GET https://kbin.spritesserver.nl/index.php/m/askelectronics@discuss.tchncs.de/t/950/What-tip-should-I-be-using-to-solder-wires-together/comment/10165/votes/down

Response
200 OK
IP
216.73.216.88
Profiled on
Token
42a028

Security

Token

There is no security token.

Firewall

main Name
Security enabled
Stateless

Configuration

Key Value
provider security.user.provider.concrete.app_user_provider
context main
entry_point App\Security\KbinAuthenticator
user_checker App\Security\UserChecker
access_denied_handler (none)
access_denied_url (none)
authenticators 
[
  "two_factor"
  "remember_me"
  "App\Security\KbinAuthenticator"
  "App\Security\FacebookAuthenticator"
  "App\Security\GoogleAuthenticator"
  "App\Security\GithubAuthenticator"
  "App\Security\KeycloakAuthenticator"
]

Listeners

Listener Duration Response 
Symfony\Component\Security\Http\Firewall\ChannelListener {#723
  -map: Symfony\Component\Security\Http\AccessMap {#722 …}
  -logger: Monolog\Logger {#783 …}
  -httpPort: 80
  -httpsPort: 443
}
 0.00 ms (none) 
Symfony\Component\Security\Http\Firewall\ContextListener {#706
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\TokenStorage {#1017 …}
  -sessionKey: "_security_main"
  -logger: Monolog\Logger {#783 …}
  -userProviders: Symfony\Component\DependencyInjection\Argument\RewindableGenerator {#705 …}
  -dispatcher: Symfony\Component\EventDispatcher\Debug\TraceableEventDispatcher {#747 …}
  -registered: false
  -trustResolver: Scheb\TwoFactorBundle\Security\Authentication\AuthenticationTrustResolver {#780 …}
  -sessionTrackerEnabler: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage::enableUsageTracking(): void {#703 …}
}
 10.06 ms (none) 
Symfony\Component\Security\Http\Firewall\AuthenticatorManagerListener {#584
  -authenticatorManager: Symfony\Component\Security\Http\Authentication\AuthenticatorManager {#595 …}
}
 0.00 ms (none) 
Scheb\TwoFactorBundle\Security\Http\Firewall\TwoFactorAccessListener {#582
  -twoFactorFirewallConfig: Scheb\TwoFactorBundle\Security\TwoFactor\TwoFactorFirewallConfig {#842 …}
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …}
  -twoFactorAccessDecider: Scheb\TwoFactorBundle\Security\Authorization\TwoFactorAccessDecider {#581 …}
}
 0.10 ms (none) 
Symfony\Component\Security\Http\Firewall\AccessListener {#579
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …}
  -accessDecisionManager: Symfony\Component\Security\Core\Authorization\TraceableAccessDecisionManager {#937 …}
  -map: Symfony\Component\Security\Http\AccessMap {#722 …}
}
 0.00 ms (none) 
Symfony\Component\Security\Http\Firewall\LogoutListener {#786
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …}
  -options: [
    "csrf_parameter" => "_csrf_token"
    "csrf_token_id" => "logout"
    "logout_path" => "app_logout"
  ]
  -httpUtils: Symfony\Component\Security\Http\HttpUtils {#841 …}
  -csrfTokenManager: Symfony\Component\Security\Csrf\CsrfTokenManager {#1015 …}
  -eventDispatcher: Symfony\Component\EventDispatcher\Debug\TraceableEventDispatcher {#747 …}
}
 0.00 ms (none)

Authenticators

No authenticators have been recorded. Check previous profiles on your authentication endpoint.

