GET https://kbin.spritesserver.nl/index.php/m/electronics@discuss.tchncs.de/t/48/The-first-double-sided-board-I-made-at-home/comment/163/votes/up

Response
200 OK
IP
216.73.216.136
Profiled on
Token
252d4a

Security

Token

There is no security token.

Firewall

main Name
Security enabled
Stateless

Configuration

Key Value
provider security.user.provider.concrete.app_user_provider
context main
entry_point App\Security\KbinAuthenticator
user_checker App\Security\UserChecker
access_denied_handler (none)
access_denied_url (none)
authenticators 
[
  "two_factor"
  "remember_me"
  "App\Security\KbinAuthenticator"
  "App\Security\FacebookAuthenticator"
  "App\Security\GoogleAuthenticator"
  "App\Security\GithubAuthenticator"
  "App\Security\KeycloakAuthenticator"
]

Listeners

Listener Duration Response 
Symfony\Component\Security\Http\Firewall\ChannelListener {#723
  -map: Symfony\Component\Security\Http\AccessMap {#722 …}
  -logger: Monolog\Logger {#783 …}
  -httpPort: 80
  -httpsPort: 443
}
 0.00 ms (none) 
Symfony\Component\Security\Http\Firewall\ContextListener {#706
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\TokenStorage {#1017 …}
  -sessionKey: "_security_main"
  -logger: Monolog\Logger {#783 …}
  -userProviders: Symfony\Component\DependencyInjection\Argument\RewindableGenerator {#705 …}
  -dispatcher: Symfony\Component\EventDispatcher\Debug\TraceableEventDispatcher {#747 …}
  -registered: false
  -trustResolver: Scheb\TwoFactorBundle\Security\Authentication\AuthenticationTrustResolver {#780 …}
  -sessionTrackerEnabler: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage::enableUsageTracking(): void {#703 …}
}
 3.31 ms (none) 
Symfony\Component\Security\Http\Firewall\AuthenticatorManagerListener {#584
  -authenticatorManager: Symfony\Component\Security\Http\Authentication\AuthenticatorManager {#595 …}
}
 0.00 ms (none) 
Scheb\TwoFactorBundle\Security\Http\Firewall\TwoFactorAccessListener {#582
  -twoFactorFirewallConfig: Scheb\TwoFactorBundle\Security\TwoFactor\TwoFactorFirewallConfig {#842 …}
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …}
  -twoFactorAccessDecider: Scheb\TwoFactorBundle\Security\Authorization\TwoFactorAccessDecider {#581 …}
}
 0.05 ms (none) 
Symfony\Component\Security\Http\Firewall\AccessListener {#579
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …}
  -accessDecisionManager: Symfony\Component\Security\Core\Authorization\TraceableAccessDecisionManager {#937 …}
  -map: Symfony\Component\Security\Http\AccessMap {#722 …}
}
 0.00 ms (none) 
Symfony\Component\Security\Http\Firewall\LogoutListener {#786
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …}
  -options: [
    "csrf_parameter" => "_csrf_token"
    "csrf_token_id" => "logout"
    "logout_path" => "app_logout"
  ]
  -httpUtils: Symfony\Component\Security\Http\HttpUtils {#841 …}
  -csrfTokenManager: Symfony\Component\Security\Csrf\CsrfTokenManager {#1015 …}
  -eventDispatcher: Symfony\Component\EventDispatcher\Debug\TraceableEventDispatcher {#747 …}
}
 0.00 ms (none)

Authenticators

No authenticators have been recorded. Check previous profiles on your authentication endpoint.

Access Decision

affirmative Strategy
# Voter class
1 
"Symfony\Component\Security\Core\Authorization\Voter\AuthenticatedVoter"
2 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
3 
"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
4 
"Symfony\Component\Security\Core\Authorization\Voter\ExpressionVoter"
5 
"App\Security\Voter\EntryCommentVoter"
6 
"App\Security\Voter\EntryVoter"
7 
"App\Security\Voter\MagazineVoter"
8 
"App\Security\Voter\MessageThreadVoter"
9 
"App\Security\Voter\MessageVoter"
10 
"App\Security\Voter\NotificationVoter"
11 
"App\Security\Voter\OAuth2UserConsentVoter"
12 
"App\Security\Voter\PostCommentVoter"
13 
"App\Security\Voter\PostVoter"
14 
"App\Security\Voter\UserVoter"

