will also vary with time and temperature. So, in practice there WILL be a dc component across the sensor - which will destroy it."
        +lang: "en"
        +isAdult: false
        +favouriteCount: 0
        +score: 0
        +lastActive: DateTime @1688761531 {#4039
          date: 2023-07-07 22:25:31.0 +02:00
        }
        +ip: null
        +tags: null
        +mentions: [
          "@macusking@discuss.tchncs.de"
        ]
        +children: Doctrine\ORM\PersistentCollection {#4028 …}
        +nested: Doctrine\ORM\PersistentCollection {#4026 …}
        +votes: Doctrine\ORM\PersistentCollection {#4024 …}
        +reports: Doctrine\ORM\PersistentCollection {#4022 …}
        +favourites: Doctrine\ORM\PersistentCollection {#3990 …}
        +notifications: Doctrine\ORM\PersistentCollection {#3994 …}
        -id: 8469
        -bodyTs: "'1.2':28,35 '2.4':16,23 'across':25,54 'also':39 'assum':3 'compon':53 'constant':12 'dc':52 'destroy':59 'exact':22 'm':2 'meter':9 'practic':47 'precis':34 'sensor':56 'sourc':14 'suppli':30 'temperatur':44 'time':42 'v':6,17,24,29,36 'vari':40 'voltag':13 'zener':18"
        +ranking: 0
        +commentCount: 0
        +upVotes: 0
        +downVotes: 0
        +visibility: "visible             "
        +apId: "https://discuss.tchncs.de/comment/661762"
        +editedAt: null
        +createdAt: DateTimeImmutable @1688586156 {#3975
          date: 2023-07-05 21:42:36.0 +02:00
        }
      }
      +root: App\Entity\EntryComment {#4030}
      +body: "Thank you. Do you recommend me something (circuit) else? The 2.4v zener would provide about 2.4v. To keep 1.2V exactly half of the zener produced by the zener, I was considering split its voltage with 2 x 10k resistor in series and feed into an opamp in buffer configuration, so even it the 2.4 reference changes a little bit, the other side of circuit would be always zener / 2."
      +lang: "en"
      +isAdult: false
      +favouriteCount: 0
      +score: 0
      +lastActive: DateTime @1688587916 {#4053
        date: 2023-07-05 22:11:56.0 +02:00
      }
      +ip: null
      +tags: null
      +mentions: [
        "@macusking@discuss.tchncs.de"
        "@Susan_B_Good@discuss.tchncs.de"
      ]
      +children: Doctrine\ORM\PersistentCollection {#4061 …}
      +nested: Doctrine\ORM\PersistentCollection {#4063 …}
      +votes: Doctrine\ORM\PersistentCollection {#4065 …}
      +reports: Doctrine\ORM\PersistentCollection {#4046 …}
      +favourites: Doctrine\ORM\PersistentCollection {#4044 …}
      +notifications: Doctrine\ORM\PersistentCollection {#4042 …}
      -id: 8472
      -bodyTs: "'1.2':21 '10k':41 '2':39,72 '2.4':11,17,57 'alway':70 'bit':62 'buffer':51 'chang':59 'circuit':8,67 'configur':52 'consid':34 'els':9 'even':54 'exact':23 'feed':46 'half':24 'keep':20 'littl':61 'opamp':49 'produc':28 'provid':15 'recommend':5 'refer':58 'resistor':42 'seri':44 'side':65 'someth':7 'split':35 'thank':1 'v':12,18,22 'voltag':37 'would':14,68 'x':40 'zener':13,27,31,71"
      +ranking: 0
      +commentCount: 0
      +upVotes: 0
      +downVotes: 0
      +visibility: "visible             "
      +apId: "https://discuss.tchncs.de/comment/662713"
      +editedAt: DateTimeImmutable @1688588351 {#4050
        date: 2023-07-05 22:19:11.0 +02:00
      }
      +createdAt: DateTimeImmutable @1688587916 {#4048
        date: 2023-07-05 22:11:56.0 +02:00
      }
    }
    +root: App\Entity\EntryComment {#4030}
    +body: "How I would do it is to use two digital IO pins on the processor to generate the reference square wave. Put the sensor plus a series precision resistor between them and just pull one IO pin high as the other is pulled low and then swap them. That presumes that IO pins can both source and sink IO current. Then take the junction between the two to an Analogue in pin. You get two measurements each cycle. Use a lookup table of values and interpolate between them. If you wanted more precision - add more series resistors of different values covering the range of humidity that you want to sense, going to different IO pins. So you can choose the IO pin pair that brings the centre point between sensor and resistor closest to the mid-voltage point. It’s effectively a balanced half bridge arrangement - using the precision of the resistors to determine overall measurement precision. OK it ties up several IO pins - but microcontrollers are so cheap, I’d probably just dedicate one to this sensor and that’s all that it would do."