Access Decision

affirmative Strategy
# Voter class
1 
"Symfony\Component\Security\Core\Authorization\Voter\AuthenticatedVoter"
2 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
3 
"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
4 
"Symfony\Component\Security\Core\Authorization\Voter\ExpressionVoter"
5 
"App\Security\Voter\EntryCommentVoter"
6 
"App\Security\Voter\EntryVoter"
7 
"App\Security\Voter\MagazineVoter"
8 
"App\Security\Voter\MessageThreadVoter"
9 
"App\Security\Voter\MessageVoter"
10 
"App\Security\Voter\NotificationVoter"
11 
"App\Security\Voter\OAuth2UserConsentVoter"
12 
"App\Security\Voter\PostCommentVoter"
13 
"App\Security\Voter\PostVoter"
14 
"App\Security\Voter\UserVoter"

Access decision log

# Result Attributes Object
1 DENIED ROLE_USER 
null
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
2 DENIED moderate 
App\Entity\EntryComment {#1369
  +user: Proxies\__CG__\App\Entity\User {#1370 …}
  +entry: App\Entity\Entry {#1856 …}
  +magazine: App\Entity\Magazine {#312
    +icon: Proxies\__CG__\App\Entity\Image {#293 …}
    +name: "askelectronics@discuss.tchncs.de"
    +title: "askelectronics"
    +description: """
      **For questions about component-level electronic circuits, tools and equipment.**\n
      \n
      Rules\n
      -----\n
      \n
      1: Be nice.\n
      \n
      2: Be on-topic (eg: *Electronic*, not *electrical*).\n
      \n
      3: No commercial stuff, buying, selling or valuations.\n
      \n
      4: Be safe.\n
      \n
      ---
      """
    +rules: null
    +subscriptionsCount: 1
    +entryCount: 154
    +entryCommentCount: 1230
    +postCount: 1
    +postCommentCount: 4
    +isAdult: false
    +customCss: null
    +lastActive: DateTime @1729413608 {#320
      date: 2024-10-20 10:40:08.0 +02:00
    }
    +markedForDeletionAt: null
    +tags: null
    +moderators: Doctrine\ORM\PersistentCollection {#284 …}
    +ownershipRequests: Doctrine\ORM\PersistentCollection {#280 …}
    +moderatorRequests: Doctrine\ORM\PersistentCollection {#269 …}
    +entries: Doctrine\ORM\PersistentCollection {#227 …}
    +posts: Doctrine\ORM\PersistentCollection {#185 …}
    +subscriptions: Doctrine\ORM\PersistentCollection {#247 …}
    +bans: Doctrine\ORM\PersistentCollection {#164 …}
    +reports: Doctrine\ORM\PersistentCollection {#150 …}
    +badges: Doctrine\ORM\PersistentCollection {#128 …}
    +logs: Doctrine\ORM\PersistentCollection {#118 …}
    +awards: Doctrine\ORM\PersistentCollection {#107 …}
    +categories: Doctrine\ORM\PersistentCollection {#94 …}
    -id: 11
    +apId: "askelectronics@discuss.tchncs.de"
    +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
    +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
    +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
    +apInboxUrl: "https://discuss.tchncs.de/inbox"
    +apDomain: "discuss.tchncs.de"
    +apPreferredUsername: "askelectronics"
    +apDiscoverable: true
    +apManuallyApprovesFollowers: null
    +privateKey: null
    +publicKey: null
    +apFetchedAt: DateTime @1727247714 {#321
      date: 2024-09-25 09:01:54.0 +02:00
    }
    +apDeletedAt: null
    +apTimeoutAt: null
    +visibility: "visible             "
    +createdAt: DateTimeImmutable @1687144409 {#315
      date: 2023-06-19 05:13:29.0 +02:00
    }
  }
  +image: null
  +parent: null
  +root: null
  +body: """
    Just about any soldering iron should work. Chisel tips are better than round tips for most work. I really like J tips as well, they’ve got a range of usable surface sizes without having to change tip just by turning the iron around.\n
    \n
    Put a piece of heat shrink tubing on one wire.  \n