Access decision log

# Result Attributes Object
1 DENIED ROLE_USER 
null
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
2 DENIED moderate 
App\Entity\EntryComment {#1378
  +user: Proxies\__CG__\App\Entity\User {#1882 …}
  +entry: App\Entity\Entry {#1856 …}
  +magazine: App\Entity\Magazine {#312
    +icon: Proxies\__CG__\App\Entity\Image {#293 …}
    +name: "electronics@discuss.tchncs.de"
    +title: "electronics"
    +description: """
      **Projects, pictures, industry discussions and news about electronic engineering & component-level electronic circuits.**\n
      \n
      Rules\n
      -----\n
      \n
      1: Be nice.\n
      \n
      2: Be on-topic (eg: *Electronic*, not *electrical*).\n
      \n
      3: No commercial stuff, buying, selling or valuations.\n
      \n
      4: No circuit design or repair, tools or component questions.\n
      \n
      5: No excessively promoting your own sites, social media, videos etc.\n
      \n
      ---\n
      \n
      *Ask questions in [discuss.tchncs.de/c/askelectronics](https://discuss.tchncs.de/c/askelectronics)*\n
      \n
      ---
      """
    +rules: null
    +subscriptionsCount: 1
    +entryCount: 43
    +entryCommentCount: 201
    +postCount: 1
    +postCommentCount: 3
    +isAdult: false
    +customCss: null
    +lastActive: DateTime @1723220252 {#320
      date: 2024-08-09 18:17:32.0 +02:00
    }
    +markedForDeletionAt: null
    +tags: null
    +moderators: Doctrine\ORM\PersistentCollection {#284 …}
    +ownershipRequests: Doctrine\ORM\PersistentCollection {#280 …}
    +moderatorRequests: Doctrine\ORM\PersistentCollection {#269 …}
    +entries: Doctrine\ORM\PersistentCollection {#227 …}
    +posts: Doctrine\ORM\PersistentCollection {#185 …}
    +subscriptions: Doctrine\ORM\PersistentCollection {#247 …}
    +bans: Doctrine\ORM\PersistentCollection {#164 …}
    +reports: Doctrine\ORM\PersistentCollection {#150 …}
    +badges: Doctrine\ORM\PersistentCollection {#128 …}
    +logs: Doctrine\ORM\PersistentCollection {#118 …}
    +awards: Doctrine\ORM\PersistentCollection {#107 …}
    +categories: Doctrine\ORM\PersistentCollection {#94 …}
    -id: 5
    +apId: "electronics@discuss.tchncs.de"
    +apProfileId: "https://discuss.tchncs.de/c/electronics"
    +apPublicUrl: "https://discuss.tchncs.de/c/electronics"
    +apFollowersUrl: "https://discuss.tchncs.de/c/electronics/followers"
    +apInboxUrl: "https://discuss.tchncs.de/inbox"
    +apDomain: "discuss.tchncs.de"
    +apPreferredUsername: "electronics"
    +apDiscoverable: true
    +apManuallyApprovesFollowers: null
    +privateKey: null
    +publicKey: null
    +apFetchedAt: DateTime @1719675646 {#321
      date: 2024-06-29 17:40:46.0 +02:00
    }
    +apDeletedAt: null
    +apTimeoutAt: null
    +visibility: "visible             "
    +createdAt: DateTimeImmutable @1686642591 {#315
      date: 2023-06-13 09:49:51.0 +02:00
    }
  }
  +image: null
  +parent: Proxies\__CG__\App\Entity\EntryComment {#2451 …}
  +root: Proxies\__CG__\App\Entity\EntryComment {#2451 …}
  +body: """
    Yeah I have such a small, cheap Chinese one (T962) that I modified and flashed a nicer firmware on.\n
    \n
    I basically populated the bottom side (with more components) first after applying solder past with a stencil, then reflowed the board. After cooling down I applied the solder paste to the upper side (with the LED) by using a small needle on a syringe (because using a stencil was too weird since the board wasn’t laying flat) but since the pads are relatively large and not that many that worked fine. Then I placed the components on that side and simply run the reflow cycle again.\n
    \n
    I started with the bottom side because there are no heavy components. I expected heavy parts to just fall off on the second reflow cycle so I tried to avoid that.\n
