1 |
DENIED
|
ROLE_USER
|
null |
|
Show voter details
|
2 |
DENIED
|
moderate
|
Proxies\__CG__\App\Entity\Entry {#1580
+user: App\Entity\User {#260 …}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+domain: Proxies\__CG__\App\Entity\Domain {#1723 …}
+slug: "Noticed-a-strange-occurrence-where-my-monitor-buttons-will-not"
+title: "Noticed a strange occurrence where my monitor buttons will not react to presses when certain conditions are met"
+url: null
+body: """
I have an Acer XV340CKP monitor connected via Display Port to my GPU. I also have a old LG W2253TQ that I use as a secondary display. It only has a DVI and VGA port. I have a DVI-DVI cable together with a DVI-Display Port converter to connect to my GPU, which is an Asus RX6900XT. I am running Nobara 38.\n
\n
I have observed that if I were to have my Acer monitor powered when I switch on my desktop, all the monitor buttons do not respond. None of the menu buttons, not even the power button responds. When I switch off the desktop, the monitor stays on. The only way to power it down is to unplug the power cable.\n
\n
However, if I were to only have the LG monitor powered when I switch on my desktop, all the buttons on the Acer monitor works.\n
\n
I believe everything was working previously in Nobara 37. I think this issue probably started happening in the recent month or two.\n
\n
Is this even possible, where the graphics card sends a malformed signal to the monitor and prevents the buttons from working?
"""
+type: "article"
+lang: "en"
+isOc: false
+hasEmbed: false
+commentCount: 10
+favouriteCount: 19
+score: 0
+isAdult: false
+sticky: false
+lastActive: DateTime @1701269493 {#2465
date: 2023-11-29 15:51:33.0 +01:00
}
+ip: null
+adaAmount: 0
+tags: null
+mentions: null
+comments: Doctrine\ORM\PersistentCollection {#1722 …}
+votes: Doctrine\ORM\PersistentCollection {#1726 …}
+reports: Doctrine\ORM\PersistentCollection {#1730 …}
+favourites: Doctrine\ORM\PersistentCollection {#1909 …}
+notifications: Doctrine\ORM\PersistentCollection {#2380 …}
+badges: Doctrine\ORM\PersistentCollection {#2389 …}
+children: [
1 => App\Entity\EntryComment {#1606
+user: App\Entity\User {#260 …}
+entry: Proxies\__CG__\App\Entity\Entry {#1580 …2}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+parent: Proxies\__CG__\App\Entity\EntryComment {#1651 …}
+root: Proxies\__CG__\App\Entity\EntryComment {#1651 …}
+body: "So I decided to bite the bullet and did a fresh install of Fedora 39 and that appeared to have made the issue go away. In the process of installing updates and configuring it the way I like, the monitor control buttons on both monitors response. So, it seems like the cause of the issue could have been a glitch during an update. Who knows? At least I know that it’s not a hardware issue (cross finders). :)"
+lang: "en"
+isAdult: false
+favouriteCount: 1
+score: 0
+lastActive: DateTime @1701254802 {#1440
date: 2023-11-29 11:46:42.0 +01:00
}
+ip: null
+tags: null
+mentions: [
"@root@aussie.zone"
"@TheCaconym@hexbear.net"
]
+children: Doctrine\ORM\PersistentCollection {#1649 …}
+nested: Doctrine\ORM\PersistentCollection {#1654 …}
+votes: Doctrine\ORM\PersistentCollection {#1679 …}
+reports: Doctrine\ORM\PersistentCollection {#1668 …}
+favourites: Doctrine\ORM\PersistentCollection {#1560 …}
+notifications: Doctrine\ORM\PersistentCollection {#1549 …}
-id: 176408
-bodyTs: "'39':15 'appear':18 'away':25 'bite':5 'bullet':7 'button':42 'caus':52 'configur':33 'control':41 'could':56 'cross':77 'decid':3 'fedora':14 'finder':78 'fresh':11 'glitch':60 'go':24 'hardwar':75 'instal':12,30 'issu':23,55,76 'know':65,69 'least':67 'like':38,50 'made':21 'monitor':40,45 'process':28 'respons':46 'seem':49 'updat':31,63 'way':36"
+ranking: 0
+commentCount: 0
+upVotes: 0
+downVotes: 0
+visibility: "visible "
+apId: "https://aussie.zone/comment/4709921"
+editedAt: null
+createdAt: DateTimeImmutable @1701254802 {#1703
date: 2023-11-29 11:46:42.0 +01:00
}
+"title": 176408
}
0 => App\Entity\EntryComment {#1563
+user: App\Entity\User {#260 …}
+entry: Proxies\__CG__\App\Entity\Entry {#1580 …2}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+parent: Proxies\__CG__\App\Entity\EntryComment {#1564 …}
+root: Proxies\__CG__\App\Entity\EntryComment {#1550 …}
+body: "I did not try replicating this behavior with a Windows install on my desktop. I did however perform a fresh install of Fedora 39 and that appeared to have fixed the issue, which is good news."