    Strip the ends, and form a [Western Union splice](https://en.wikipedia.org/wiki/Western_Union_splice) in the wires to hold them.  \n
    Set the iron to 350°C, and let it heat up. If your iron doesn’t have temperature control, it’s cheap crap and should probably just be thrown in the trash since it’ll tend to over-heat and lift pads when soldering PCBs. Continue for now, that doesn’t matter as much for soldering wires.  \n
    Then apply a tiny bit of solder to the tip of the iron so that it can make good contact, apply flux to the bit where the wires join (do NOT skip flux), touch the solder to the wires, and then touch the iron to the other side of the wires. The solder should quickly melt & flow into the joint.  \n
    Remove the solder, then remove the iron.  \n
    Let the joint cool, then slide the heat shrink up over the joint and shrink it with a heat gun.\n
    \n
    Crimp connectors tend to be stronger and more vibration-proof than solder, but sometimes space constraints mean that soldered splices are necessary. Also crimpers are expensive, for many wire-to-wire crimp families the official crimpers are several hundred dollars.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 2
  +score: 0
  +lastActive: DateTime @1689806557 {#1769
    date: 2023-07-20 00:42:37.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@CorrodedCranium@lemmy.fmhy.ml"
  ]
  +children: Doctrine\ORM\PersistentCollection {#1371 …}
  +nested: Doctrine\ORM\PersistentCollection {#1379 …}
  +votes: Doctrine\ORM\PersistentCollection {#2446 …}
  +reports: Doctrine\ORM\PersistentCollection {#1891 …}
  +favourites: Doctrine\ORM\PersistentCollection {#2409 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2358 …}
  -id: 10165
  -bodyTs: "'/wiki/western_union_splice)':66 '350':77 'also':241 'appli':132,151 'around':44 'better':11 'bit':135,155 'c':78 'chang':37 'cheap':94 'chisel':8 'connector':219 'constraint':234 'contact':150 'continu':119 'control':91 'cool':201 'crap':95 'crimp':218,251 'crimper':242,255 'doesn':87,123 'dollar':259 'en.wikipedia.org':65 'en.wikipedia.org/wiki/western_union_splice)':64 'end':57 'expens':244 'famili':252 'flow':187 'flux':152,163 'form':59 'good':149 'got':27 'gun':217 'heat':49,82,112,205,216 'hold':71 'hundr':258 'iron':5,43,75,86,143,174,197 'j':21 'join':159 'joint':190,200,210 'let':80,198 'lift':114 'like':20 'll':107 'make':148 'mani':246 'matter':125 'mean':235 'melt':186 'much':127 'necessari':240 'offici':254 'one':53 'over-heat':110 'pad':115 'pcbs':118 'piec':47 'probabl':98 'proof':228 'put':45 'quick':185 'rang':29 'realli':19 'remov':191,195 'round':13 'set':73 'sever':257 'shrink':50,206,212 'side':178 'sinc':105 'size':33 'skip':162 'slide':203 'solder':4,117,129,137,166,183,193,230,237 'sometim':232 'space':233 'splice':63,238 'strip':55 'stronger':223 'surfac':32 'temperatur':90 'tend':108,220 'thrown':101 'tini':134 'tip':9,14,22,38,140 'touch':164,172 'trash':104 'tube':51 'turn':41 'union':62 'usabl':31 've':26 'vibrat':227 'vibration-proof':226 'well':24 'western':61 'wire':54,69,130,158,169,181,248,250 'wire-to-wir':247 'without':34 'work':7,17"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/880346"
  +editedAt: DateTimeImmutable @1689042668 {#1945
    date: 2023-07-11 04:31:08.0 +02:00
  }
  +createdAt: DateTimeImmutable @1689042534 {#1368
    date: 2023-07-11 04:28:54.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
3 DENIED edit 
App\Entity\EntryComment {#1369
  +user: Proxies\__CG__\App\Entity\User {#1370 …}
  +entry: App\Entity\Entry {#1856 …}
  +magazine: App\Entity\Magazine {#312
    +icon: Proxies\__CG__\App\Entity\Image {#293 …}