    +lang: "en"
    +isAdult: false
    +favouriteCount: 1
    +score: 0
    +lastActive: DateTime @1688622526 {#4108
      date: 2023-07-06 07:48:46.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@macusking@discuss.tchncs.de"
      "@Susan_B_Good@discuss.tchncs.de"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4105 …}
    +nested: Doctrine\ORM\PersistentCollection {#4102 …}
    +votes: Doctrine\ORM\PersistentCollection {#4099 …}
    +reports: Doctrine\ORM\PersistentCollection {#4114 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4116 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4118 …}
    -id: 8568
    -bodyTs: "'add':94 'analogu':70 'arrang':147 'balanc':144 'bridg':146 'bring':125 'centr':127 'cheap':170 'choos':119 'closest':133 'cover':101 'current':60 'cycl':78 'd':172 'dedic':175 'determin':155 'differ':99,113 'digit':10 'effect':142 'generat':17 'get':74 'go':111 'half':145 'high':38 'humid':105 'interpol':86 'io':11,36,52,59,114,121,164 'junction':64 'lookup':81 'low':44 'measur':76,157 'microcontrol':167 'mid':137 'mid-voltag':136 'ok':159 'one':35,176 'overal':156 'pair':123 'pin':12,37,53,72,115,122,165 'plus':25 'point':128,139 'precis':28,93,150,158 'presum':50 'probabl':173 'processor':15 'pull':34,43 'put':22 'rang':103 'refer':19 'resistor':29,97,132,153 'sens':110 'sensor':24,130,179 'seri':27,96 'sever':163 'sink':58 'sourc':56 'squar':20 'swap':47 'tabl':82 'take':62 'tie':161 'two':9,67,75 'use':8,79,148 'valu':84,100 'voltag':138 'want':91,108 'wave':21 'would':3,186"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/comment/678173"
    +editedAt: null
    +createdAt: DateTimeImmutable @1688622526 {#4111
      date: 2023-07-06 07:48:46.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4030}
  +body: "Thank you. I’ll try this approach!"
  +lang: "en"
  +isAdult: false
  +favouriteCount: 0
  +score: 0
  +lastActive: DateTime @1688761530 {#4130
    date: 2023-07-07 22:25:30.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@macusking@discuss.tchncs.de"
    "@Susan_B_Good@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4127 …}
  +nested: Doctrine\ORM\PersistentCollection {#4124 …}
  +votes: Doctrine\ORM\PersistentCollection {#4122 …}
  +reports: Doctrine\ORM\PersistentCollection {#4136 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4138 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4140 …}
  -id: 9042
  -bodyTs: "'approach':7 'll':4 'thank':1 'tri':5"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/749520"
  +editedAt: null
  +createdAt: DateTimeImmutable @1688761530 {#4133
    date: 2023-07-07 22:25:30.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4135
  +user: Proxies\__CG__\App\Entity\User {#1943 …}
  +entry: App\Entity\Entry {#2388
    +user: Proxies\__CG__\App\Entity\User {#1943 …}
    +magazine: App\Entity\Magazine {#266
      +icon: Proxies\__CG__\App\Entity\Image {#247 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#276
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#238 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#234 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#223 …}
      +entries: Doctrine\ORM\PersistentCollection {#181 …}
      +posts: Doctrine\ORM\PersistentCollection {#139 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#201 …}
      +bans: Doctrine\ORM\PersistentCollection {#118 …}
      +reports: Doctrine\ORM\PersistentCollection {#104 …}
      +badges: Doctrine\ORM\PersistentCollection {#82 …}
      +logs: Doctrine\ORM\PersistentCollection {#72 …}
      +awards: Doctrine\ORM\PersistentCollection {#61 …}
      +categories: Doctrine\ORM\PersistentCollection {#1820 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#270
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#272
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1912 …}
    +slug: "Would-this-circuit-to-use-an-HR202-humidity-sensor-actually"
    +title: "Would this circuit to use an HR202 humidity sensor actually work?"