    \n
    At the end I manually assembled the USB connector using a regular soldering iron and tons of flux gel.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 3
  +score: 0
  +lastActive: DateTime @1686836583 {#1769
    date: 2023-06-15 15:43:03.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@tbe@lemmy.world"
    "@teri@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#2356 …}
  +nested: Doctrine\ORM\PersistentCollection {#2355 …}
  +votes: Doctrine\ORM\PersistentCollection {#2428 …}
  +reports: Doctrine\ORM\PersistentCollection {#2436 …}
  +favourites: Doctrine\ORM\PersistentCollection {#2490 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2409 …}
  -id: 163
  -bodyTs: "'appli':31,45 'assembl':143 'avoid':136 'basic':21 'board':40,73 'bottom':24,111 'cheap':7 'chines':8 'compon':28,96,118 'connector':146 'cool':42 'cycl':105,131 'end':140 'expect':120 'fall':125 'fine':91 'firmwar':18 'first':29 'flash':15 'flat':77 'flux':155 'gel':156 'heavi':117,121 'iron':151 'larg':84 'lay':76 'led':55 'mani':88 'manual':142 'modifi':13 'needl':60 'nicer':17 'one':9 'pad':81 'part':122 'past':33,48 'place':94 'popul':22 'reflow':38,104,130 'regular':149 'relat':83 'run':102 'second':129 'side':25,52,99,112 'simpli':101 'sinc':71,79 'small':6,59 'solder':32,47,150 'start':108 'stencil':36,67 'syring':63 't962':10 'ton':153 'tri':134 'upper':51 'usb':145 'use':57,65,147 'wasn':74 'weird':70 'work':90 'yeah':1"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/213949"
  +editedAt: DateTimeImmutable @1686901717 {#1969
    date: 2023-06-16 09:48:37.0 +02:00
  }
  +createdAt: DateTimeImmutable @1686836583 {#1399
    date: 2023-06-15 15:43:03.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
3 DENIED edit 
App\Entity\EntryComment {#1378
  +user: Proxies\__CG__\App\Entity\User {#1882 …}
  +entry: App\Entity\Entry {#1856 …}
  +magazine: App\Entity\Magazine {#312
    +icon: Proxies\__CG__\App\Entity\Image {#293 …}
    +name: "electronics@discuss.tchncs.de"
    +title: "electronics"
    +description: """
      **Projects, pictures, industry discussions and news about electronic engineering & component-level electronic circuits.**\n
      \n
      Rules\n
      -----\n
      \n
      1: Be nice.\n
      \n
      2: Be on-topic (eg: *Electronic*, not *electrical*).\n
      \n
      3: No commercial stuff, buying, selling or valuations.\n
      \n
      4: No circuit design or repair, tools or component questions.\n
      \n
      5: No excessively promoting your own sites, social media, videos etc.\n
      \n
      ---\n
      \n
      *Ask questions in [discuss.tchncs.de/c/askelectronics](https://discuss.tchncs.de/c/askelectronics)*\n
      \n
      ---
      """
    +rules: null
    +subscriptionsCount: 1
    +entryCount: 43
    +entryCommentCount: 201
    +postCount: 1
    +postCommentCount: 3
    +isAdult: false
    +customCss: null
    +lastActive: DateTime @1723220252 {#320
      date: 2024-08-09 18:17:32.0 +02:00
    }
    +markedForDeletionAt: null
    +tags: null
    +moderators: Doctrine\ORM\PersistentCollection {#284 …}
    +ownershipRequests: Doctrine\ORM\PersistentCollection {#280 …}
    +moderatorRequests: Doctrine\ORM\PersistentCollection {#269 …}
    +entries: Doctrine\ORM\PersistentCollection {#227 …}
    +posts: Doctrine\ORM\PersistentCollection {#185 …}
    +subscriptions: Doctrine\ORM\PersistentCollection {#247 …}
    +bans: Doctrine\ORM\PersistentCollection {#164 …}
    +reports: Doctrine\ORM\PersistentCollection {#150 …}
    +badges: Doctrine\ORM\PersistentCollection {#128 …}
    +logs: Doctrine\ORM\PersistentCollection {#118 …}
    +awards: Doctrine\ORM\PersistentCollection {#107 …}
    +categories: Doctrine\ORM\PersistentCollection {#94 …}
    -id: 5
    +apId: "electronics@discuss.tchncs.de"