    +name: "askelectronics@discuss.tchncs.de"
    +title: "askelectronics"
    +description: """
      **For questions about component-level electronic circuits, tools and equipment.**\n
      \n
      Rules\n
      -----\n
      \n
      1: Be nice.\n
      \n
      2: Be on-topic (eg: *Electronic*, not *electrical*).\n
      \n
      3: No commercial stuff, buying, selling or valuations.\n
      \n
      4: Be safe.\n
      \n
      ---
      """
    +rules: null
    +subscriptionsCount: 1
    +entryCount: 154
    +entryCommentCount: 1230
    +postCount: 1
    +postCommentCount: 4
    +isAdult: false
    +customCss: null
    +lastActive: DateTime @1729413608 {#320
      date: 2024-10-20 10:40:08.0 +02:00
    }
    +markedForDeletionAt: null
    +tags: null
    +moderators: Doctrine\ORM\PersistentCollection {#284 …}
    +ownershipRequests: Doctrine\ORM\PersistentCollection {#280 …}
    +moderatorRequests: Doctrine\ORM\PersistentCollection {#269 …}
    +entries: Doctrine\ORM\PersistentCollection {#227 …}
    +posts: Doctrine\ORM\PersistentCollection {#185 …}
    +subscriptions: Doctrine\ORM\PersistentCollection {#247 …}
    +bans: Doctrine\ORM\PersistentCollection {#164 …}
    +reports: Doctrine\ORM\PersistentCollection {#150 …}
    +badges: Doctrine\ORM\PersistentCollection {#128 …}
    +logs: Doctrine\ORM\PersistentCollection {#118 …}
    +awards: Doctrine\ORM\PersistentCollection {#107 …}
    +categories: Doctrine\ORM\PersistentCollection {#94 …}
    -id: 11
    +apId: "askelectronics@discuss.tchncs.de"
    +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
    +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
    +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
    +apInboxUrl: "https://discuss.tchncs.de/inbox"
    +apDomain: "discuss.tchncs.de"
    +apPreferredUsername: "askelectronics"
    +apDiscoverable: true
    +apManuallyApprovesFollowers: null
    +privateKey: null
    +publicKey: null
    +apFetchedAt: DateTime @1727247714 {#321
      date: 2024-09-25 09:01:54.0 +02:00
    }
    +apDeletedAt: null
    +apTimeoutAt: null
    +visibility: "visible             "
    +createdAt: DateTimeImmutable @1687144409 {#315
      date: 2023-06-19 05:13:29.0 +02:00
    }
  }
  +image: null
  +parent: null
  +root: null
  +body: """
    Just about any soldering iron should work. Chisel tips are better than round tips for most work. I really like J tips as well, they’ve got a range of usable surface sizes without having to change tip just by turning the iron around.\n
    \n
    Put a piece of heat shrink tubing on one wire.  \n
    Strip the ends, and form a [Western Union splice](https://en.wikipedia.org/wiki/Western_Union_splice) in the wires to hold them.  \n
    Set the iron to 350°C, and let it heat up. If your iron doesn’t have temperature control, it’s cheap crap and should probably just be thrown in the trash since it’ll tend to over-heat and lift pads when soldering PCBs. Continue for now, that doesn’t matter as much for soldering wires.  \n
    Then apply a tiny bit of solder to the tip of the iron so that it can make good contact, apply flux to the bit where the wires join (do NOT skip flux), touch the solder to the wires, and then touch the iron to the other side of the wires. The solder should quickly melt & flow into the joint.  \n
    Remove the solder, then remove the iron.  \n
    Let the joint cool, then slide the heat shrink up over the joint and shrink it with a heat gun.\n
    \n