    +url: null
    +body: """
      ![](https://discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)\n
      \n
      I wanna run a HR202 moisture sensor and an Arduino. Yes, I picked a HR202 to challenge myself to make it work. I already have some easier-to-use SHT40 in stock.\n
      \n
      This sensor can only run with AC 1.5Vpeak max. So, I’ve created this little circuit to provide AC, and I’ll only read it when the oscillator output is HIGH, so I can read it briefly at the same time with the help of Arduino’s ADC. Could this circuit work? Thank you.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 4
    +favouriteCount: 1
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1688761530 {#2410
      date: 2023-07-07 22:25:30.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1866 …}
    +votes: Doctrine\ORM\PersistentCollection {#1978 …}
    +reports: Doctrine\ORM\PersistentCollection {#1946 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1971 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2443 …}
    +badges: Doctrine\ORM\PersistentCollection {#2426 …}
    +children: []
    -id: 875
    -titleTs: "'actual':10 'circuit':3 'hr202':7 'humid':8 'sensor':9 'use':5 'work':11 'would':1"
    -bodyTs: "'/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':3 '1.5':44 'ac':43,56 'adc':85 'alreadi':27 'arduino':13,83 'briefli':74 'challeng':20 'circuit':53,88 'could':86 'creat':50 'discuss.tchncs.de':2 'discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':1 'easier':31 'easier-to-us':30 'help':81 'high':68 'hr202':8,18 'littl':52 'll':59 'make':23 'max':46 'moistur':9 'oscil':65 'output':66 'pick':16 'provid':55 'read':61,72 'run':6,41 'sensor':10,38 'sht40':34 'stock':36 'thank':90 'time':78 'use':33 've':49 'vpeak':45 'wanna':5 'work':25,89 'yes':14"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1688598501
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/post/505309"
    +editedAt: null
    +createdAt: DateTimeImmutable @1688582501 {#1850
      date: 2023-07-05 20:41:41.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#266}
  +image: null
  +parent: App\Entity\EntryComment {#4113
    +user: App\Entity\User {#3978 …}
    +entry: App\Entity\Entry {#2388}
    +magazine: App\Entity\Magazine {#266}
    +image: null
    +parent: App\Entity\EntryComment {#4058
      +user: Proxies\__CG__\App\Entity\User {#1943 …}
      +entry: App\Entity\Entry {#2388}
      +magazine: App\Entity\Magazine {#266}
      +image: null
      +parent: App\Entity\EntryComment {#4030
        +user: App\Entity\User {#3978 …}
        +entry: App\Entity\Entry {#2388}
        +magazine: App\Entity\Magazine {#266}
        +image: null
        +parent: null
        +root: null
        +body: "I’m assuming that those "v"s are meters and not constant voltage sources. A 2.4v zener does NOT have exactly 2.4v across it. A 1.2 v supply will not be precisely 1.2v. Both will also vary with time and temperature. So, in practice there WILL be a dc component across the sensor - which will destroy it."
        +lang: "en"
        +isAdult: false
        +favouriteCount: 0
        +score: 0
        +lastActive: DateTime @1688761531 {#4039
          date: 2023-07-07 22:25:31.0 +02:00
        }
        +ip: null
        +tags: null
        +mentions: [
          "@macusking@discuss.tchncs.de"
        ]
        +children: Doctrine\ORM\PersistentCollection {#4028 …}
        +nested: Doctrine\ORM\PersistentCollection {#4026 …}
        +votes: Doctrine\ORM\PersistentCollection {#4024 …}
        +reports: Doctrine\ORM\PersistentCollection {#4022 …}
        +favourites: Doctrine\ORM\PersistentCollection {#3990 …}
        +notifications: Doctrine\ORM\PersistentCollection {#3994 …}
        -id: 8469
        -bodyTs: "'1.2':28,35 '2.4':16,23 'across':25,54 'also':39 'assum':3 'compon':53 'constant':12 'dc':52 'destroy':59 'exact':22 'm':2 'meter':9 'practic':47 'precis':34 'sensor':56 'sourc':14 'suppli':30 'temperatur':44 'time':42 'v':6,17,24,29,36 'vari':40 'voltag':13 'zener':18"
        +ranking: 0
        +commentCount: 0
        +upVotes: 0
        +downVotes: 0
        +visibility: "visible             "
        +apId: "https://discuss.tchncs.de/comment/661762"
        +editedAt: null
        +createdAt: DateTimeImmutable @1688586156 {#3975
          date: 2023-07-05 21:42:36.0 +02:00
        }
      }
      +root: App\Entity\EntryComment {#4030}
      +body: "Thank you. Do you recommend me something (circuit) else? The 2.4v zener would provide about 2.4v. To keep 1.2V exactly half of the zener produced by the zener, I was considering split its voltage with 2 x 10k resistor in series and feed into an opamp in buffer configuration, so even it the 2.4 reference changes a little bit, the other side of circuit would be always zener / 2."