+lang: "en"
+isAdult: false
+favouriteCount: 0
+score: 0
+lastActive: DateTime @1701254877 {#1588
date: 2023-11-29 11:47:57.0 +01:00
}
+ip: null
+tags: null
+mentions: [
"@root@aussie.zone"
"@0x4E4F@infosec.pub"
]
+children: Doctrine\ORM\PersistentCollection {#1559 …}
+nested: Doctrine\ORM\PersistentCollection {#1565 …}
+votes: Doctrine\ORM\PersistentCollection {#1558 …}
+reports: Doctrine\ORM\PersistentCollection {#1557 …}
+favourites: Doctrine\ORM\PersistentCollection {#1621 …}
+notifications: Doctrine\ORM\PersistentCollection {#1613 …}
-id: 176410
-bodyTs: "'39':24 'appear':27 'behavior':7 'desktop':14 'fedora':23 'fix':30 'fresh':20 'good':35 'howev':17 'instal':11,21 'issu':32 'news':36 'perform':18 'replic':5 'tri':4 'window':10"
+ranking: 0
+commentCount: 0
+upVotes: 0
+downVotes: 0
+visibility: "visible "
+apId: "https://aussie.zone/comment/4709936"
+editedAt: null
+createdAt: DateTimeImmutable @1701254877 {#1566
date: 2023-11-29 11:47:57.0 +01:00
}
+"title": 176410
}
]
-id: 15886
-titleTs: "'button':8 'certain':15 'condit':16 'met':18 'monitor':7 'notic':1 'occurr':4 'press':13 'react':11 'strang':3"
-bodyTs: "'37':159 '38':65 'acer':4,76,148 'also':15 'asus':59 'believ':152 'button':88,96,101,145,191 'cabl':42,125 'card':180 'connect':7,52 'convert':50 'desktop':84,108,142 'display':9,27,48 'dvi':32,40,41,47 'dvi-display':46 'dvi-dvi':39 'even':98,175 'everyth':153 'gpu':13,55 'graphic':179 'happen':166 'howev':126 'issu':163 'lg':19,134 'malform':183 'menu':95 'monitor':6,77,87,110,135,149,187 'month':170 'nobara':64,158 'none':92 'observ':68 'old':18 'port':10,35,49 'possibl':176 'power':78,100,117,124,136 'prevent':189 'previous':156 'probabl':164 'recent':169 'respond':91,102 'run':63 'rx6900xt':60 'secondari':26 'send':181 'signal':184 'start':165 'stay':111 'switch':81,105,139 'think':161 'togeth':43 'two':172 'unplug':122 'use':23 'vga':34 'via':8 'w2253tq':20 'way':115 'work':150,155,193 'xv340ckp':5"
+cross: false
+upVotes: 0
+downVotes: 0
+ranking: 1700820644
+visibility: "visible "
+apId: "https://aussie.zone/post/4287800"
+editedAt: null
+createdAt: DateTimeImmutable @1700740144 {#1609
date: 2023-11-23 12:49:04.0 +01:00
}
+__isInitialized__: true
…2
} |
|
Show voter details
|
3 |
DENIED
|
edit
|
Proxies\__CG__\App\Entity\Entry {#1580
+user: App\Entity\User {#260 …}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+domain: Proxies\__CG__\App\Entity\Domain {#1723 …}
+slug: "Noticed-a-strange-occurrence-where-my-monitor-buttons-will-not"
+title: "Noticed a strange occurrence where my monitor buttons will not react to presses when certain conditions are met"
+url: null
+body: """
I have an Acer XV340CKP monitor connected via Display Port to my GPU. I also have a old LG W2253TQ that I use as a secondary display. It only has a DVI and VGA port. I have a DVI-DVI cable together with a DVI-Display Port converter to connect to my GPU, which is an Asus RX6900XT. I am running Nobara 38.\n
\n
I have observed that if I were to have my Acer monitor powered when I switch on my desktop, all the monitor buttons do not respond. None of the menu buttons, not even the power button responds. When I switch off the desktop, the monitor stays on. The only way to power it down is to unplug the power cable.\n
\n
However, if I were to only have the LG monitor powered when I switch on my desktop, all the buttons on the Acer monitor works.\n
\n
I believe everything was working previously in Nobara 37. I think this issue probably started happening in the recent month or two.\n
\n
Is this even possible, where the graphics card sends a malformed signal to the monitor and prevents the buttons from working?