    Crimp connectors tend to be stronger and more vibration-proof than solder, but sometimes space constraints mean that soldered splices are necessary. Also crimpers are expensive, for many wire-to-wire crimp families the official crimpers are several hundred dollars.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 2
  +score: 0
  +lastActive: DateTime @1689806557 {#1769
    date: 2023-07-20 00:42:37.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@CorrodedCranium@lemmy.fmhy.ml"
  ]
  +children: Doctrine\ORM\PersistentCollection {#1371 …}
  +nested: Doctrine\ORM\PersistentCollection {#1379 …}
  +votes: Doctrine\ORM\PersistentCollection {#2446 …}
  +reports: Doctrine\ORM\PersistentCollection {#1891 …}
  +favourites: Doctrine\ORM\PersistentCollection {#2409 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2358 …}
  -id: 10165
  -bodyTs: "'/wiki/western_union_splice)':66 '350':77 'also':241 'appli':132,151 'around':44 'better':11 'bit':135,155 'c':78 'chang':37 'cheap':94 'chisel':8 'connector':219 'constraint':234 'contact':150 'continu':119 'control':91 'cool':201 'crap':95 'crimp':218,251 'crimper':242,255 'doesn':87,123 'dollar':259 'en.wikipedia.org':65 'en.wikipedia.org/wiki/western_union_splice)':64 'end':57 'expens':244 'famili':252 'flow':187 'flux':152,163 'form':59 'good':149 'got':27 'gun':217 'heat':49,82,112,205,216 'hold':71 'hundr':258 'iron':5,43,75,86,143,174,197 'j':21 'join':159 'joint':190,200,210 'let':80,198 'lift':114 'like':20 'll':107 'make':148 'mani':246 'matter':125 'mean':235 'melt':186 'much':127 'necessari':240 'offici':254 'one':53 'over-heat':110 'pad':115 'pcbs':118 'piec':47 'probabl':98 'proof':228 'put':45 'quick':185 'rang':29 'realli':19 'remov':191,195 'round':13 'set':73 'sever':257 'shrink':50,206,212 'side':178 'sinc':105 'size':33 'skip':162 'slide':203 'solder':4,117,129,137,166,183,193,230,237 'sometim':232 'space':233 'splice':63,238 'strip':55 'stronger':223 'surfac':32 'temperatur':90 'tend':108,220 'thrown':101 'tini':134 'tip':9,14,22,38,140 'touch':164,172 'trash':104 'tube':51 'turn':41 'union':62 'usabl':31 've':26 'vibrat':227 'vibration-proof':226 'well':24 'western':61 'wire':54,69,130,158,169,181,248,250 'wire-to-wir':247 'without':34 'work':7,17"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/880346"
  +editedAt: DateTimeImmutable @1689042668 {#1945
    date: 2023-07-11 04:31:08.0 +02:00
  }
  +createdAt: DateTimeImmutable @1689042534 {#1368
    date: 2023-07-11 04:28:54.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
4 DENIED moderate 
App\Entity\EntryComment {#1369
  +user: Proxies\__CG__\App\Entity\User {#1370 …}
  +entry: App\Entity\Entry {#1856 …}
  +magazine: App\Entity\Magazine {#312
    +icon: Proxies\__CG__\App\Entity\Image {#293 …}
    +name: "askelectronics@discuss.tchncs.de"
    +title: "askelectronics"
    +description: """
      **For questions about component-level electronic circuits, tools and equipment.**\n
      \n
      Rules\n
      -----\n
      \n
      1: Be nice.\n
      \n
      2: Be on-topic (eg: *Electronic*, not *electrical*).\n
      \n
      3: No commercial stuff, buying, selling or valuations.\n
      \n
      4: Be safe.\n
      \n
      ---
      """
    +rules: null
    +subscriptionsCount: 1
    +entryCount: 154
    +entryCommentCount: 1230
    +postCount: 1
    +postCommentCount: 4
    +isAdult: false
    +customCss: null
    +lastActive: DateTime @1729413608 {#320
      date: 2024-10-20 10:40:08.0 +02:00
    }
    +markedForDeletionAt: null
    +tags: null
    +moderators: Doctrine\ORM\PersistentCollection {#284 …}
    +ownershipRequests: Doctrine\ORM\PersistentCollection {#280 …}
    +moderatorRequests: Doctrine\ORM\PersistentCollection {#269 …}
    +entries: Doctrine\ORM\PersistentCollection {#227 …}