      +lang: "en"
      +isAdult: false
      +favouriteCount: 0
      +score: 0
      +lastActive: DateTime @1688587916 {#4053
        date: 2023-07-05 22:11:56.0 +02:00
      }
      +ip: null
      +tags: null
      +mentions: [
        "@macusking@discuss.tchncs.de"
        "@Susan_B_Good@discuss.tchncs.de"
      ]
      +children: Doctrine\ORM\PersistentCollection {#4061 …}
      +nested: Doctrine\ORM\PersistentCollection {#4063 …}
      +votes: Doctrine\ORM\PersistentCollection {#4065 …}
      +reports: Doctrine\ORM\PersistentCollection {#4046 …}
      +favourites: Doctrine\ORM\PersistentCollection {#4044 …}
      +notifications: Doctrine\ORM\PersistentCollection {#4042 …}
      -id: 8472
      -bodyTs: "'1.2':21 '10k':41 '2':39,72 '2.4':11,17,57 'alway':70 'bit':62 'buffer':51 'chang':59 'circuit':8,67 'configur':52 'consid':34 'els':9 'even':54 'exact':23 'feed':46 'half':24 'keep':20 'littl':61 'opamp':49 'produc':28 'provid':15 'recommend':5 'refer':58 'resistor':42 'seri':44 'side':65 'someth':7 'split':35 'thank':1 'v':12,18,22 'voltag':37 'would':14,68 'x':40 'zener':13,27,31,71"
      +ranking: 0
      +commentCount: 0
      +upVotes: 0
      +downVotes: 0
      +visibility: "visible             "
      +apId: "https://discuss.tchncs.de/comment/662713"
      +editedAt: DateTimeImmutable @1688588351 {#4050
        date: 2023-07-05 22:19:11.0 +02:00
      }
      +createdAt: DateTimeImmutable @1688587916 {#4048
        date: 2023-07-05 22:11:56.0 +02:00
      }
    }
    +root: App\Entity\EntryComment {#4030}
    +body: "How I would do it is to use two digital IO pins on the processor to generate the reference square wave. Put the sensor plus a series precision resistor between them and just pull one IO pin high as the other is pulled low and then swap them. That presumes that IO pins can both source and sink IO current. Then take the junction between the two to an Analogue in pin. You get two measurements each cycle. Use a lookup table of values and interpolate between them. If you wanted more precision - add more series resistors of different values covering the range of humidity that you want to sense, going to different IO pins. So you can choose the IO pin pair that brings the centre point between sensor and resistor closest to the mid-voltage point. It’s effectively a balanced half bridge arrangement - using the precision of the resistors to determine overall measurement precision. OK it ties up several IO pins - but microcontrollers are so cheap, I’d probably just dedicate one to this sensor and that’s all that it would do."