    +apProfileId: "https://discuss.tchncs.de/c/electronics"
    +apPublicUrl: "https://discuss.tchncs.de/c/electronics"
    +apFollowersUrl: "https://discuss.tchncs.de/c/electronics/followers"
    +apInboxUrl: "https://discuss.tchncs.de/inbox"
    +apDomain: "discuss.tchncs.de"
    +apPreferredUsername: "electronics"
    +apDiscoverable: true
    +apManuallyApprovesFollowers: null
    +privateKey: null
    +publicKey: null
    +apFetchedAt: DateTime @1719675646 {#321
      date: 2024-06-29 17:40:46.0 +02:00
    }
    +apDeletedAt: null
    +apTimeoutAt: null
    +visibility: "visible             "
    +createdAt: DateTimeImmutable @1686642591 {#315
      date: 2023-06-13 09:49:51.0 +02:00
    }
  }
  +image: null
  +parent: Proxies\__CG__\App\Entity\EntryComment {#2451 …}
  +root: Proxies\__CG__\App\Entity\EntryComment {#2451 …}
  +body: """
    Yeah I have such a small, cheap Chinese one (T962) that I modified and flashed a nicer firmware on.\n
    \n
    I basically populated the bottom side (with more components) first after applying solder past with a stencil, then reflowed the board. After cooling down I applied the solder paste to the upper side (with the LED) by using a small needle on a syringe (because using a stencil was too weird since the board wasn’t laying flat) but since the pads are relatively large and not that many that worked fine. Then I placed the components on that side and simply run the reflow cycle again.\n
    \n
    I started with the bottom side because there are no heavy components. I expected heavy parts to just fall off on the second reflow cycle so I tried to avoid that.\n
    \n
    At the end I manually assembled the USB connector using a regular soldering iron and tons of flux gel.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 3
  +score: 0
  +lastActive: DateTime @1686836583 {#1769
    date: 2023-06-15 15:43:03.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@tbe@lemmy.world"
    "@teri@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#2356 …}
  +nested: Doctrine\ORM\PersistentCollection {#2355 …}
  +votes: Doctrine\ORM\PersistentCollection {#2428 …}
  +reports: Doctrine\ORM\PersistentCollection {#2436 …}
  +favourites: Doctrine\ORM\PersistentCollection {#2490 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2409 …}
  -id: 163
  -bodyTs: "'appli':31,45 'assembl':143 'avoid':136 'basic':21 'board':40,73 'bottom':24,111 'cheap':7 'chines':8 'compon':28,96,118 'connector':146 'cool':42 'cycl':105,131 'end':140 'expect':120 'fall':125 'fine':91 'firmwar':18 'first':29 'flash':15 'flat':77 'flux':155 'gel':156 'heavi':117,121 'iron':151 'larg':84 'lay':76 'led':55 'mani':88 'manual':142 'modifi':13 'needl':60 'nicer':17 'one':9 'pad':81 'part':122 'past':33,48 'place':94 'popul':22 'reflow':38,104,130 'regular':149 'relat':83 'run':102 'second':129 'side':25,52,99,112 'simpli':101 'sinc':71,79 'small':6,59 'solder':32,47,150 'start':108 'stencil':36,67 'syring':63 't962':10 'ton':153 'tri':134 'upper':51 'usb':145 'use':57,65,147 'wasn':74 'weird':70 'work':90 'yeah':1"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/213949"
  +editedAt: DateTimeImmutable @1686901717 {#1969
    date: 2023-06-16 09:48:37.0 +02:00
  }
  +createdAt: DateTimeImmutable @1686836583 {#1399
    date: 2023-06-15 15:43:03.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
4 DENIED moderate 
App\Entity\EntryComment {#1378
  +user: Proxies\__CG__\App\Entity\User {#1882 …}
  +entry: App\Entity\Entry {#1856 …}
  +magazine: App\Entity\Magazine {#312
    +icon: Proxies\__CG__\App\Entity\Image {#293 …}
    +name: "electronics@discuss.tchncs.de"
    +title: "electronics"
    +description: """
      **Projects, pictures, industry discussions and news about electronic engineering & component-level electronic circuits.**\n