"""
+type: "article"
+lang: "en"
+isOc: false
+hasEmbed: false
+commentCount: 10
+favouriteCount: 19
+score: 0
+isAdult: false
+sticky: false
+lastActive: DateTime @1701269493 {#2465
date: 2023-11-29 15:51:33.0 +01:00
}
+ip: null
+adaAmount: 0
+tags: null
+mentions: null
+comments: Doctrine\ORM\PersistentCollection {#1722 …}
+votes: Doctrine\ORM\PersistentCollection {#1726 …}
+reports: Doctrine\ORM\PersistentCollection {#1730 …}
+favourites: Doctrine\ORM\PersistentCollection {#1909 …}
+notifications: Doctrine\ORM\PersistentCollection {#2380 …}
+badges: Doctrine\ORM\PersistentCollection {#2389 …}
+children: [
1 => App\Entity\EntryComment {#1606
+user: App\Entity\User {#260 …}
+entry: Proxies\__CG__\App\Entity\Entry {#1580 …2}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+parent: Proxies\__CG__\App\Entity\EntryComment {#1651 …}
+root: Proxies\__CG__\App\Entity\EntryComment {#1651 …}
+body: "So I decided to bite the bullet and did a fresh install of Fedora 39 and that appeared to have made the issue go away. In the process of installing updates and configuring it the way I like, the monitor control buttons on both monitors response. So, it seems like the cause of the issue could have been a glitch during an update. Who knows? At least I know that it’s not a hardware issue (cross finders). :)"
+lang: "en"
+isAdult: false
+favouriteCount: 1
+score: 0
+lastActive: DateTime @1701254802 {#1440
date: 2023-11-29 11:46:42.0 +01:00
}
+ip: null
+tags: null
+mentions: [
"@root@aussie.zone"
"@TheCaconym@hexbear.net"
]
+children: Doctrine\ORM\PersistentCollection {#1649 …}
+nested: Doctrine\ORM\PersistentCollection {#1654 …}
+votes: Doctrine\ORM\PersistentCollection {#1679 …}
+reports: Doctrine\ORM\PersistentCollection {#1668 …}
+favourites: Doctrine\ORM\PersistentCollection {#1560 …}
+notifications: Doctrine\ORM\PersistentCollection {#1549 …}
-id: 176408
-bodyTs: "'39':15 'appear':18 'away':25 'bite':5 'bullet':7 'button':42 'caus':52 'configur':33 'control':41 'could':56 'cross':77 'decid':3 'fedora':14 'finder':78 'fresh':11 'glitch':60 'go':24 'hardwar':75 'instal':12,30 'issu':23,55,76 'know':65,69 'least':67 'like':38,50 'made':21 'monitor':40,45 'process':28 'respons':46 'seem':49 'updat':31,63 'way':36"
+ranking: 0
+commentCount: 0
+upVotes: 0
+downVotes: 0
+visibility: "visible "
+apId: "https://aussie.zone/comment/4709921"
+editedAt: null
+createdAt: DateTimeImmutable @1701254802 {#1703
date: 2023-11-29 11:46:42.0 +01:00
}
+"title": 176408
}
0 => App\Entity\EntryComment {#1563
+user: App\Entity\User {#260 …}
+entry: Proxies\__CG__\App\Entity\Entry {#1580 …2}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+parent: Proxies\__CG__\App\Entity\EntryComment {#1564 …}
+root: Proxies\__CG__\App\Entity\EntryComment {#1550 …}
+body: "I did not try replicating this behavior with a Windows install on my desktop. I did however perform a fresh install of Fedora 39 and that appeared to have fixed the issue, which is good news."