    +lang: "en"
    +isAdult: false
    +favouriteCount: 1
    +score: 0
    +lastActive: DateTime @1688622526 {#4108
      date: 2023-07-06 07:48:46.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@macusking@discuss.tchncs.de"
      "@Susan_B_Good@discuss.tchncs.de"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4105 …}
    +nested: Doctrine\ORM\PersistentCollection {#4102 …}
    +votes: Doctrine\ORM\PersistentCollection {#4099 …}
    +reports: Doctrine\ORM\PersistentCollection {#4114 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4116 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4118 …}
    -id: 8568
    -bodyTs: "'add':94 'analogu':70 'arrang':147 'balanc':144 'bridg':146 'bring':125 'centr':127 'cheap':170 'choos':119 'closest':133 'cover':101 'current':60 'cycl':78 'd':172 'dedic':175 'determin':155 'differ':99,113 'digit':10 'effect':142 'generat':17 'get':74 'go':111 'half':145 'high':38 'humid':105 'interpol':86 'io':11,36,52,59,114,121,164 'junction':64 'lookup':81 'low':44 'measur':76,157 'microcontrol':167 'mid':137 'mid-voltag':136 'ok':159 'one':35,176 'overal':156 'pair':123 'pin':12,37,53,72,115,122,165 'plus':25 'point':128,139 'precis':28,93,150,158 'presum':50 'probabl':173 'processor':15 'pull':34,43 'put':22 'rang':103 'refer':19 'resistor':29,97,132,153 'sens':110 'sensor':24,130,179 'seri':27,96 'sever':163 'sink':58 'sourc':56 'squar':20 'swap':47 'tabl':82 'take':62 'tie':161 'two':9,67,75 'use':8,79,148 'valu':84,100 'voltag':138 'want':91,108 'wave':21 'would':3,186"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/comment/678173"
    +editedAt: null
    +createdAt: DateTimeImmutable @1688622526 {#4111
      date: 2023-07-06 07:48:46.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4030}
  +body: "Thank you. I’ll try this approach!"
  +lang: "en"
  +isAdult: false
  +favouriteCount: 0
  +score: 0
  +lastActive: DateTime @1688761530 {#4130
    date: 2023-07-07 22:25:30.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@macusking@discuss.tchncs.de"
    "@Susan_B_Good@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4127 …}
  +nested: Doctrine\ORM\PersistentCollection {#4124 …}
  +votes: Doctrine\ORM\PersistentCollection {#4122 …}
  +reports: Doctrine\ORM\PersistentCollection {#4136 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4138 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4140 …}
  -id: 9042
  -bodyTs: "'approach':7 'll':4 'thank':1 'tri':5"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/749520"
  +editedAt: null
  +createdAt: DateTimeImmutable @1688761530 {#4133
    date: 2023-07-07 22:25:30.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4135
  +user: Proxies\__CG__\App\Entity\User {#1943 …}
  +entry: App\Entity\Entry {#2388
    +user: Proxies\__CG__\App\Entity\User {#1943 …}
    +magazine: App\Entity\Magazine {#266
      +icon: Proxies\__CG__\App\Entity\Image {#247 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#276
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#238 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#234 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#223 …}
      +entries: Doctrine\ORM\PersistentCollection {#181 …}
      +posts: Doctrine\ORM\PersistentCollection {#139 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#201 …}
      +bans: Doctrine\ORM\PersistentCollection {#118 …}
      +reports: Doctrine\ORM\PersistentCollection {#104 …}
      +badges: Doctrine\ORM\PersistentCollection {#82 …}
      +logs: Doctrine\ORM\PersistentCollection {#72 …}
      +awards: Doctrine\ORM\PersistentCollection {#61 …}
      +categories: Doctrine\ORM\PersistentCollection {#1820 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#270
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#272
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1912 …}
    +slug: "Would-this-circuit-to-use-an-HR202-humidity-sensor-actually"
    +title: "Would this circuit to use an HR202 humidity sensor actually work?"