    +posts: Doctrine\ORM\PersistentCollection {#185 …}
    +subscriptions: Doctrine\ORM\PersistentCollection {#247 …}
    +bans: Doctrine\ORM\PersistentCollection {#164 …}
    +reports: Doctrine\ORM\PersistentCollection {#150 …}
    +badges: Doctrine\ORM\PersistentCollection {#128 …}
    +logs: Doctrine\ORM\PersistentCollection {#118 …}
    +awards: Doctrine\ORM\PersistentCollection {#107 …}
    +categories: Doctrine\ORM\PersistentCollection {#94 …}
    -id: 11
    +apId: "askelectronics@discuss.tchncs.de"
    +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
    +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
    +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
    +apInboxUrl: "https://discuss.tchncs.de/inbox"
    +apDomain: "discuss.tchncs.de"
    +apPreferredUsername: "askelectronics"
    +apDiscoverable: true
    +apManuallyApprovesFollowers: null
    +privateKey: null
    +publicKey: null
    +apFetchedAt: DateTime @1727247714 {#321
      date: 2024-09-25 09:01:54.0 +02:00
    }
    +apDeletedAt: null
    +apTimeoutAt: null
    +visibility: "visible             "
    +createdAt: DateTimeImmutable @1687144409 {#315
      date: 2023-06-19 05:13:29.0 +02:00
    }
  }
  +image: null
  +parent: null
  +root: null
  +body: """
    Just about any soldering iron should work. Chisel tips are better than round tips for most work. I really like J tips as well, they’ve got a range of usable surface sizes without having to change tip just by turning the iron around.\n
    \n
    Put a piece of heat shrink tubing on one wire.  \n
    Strip the ends, and form a [Western Union splice](https://en.wikipedia.org/wiki/Western_Union_splice) in the wires to hold them.  \n
    Set the iron to 350°C, and let it heat up. If your iron doesn’t have temperature control, it’s cheap crap and should probably just be thrown in the trash since it’ll tend to over-heat and lift pads when soldering PCBs. Continue for now, that doesn’t matter as much for soldering wires.  \n
    Then apply a tiny bit of solder to the tip of the iron so that it can make good contact, apply flux to the bit where the wires join (do NOT skip flux), touch the solder to the wires, and then touch the iron to the other side of the wires. The solder should quickly melt & flow into the joint.  \n
    Remove the solder, then remove the iron.  \n
    Let the joint cool, then slide the heat shrink up over the joint and shrink it with a heat gun.\n
    \n
    Crimp connectors tend to be stronger and more vibration-proof than solder, but sometimes space constraints mean that soldered splices are necessary. Also crimpers are expensive, for many wire-to-wire crimp families the official crimpers are several hundred dollars.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 2
  +score: 0
  +lastActive: DateTime @1689806557 {#1769
    date: 2023-07-20 00:42:37.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@CorrodedCranium@lemmy.fmhy.ml"
  ]
  +children: Doctrine\ORM\PersistentCollection {#1371 …}
  +nested: Doctrine\ORM\PersistentCollection {#1379 …}
  +votes: Doctrine\ORM\PersistentCollection {#2446 …}
  +reports: Doctrine\ORM\PersistentCollection {#1891 …}
  +favourites: Doctrine\ORM\PersistentCollection {#2409 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2358 …}
  -id: 10165