      \n
      Rules\n
      -----\n
      \n
      1: Be nice.\n
      \n
      2: Be on-topic (eg: *Electronic*, not *electrical*).\n
      \n
      3: No commercial stuff, buying, selling or valuations.\n
      \n
      4: No circuit design or repair, tools or component questions.\n
      \n
      5: No excessively promoting your own sites, social media, videos etc.\n
      \n
      ---\n
      \n
      *Ask questions in [discuss.tchncs.de/c/askelectronics](https://discuss.tchncs.de/c/askelectronics)*\n
      \n
      ---
      """
    +rules: null
    +subscriptionsCount: 1
    +entryCount: 43
    +entryCommentCount: 201
    +postCount: 1
    +postCommentCount: 3
    +isAdult: false
    +customCss: null
    +lastActive: DateTime @1723220252 {#320
      date: 2024-08-09 18:17:32.0 +02:00
    }
    +markedForDeletionAt: null
    +tags: null
    +moderators: Doctrine\ORM\PersistentCollection {#284 …}
    +ownershipRequests: Doctrine\ORM\PersistentCollection {#280 …}
    +moderatorRequests: Doctrine\ORM\PersistentCollection {#269 …}
    +entries: Doctrine\ORM\PersistentCollection {#227 …}
    +posts: Doctrine\ORM\PersistentCollection {#185 …}
    +subscriptions: Doctrine\ORM\PersistentCollection {#247 …}
    +bans: Doctrine\ORM\PersistentCollection {#164 …}
    +reports: Doctrine\ORM\PersistentCollection {#150 …}
    +badges: Doctrine\ORM\PersistentCollection {#128 …}
    +logs: Doctrine\ORM\PersistentCollection {#118 …}
    +awards: Doctrine\ORM\PersistentCollection {#107 …}
    +categories: Doctrine\ORM\PersistentCollection {#94 …}
    -id: 5
    +apId: "electronics@discuss.tchncs.de"
    +apProfileId: "https://discuss.tchncs.de/c/electronics"
    +apPublicUrl: "https://discuss.tchncs.de/c/electronics"
    +apFollowersUrl: "https://discuss.tchncs.de/c/electronics/followers"
    +apInboxUrl: "https://discuss.tchncs.de/inbox"
    +apDomain: "discuss.tchncs.de"
    +apPreferredUsername: "electronics"
    +apDiscoverable: true
    +apManuallyApprovesFollowers: null
    +privateKey: null
    +publicKey: null
    +apFetchedAt: DateTime @1719675646 {#321
      date: 2024-06-29 17:40:46.0 +02:00
    }
    +apDeletedAt: null
    +apTimeoutAt: null
    +visibility: "visible             "
    +createdAt: DateTimeImmutable @1686642591 {#315
      date: 2023-06-13 09:49:51.0 +02:00
    }
  }
  +image: null
  +parent: Proxies\__CG__\App\Entity\EntryComment {#2451 …}
  +root: Proxies\__CG__\App\Entity\EntryComment {#2451 …}
  +body: """
    Yeah I have such a small, cheap Chinese one (T962) that I modified and flashed a nicer firmware on.\n
    \n
    I basically populated the bottom side (with more components) first after applying solder past with a stencil, then reflowed the board. After cooling down I applied the solder paste to the upper side (with the LED) by using a small needle on a syringe (because using a stencil was too weird since the board wasn’t laying flat) but since the pads are relatively large and not that many that worked fine. Then I placed the components on that side and simply run the reflow cycle again.\n
    \n
    I started with the bottom side because there are no heavy components. I expected heavy parts to just fall off on the second reflow cycle so I tried to avoid that.\n
    \n
    At the end I manually assembled the USB connector using a regular soldering iron and tons of flux gel.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 3
  +score: 0
  +lastActive: DateTime @1686836583 {#1769
    date: 2023-06-15 15:43:03.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@tbe@lemmy.world"
    "@teri@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#2356 …}
  +nested: Doctrine\ORM\PersistentCollection {#2355 …}
  +votes: Doctrine\ORM\PersistentCollection {#2428 …}