    +url: null
    +body: """
      ![](https://discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)\n
      \n
      I wanna run a HR202 moisture sensor and an Arduino. Yes, I picked a HR202 to challenge myself to make it work. I already have some easier-to-use SHT40 in stock.\n
      \n
      This sensor can only run with AC 1.5Vpeak max. So, I’ve created this little circuit to provide AC, and I’ll only read it when the oscillator output is HIGH, so I can read it briefly at the same time with the help of Arduino’s ADC. Could this circuit work? Thank you.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 4
    +favouriteCount: 1
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1688761530 {#2410
      date: 2023-07-07 22:25:30.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1866 …}
    +votes: Doctrine\ORM\PersistentCollection {#1978 …}
    +reports: Doctrine\ORM\PersistentCollection {#1946 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1971 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2443 …}
    +badges: Doctrine\ORM\PersistentCollection {#2426 …}
    +children: []
    -id: 875
    -titleTs: "'actual':10 'circuit':3 'hr202':7 'humid':8 'sensor':9 'use':5 'work':11 'would':1"
    -bodyTs: "'/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':3 '1.5':44 'ac':43,56 'adc':85 'alreadi':27 'arduino':13,83 'briefli':74 'challeng':20 'circuit':53,88 'could':86 'creat':50 'discuss.tchncs.de':2 'discuss.tchncs.de/pictrs/image/e2575314-be01-4a3f-bab2-cc75811b3ce8.png)':1 'easier':31 'easier-to-us':30 'help':81 'high':68 'hr202':8,18 'littl':52 'll':59 'make':23 'max':46 'moistur':9 'oscil':65 'output':66 'pick':16 'provid':55 'read':61,72 'run':6,41 'sensor':10,38 'sht40':34 'stock':36 'thank':90 'time':78 'use':33 've':49 'vpeak':45 'wanna':5 'work':25,89 'yes':14"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1688598501
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/post/505309"
    +editedAt: null
    +createdAt: DateTimeImmutable @1688582501 {#1850
      date: 2023-07-05 20:41:41.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#266}
  +image: null
  +parent: App\Entity\EntryComment {#4113
    +user: App\Entity\User {#3978 …}
    +entry: App\Entity\Entry {#2388}
    +magazine: App\Entity\Magazine {#266}
    +image: null
    +parent: App\Entity\EntryComment {#4058
      +user: Proxies\__CG__\App\Entity\User {#1943 …}
      +entry: App\Entity\Entry {#2388}
      +magazine: App\Entity\Magazine {#266}
      +image: null
      +parent: App\Entity\EntryComment {#4030
        +user: App\Entity\User {#3978 …}
        +entry: App\Entity\Entry {#2388}
        +magazine: App\Entity\Magazine {#266}
        +image: null
        +parent: null
        +root: null
        +body: "I’m assuming that those "v"s are meters and not constant voltage sources. A 2.4v zener does NOT have exactly 2.4v across it. A 1.2 v supply will not be precisely 1.2v. Both will also vary with time and temperature. So, in practice there WILL be a dc component across the sensor - which will destroy it."
        +lang: "en"
        +isAdult: false
        +favouriteCount: 0
        +score: 0
        +lastActive: DateTime @1688761531 {#4039
          date: 2023-07-07 22:25:31.0 +02:00
        }
        +ip: null
        +tags: null
        +mentions: [
          "@macusking@discuss.tchncs.de"
        ]
        +children: Doctrine\ORM\PersistentCollection {#4028 …}
        +nested: Doctrine\ORM\PersistentCollection {#4026 …}
        +votes: Doctrine\ORM\PersistentCollection {#4024 …}
        +reports: Doctrine\ORM\PersistentCollection {#4022 …}
        +favourites: Doctrine\ORM\PersistentCollection {#3990 …}
        +notifications: Doctrine\ORM\PersistentCollection {#3994 …}
        -id: 8469
        -bodyTs: "'1.2':28,35 '2.4':16,23 'across':25,54 'also':39 'assum':3 'compon':53 'constant':12 'dc':52 'destroy':59 'exact':22 'm':2 'meter':9 'practic':47 'precis':34 'sensor':56 'sourc':14 'suppli':30 'temperatur':44 'time':42 'v':6,17,24,29,36 'vari':40 'voltag':13 'zener':18"
        +ranking: 0
        +commentCount: 0
        +upVotes: 0
        +downVotes: 0
        +visibility: "visible             "
        +apId: "https://discuss.tchncs.de/comment/661762"
        +editedAt: null
        +createdAt: DateTimeImmutable @1688586156 {#3975
          date: 2023-07-05 21:42:36.0 +02:00
        }
      }
      +root: App\Entity\EntryComment {#4030}
      +body: "Thank you. Do you recommend me something (circuit) else? The 2.4v zener would provide about 2.4v. To keep 1.2V exactly half of the zener produced by the zener, I was considering split its voltage with 2 x 10k resistor in series and feed into an opamp in buffer configuration, so even it the 2.4 reference changes a little bit, the other side of circuit would be always zener / 2."