  -bodyTs: "'/wiki/western_union_splice)':66 '350':77 'also':241 'appli':132,151 'around':44 'better':11 'bit':135,155 'c':78 'chang':37 'cheap':94 'chisel':8 'connector':219 'constraint':234 'contact':150 'continu':119 'control':91 'cool':201 'crap':95 'crimp':218,251 'crimper':242,255 'doesn':87,123 'dollar':259 'en.wikipedia.org':65 'en.wikipedia.org/wiki/western_union_splice)':64 'end':57 'expens':244 'famili':252 'flow':187 'flux':152,163 'form':59 'good':149 'got':27 'gun':217 'heat':49,82,112,205,216 'hold':71 'hundr':258 'iron':5,43,75,86,143,174,197 'j':21 'join':159 'joint':190,200,210 'let':80,198 'lift':114 'like':20 'll':107 'make':148 'mani':246 'matter':125 'mean':235 'melt':186 'much':127 'necessari':240 'offici':254 'one':53 'over-heat':110 'pad':115 'pcbs':118 'piec':47 'probabl':98 'proof':228 'put':45 'quick':185 'rang':29 'realli':19 'remov':191,195 'round':13 'set':73 'sever':257 'shrink':50,206,212 'side':178 'sinc':105 'size':33 'skip':162 'slide':203 'solder':4,117,129,137,166,183,193,230,237 'sometim':232 'space':233 'splice':63,238 'strip':55 'stronger':223 'surfac':32 'temperatur':90 'tend':108,220 'thrown':101 'tini':134 'tip':9,14,22,38,140 'touch':164,172 'trash':104 'tube':51 'turn':41 'union':62 'usabl':31 've':26 'vibrat':227 'vibration-proof':226 'well':24 'western':61 'wire':54,69,130,158,169,181,248,250 'wire-to-wir':247 'without':34 'work':7,17"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/880346"
  +editedAt: DateTimeImmutable @1689042668 {#1945
    date: 2023-07-11 04:31:08.0 +02:00
  }
  +createdAt: DateTimeImmutable @1689042534 {#1368
    date: 2023-07-11 04:28:54.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
5 DENIED edit 
App\Entity\Magazine {#312
  +icon: Proxies\__CG__\App\Entity\Image {#293 …}
  +name: "askelectronics@discuss.tchncs.de"
  +title: "askelectronics"
  +description: """
    **For questions about component-level electronic circuits, tools and equipment.**\n
    \n
    Rules\n
    -----\n
    \n
    1: Be nice.\n
    \n
    2: Be on-topic (eg: *Electronic*, not *electrical*).\n
    \n
    3: No commercial stuff, buying, selling or valuations.\n
    \n
    4: Be safe.\n
    \n
    ---
    """
  +rules: null
  +subscriptionsCount: 1
  +entryCount: 154
  +entryCommentCount: 1230
  +postCount: 1
  +postCommentCount: 4
  +isAdult: false
  +customCss: null
  +lastActive: DateTime @1729413608 {#320
    date: 2024-10-20 10:40:08.0 +02:00
  }
  +markedForDeletionAt: null
  +tags: null
  +moderators: Doctrine\ORM\PersistentCollection {#284 …}
  +ownershipRequests: Doctrine\ORM\PersistentCollection {#280 …}
  +moderatorRequests: Doctrine\ORM\PersistentCollection {#269 …}
  +entries: Doctrine\ORM\PersistentCollection {#227 …}
  +posts: Doctrine\ORM\PersistentCollection {#185 …}
  +subscriptions: Doctrine\ORM\PersistentCollection {#247 …}
  +bans: Doctrine\ORM\PersistentCollection {#164 …}
  +reports: Doctrine\ORM\PersistentCollection {#150 …}
  +badges: Doctrine\ORM\PersistentCollection {#128 …}
  +logs: Doctrine\ORM\PersistentCollection {#118 …}
  +awards: Doctrine\ORM\PersistentCollection {#107 …}
  +categories: Doctrine\ORM\PersistentCollection {#94 …}
  -id: 11
  +apId: "askelectronics@discuss.tchncs.de"
  +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
  +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
  +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
  +apInboxUrl: "https://discuss.tchncs.de/inbox"
  +apDomain: "discuss.tchncs.de"
  +apPreferredUsername: "askelectronics"
  +apDiscoverable: true
  +apManuallyApprovesFollowers: null
  +privateKey: null
  +publicKey: null
  +apFetchedAt: DateTime @1727247714 {#321
    date: 2024-09-25 09:01:54.0 +02:00
  }
  +apDeletedAt: null
  +apTimeoutAt: null
  +visibility: "visible             "
  +createdAt: DateTimeImmutable @1687144409 {#315
    date: 2023-06-19 05:13:29.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS DENIED 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details