  +reports: Doctrine\ORM\PersistentCollection {#2436 …}
  +favourites: Doctrine\ORM\PersistentCollection {#2490 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2409 …}
  -id: 163
  -bodyTs: "'appli':31,45 'assembl':143 'avoid':136 'basic':21 'board':40,73 'bottom':24,111 'cheap':7 'chines':8 'compon':28,96,118 'connector':146 'cool':42 'cycl':105,131 'end':140 'expect':120 'fall':125 'fine':91 'firmwar':18 'first':29 'flash':15 'flat':77 'flux':155 'gel':156 'heavi':117,121 'iron':151 'larg':84 'lay':76 'led':55 'mani':88 'manual':142 'modifi':13 'needl':60 'nicer':17 'one':9 'pad':81 'part':122 'past':33,48 'place':94 'popul':22 'reflow':38,104,130 'regular':149 'relat':83 'run':102 'second':129 'side':25,52,99,112 'simpli':101 'sinc':71,79 'small':6,59 'solder':32,47,150 'start':108 'stencil':36,67 'syring':63 't962':10 'ton':153 'tri':134 'upper':51 'usb':145 'use':57,65,147 'wasn':74 'weird':70 'work':90 'yeah':1"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/213949"
  +editedAt: DateTimeImmutable @1686901717 {#1969
    date: 2023-06-16 09:48:37.0 +02:00
  }
  +createdAt: DateTimeImmutable @1686836583 {#1399
    date: 2023-06-15 15:43:03.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
5 DENIED edit 
App\Entity\Magazine {#312
  +icon: Proxies\__CG__\App\Entity\Image {#293 …}
  +name: "electronics@discuss.tchncs.de"
  +title: "electronics"
  +description: """
    **Projects, pictures, industry discussions and news about electronic engineering & component-level electronic circuits.**\n
    \n
    Rules\n
    -----\n
    \n
    1: Be nice.\n
    \n
    2: Be on-topic (eg: *Electronic*, not *electrical*).\n
    \n
    3: No commercial stuff, buying, selling or valuations.\n
    \n
    4: No circuit design or repair, tools or component questions.\n
    \n
    5: No excessively promoting your own sites, social media, videos etc.\n
    \n
    ---\n
    \n
    *Ask questions in [discuss.tchncs.de/c/askelectronics](https://discuss.tchncs.de/c/askelectronics)*\n
    \n
    ---
    """
  +rules: null
  +subscriptionsCount: 1
  +entryCount: 43
  +entryCommentCount: 201
  +postCount: 1
  +postCommentCount: 3
  +isAdult: false
  +customCss: null
  +lastActive: DateTime @1723220252 {#320
    date: 2024-08-09 18:17:32.0 +02:00
  }
  +markedForDeletionAt: null
  +tags: null
  +moderators: Doctrine\ORM\PersistentCollection {#284 …}
  +ownershipRequests: Doctrine\ORM\PersistentCollection {#280 …}
  +moderatorRequests: Doctrine\ORM\PersistentCollection {#269 …}
  +entries: Doctrine\ORM\PersistentCollection {#227 …}
  +posts: Doctrine\ORM\PersistentCollection {#185 …}
  +subscriptions: Doctrine\ORM\PersistentCollection {#247 …}
  +bans: Doctrine\ORM\PersistentCollection {#164 …}
  +reports: Doctrine\ORM\PersistentCollection {#150 …}
  +badges: Doctrine\ORM\PersistentCollection {#128 …}
  +logs: Doctrine\ORM\PersistentCollection {#118 …}
  +awards: Doctrine\ORM\PersistentCollection {#107 …}
  +categories: Doctrine\ORM\PersistentCollection {#94 …}
  -id: 5
  +apId: "electronics@discuss.tchncs.de"
  +apProfileId: "https://discuss.tchncs.de/c/electronics"
  +apPublicUrl: "https://discuss.tchncs.de/c/electronics"
  +apFollowersUrl: "https://discuss.tchncs.de/c/electronics/followers"
  +apInboxUrl: "https://discuss.tchncs.de/inbox"
  +apDomain: "discuss.tchncs.de"
  +apPreferredUsername: "electronics"
  +apDiscoverable: true
  +apManuallyApprovesFollowers: null
  +privateKey: null
  +publicKey: null
  +apFetchedAt: DateTime @1719675646 {#321
    date: 2024-06-29 17:40:46.0 +02:00
  }
  +apDeletedAt: null
  +apTimeoutAt: null
  +visibility: "visible             "
  +createdAt: DateTimeImmutable @1686642591 {#315
    date: 2023-06-13 09:49:51.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS DENIED 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details