      +lang: "en"
      +isAdult: false
      +favouriteCount: 0
      +score: 0
      +lastActive: DateTime @1688587916 {#4053
        date: 2023-07-05 22:11:56.0 +02:00
      }
      +ip: null
      +tags: null
      +mentions: [
        "@macusking@discuss.tchncs.de"
        "@Susan_B_Good@discuss.tchncs.de"
      ]
      +children: Doctrine\ORM\PersistentCollection {#4061 …}
      +nested: Doctrine\ORM\PersistentCollection {#4063 …}
      +votes: Doctrine\ORM\PersistentCollection {#4065 …}
      +reports: Doctrine\ORM\PersistentCollection {#4046 …}
      +favourites: Doctrine\ORM\PersistentCollection {#4044 …}
      +notifications: Doctrine\ORM\PersistentCollection {#4042 …}
      -id: 8472
      -bodyTs: "'1.2':21 '10k':41 '2':39,72 '2.4':11,17,57 'alway':70 'bit':62 'buffer':51 'chang':59 'circuit':8,67 'configur':52 'consid':34 'els':9 'even':54 'exact':23 'feed':46 'half':24 'keep':20 'littl':61 'opamp':49 'produc':28 'provid':15 'recommend':5 'refer':58 'resistor':42 'seri':44 'side':65 'someth':7 'split':35 'thank':1 'v':12,18,22 'voltag':37 'would':14,68 'x':40 'zener':13,27,31,71"
      +ranking: 0
      +commentCount: 0
      +upVotes: 0
      +downVotes: 0
      +visibility: "visible             "
      +apId: "https://discuss.tchncs.de/comment/662713"
      +editedAt: DateTimeImmutable @1688588351 {#4050
        date: 2023-07-05 22:19:11.0 +02:00
      }
      +createdAt: DateTimeImmutable @1688587916 {#4048
        date: 2023-07-05 22:11:56.0 +02:00
      }
    }
    +root: App\Entity\EntryComment {#4030}
    +body: "How I would do it is to use two digital IO pins on the processor to generate the reference square wave. Put the sensor plus a series precision resistor between them and just pull one IO pin high as the other is pulled low and then swap them. That presumes that IO pins can both source and sink IO current. Then take the junction between the two to an Analogue in pin. You get two measurements each cycle. Use a lookup table of values and interpolate between them. If you wanted more precision - add more series resistors of different values covering the range of humidity that you want to sense, going to different IO pins. So you can choose the IO pin pair that brings the centre point between sensor and resistor closest to the mid-voltage point. It’s effectively a balanced half bridge arrangement - using the precision of the resistors to determine overall measurement precision. OK it ties up several IO pins - but microcontrollers are so cheap, I’d probably just dedicate one to this sensor and that’s all that it would do."
    +lang: "en"
    +isAdult: false
    +favouriteCount: 1
    +score: 0
    +lastActive: DateTime @1688622526 {#4108
      date: 2023-07-06 07:48:46.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@macusking@discuss.tchncs.de"
      "@Susan_B_Good@discuss.tchncs.de"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4105 …}
    +nested: Doctrine\ORM\PersistentCollection {#4102 …}
    +votes: Doctrine\ORM\PersistentCollection {#4099 …}
    +reports: Doctrine\ORM\PersistentCollection {#4114 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4116 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4118 …}
    -id: 8568
    -bodyTs: "'add':94 'analogu':70 'arrang':147 'balanc':144 'bridg':146 'bring':125 'centr':127 'cheap':170 'choos':119 'closest':133 'cover':101 'current':60 'cycl':78 'd':172 'dedic':175 'determin':155 'differ':99,113 'digit':10 'effect':142 'generat':17 'get':74 'go':111 'half':145 'high':38 'humid':105 'interpol':86 'io':11,36,52,59,114,121,164 'junction':64 'lookup':81 'low':44 'measur':76,157 'microcontrol':167 'mid':137 'mid-voltag':136 'ok':159 'one':35,176 'overal':156 'pair':123 'pin':12,37,53,72,115,122,165 'plus':25 'point':128,139 'precis':28,93,150,158 'presum':50 'probabl':173 'processor':15 'pull':34,43 'put':22 'rang':103 'refer':19 'resistor':29,97,132,153 'sens':110 'sensor':24,130,179 'seri':27,96 'sever':163 'sink':58 'sourc':56 'squar':20 'swap':47 'tabl':82 'take':62 'tie':161 'two':9,67,75 'use':8,79,148 'valu':84,100 'voltag':138 'want':91,108 'wave':21 'would':3,186"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/comment/678173"
    +editedAt: null
    +createdAt: DateTimeImmutable @1688622526 {#4111
      date: 2023-07-06 07:48:46.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4030}
  +body: "Thank you. I’ll try this approach!"
  +lang: "en"
  +isAdult: false
  +favouriteCount: 0
  +score: 0
  +lastActive: DateTime @1688761530 {#4130
    date: 2023-07-07 22:25:30.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@macusking@discuss.tchncs.de"
    "@Susan_B_Good@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4127 …}
  +nested: Doctrine\ORM\PersistentCollection {#4124 …}
  +votes: Doctrine\ORM\PersistentCollection {#4122 …}
  +reports: Doctrine\ORM\PersistentCollection {#4136 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4138 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4140 …}
  -id: 9042
  -bodyTs: "'approach':7 'll':4 'thank':1 'tri':5"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/749520"
  +editedAt: null
  +createdAt: DateTimeImmutable @1688761530 {#4133
    date: 2023-07-07 22:25:30.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\Magazine {#266
  +icon: Proxies\__CG__\App\Entity\Image {#247 …}
  +name: "askelectronics@discuss.tchncs.de"
  +title: "askelectronics"
  +description: """
    **For questions about component-level electronic circuits, tools and equipment.**\n
    \n
    Rules\n
    -----\n
    \n
    1: Be nice.\n
    \n
    2: Be on-topic (eg: *Electronic*, not *electrical*).\n
    \n
    3: No commercial stuff, buying, selling or valuations.\n
    \n
    4: Be safe.\n
    \n
    ---
    """
  +rules: null
  +subscriptionsCount: 1
  +entryCount: 154
  +entryCommentCount: 1230
  +postCount: 1
  +postCommentCount: 4
  +isAdult: false
  +customCss: null
  +lastActive: DateTime @1729413608 {#276
    date: 2024-10-20 10:40:08.0 +02:00
  }
  +markedForDeletionAt: null
  +tags: null
  +moderators: Doctrine\ORM\PersistentCollection {#238 …}
  +ownershipRequests: Doctrine\ORM\PersistentCollection {#234 …}
  +moderatorRequests: Doctrine\ORM\PersistentCollection {#223 …}
  +entries: Doctrine\ORM\PersistentCollection {#181 …}
  +posts: Doctrine\ORM\PersistentCollection {#139 …}
  +subscriptions: Doctrine\ORM\PersistentCollection {#201 …}
  +bans: Doctrine\ORM\PersistentCollection {#118 …}
  +reports: Doctrine\ORM\PersistentCollection {#104 …}
  +badges: Doctrine\ORM\PersistentCollection {#82 …}
  +logs: Doctrine\ORM\PersistentCollection {#72 …}
  +awards: Doctrine\ORM\PersistentCollection {#61 …}
  +categories: Doctrine\ORM\PersistentCollection {#1820 …}
  -id: 11
  +apId: "askelectronics@discuss.tchncs.de"
  +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
  +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
  +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
  +apInboxUrl: "https://discuss.tchncs.de/inbox"
  +apDomain: "discuss.tchncs.de"
  +apPreferredUsername: "askelectronics"
  +apDiscoverable: true
  +apManuallyApprovesFollowers: null
  +privateKey: null
  +publicKey: null
  +apFetchedAt: DateTime @1727247714 {#270
    date: 2024-09-25 09:01:54.0 +02:00
  }
  +apDeletedAt: null
  +apTimeoutAt: null
  +visibility: "visible             "
  +createdAt: DateTimeImmutable @1687144409 {#272
    date: 2023-06-19 05:13:29.0 +02:00
  }
}
"App\Security\Voter\UserVoter"

Symfony Profiler

GET https://kbin.spritesserver.nl/m/askelectronics@discuss.tchncs.de/t/875/Would-this-circuit-to-use-an-HR202-humidity-sensor-actually/newest

Configuration Settings

Theme

Page Width

Security

Token

Firewall

Configuration

Listeners

Authenticators

Access Decision

Access decision log