+lang: "en"
+isAdult: false
+favouriteCount: 0
+score: 0
+lastActive: DateTime @1701254877 {#1588
date: 2023-11-29 11:47:57.0 +01:00
}
+ip: null
+tags: null
+mentions: [
"@root@aussie.zone"
"@0x4E4F@infosec.pub"
]
+children: Doctrine\ORM\PersistentCollection {#1559 …}
+nested: Doctrine\ORM\PersistentCollection {#1565 …}
+votes: Doctrine\ORM\PersistentCollection {#1558 …}
+reports: Doctrine\ORM\PersistentCollection {#1557 …}
+favourites: Doctrine\ORM\PersistentCollection {#1621 …}
+notifications: Doctrine\ORM\PersistentCollection {#1613 …}
-id: 176410
-bodyTs: "'39':24 'appear':27 'behavior':7 'desktop':14 'fedora':23 'fix':30 'fresh':20 'good':35 'howev':17 'instal':11,21 'issu':32 'news':36 'perform':18 'replic':5 'tri':4 'window':10"
+ranking: 0
+commentCount: 0
+upVotes: 0
+downVotes: 0
+visibility: "visible "
+apId: "https://aussie.zone/comment/4709936"
+editedAt: null
+createdAt: DateTimeImmutable @1701254877 {#1566
date: 2023-11-29 11:47:57.0 +01:00
}
+"title": 176410
}
]
-id: 15886
-titleTs: "'button':8 'certain':15 'condit':16 'met':18 'monitor':7 'notic':1 'occurr':4 'press':13 'react':11 'strang':3"
-bodyTs: "'37':159 '38':65 'acer':4,76,148 'also':15 'asus':59 'believ':152 'button':88,96,101,145,191 'cabl':42,125 'card':180 'connect':7,52 'convert':50 'desktop':84,108,142 'display':9,27,48 'dvi':32,40,41,47 'dvi-display':46 'dvi-dvi':39 'even':98,175 'everyth':153 'gpu':13,55 'graphic':179 'happen':166 'howev':126 'issu':163 'lg':19,134 'malform':183 'menu':95 'monitor':6,77,87,110,135,149,187 'month':170 'nobara':64,158 'none':92 'observ':68 'old':18 'port':10,35,49 'possibl':176 'power':78,100,117,124,136 'prevent':189 'previous':156 'probabl':164 'recent':169 'respond':91,102 'run':63 'rx6900xt':60 'secondari':26 'send':181 'signal':184 'start':165 'stay':111 'switch':81,105,139 'think':161 'togeth':43 'two':172 'unplug':122 'use':23 'vga':34 'via':8 'w2253tq':20 'way':115 'work':150,155,193 'xv340ckp':5"
+cross: false
+upVotes: 0
+downVotes: 0
+ranking: 1700820644
+visibility: "visible "
+apId: "https://aussie.zone/post/4287800"
+editedAt: null
+createdAt: DateTimeImmutable @1700740144 {#1609
date: 2023-11-23 12:49:04.0 +01:00
}
+__isInitialized__: true
…2
} |
|
Show voter details
|
4 |
DENIED
|
moderate
|
Proxies\__CG__\App\Entity\Entry {#1580
+user: App\Entity\User {#260 …}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+domain: Proxies\__CG__\App\Entity\Domain {#1723 …}
+slug: "Noticed-a-strange-occurrence-where-my-monitor-buttons-will-not"
+title: "Noticed a strange occurrence where my monitor buttons will not react to presses when certain conditions are met"
+url: null
+body: """
I have an Acer XV340CKP monitor connected via Display Port to my GPU. I also have a old LG W2253TQ that I use as a secondary display. It only has a DVI and VGA port. I have a DVI-DVI cable together with a DVI-Display Port converter to connect to my GPU, which is an Asus RX6900XT. I am running Nobara 38.\n
\n
I have observed that if I were to have my Acer monitor powered when I switch on my desktop, all the monitor buttons do not respond. None of the menu buttons, not even the power button responds. When I switch off the desktop, the monitor stays on. The only way to power it down is to unplug the power cable.\n
\n
However, if I were to only have the LG monitor powered when I switch on my desktop, all the buttons on the Acer monitor works.\n
\n
I believe everything was working previously in Nobara 37. I think this issue probably started happening in the recent month or two.\n
\n
Is this even possible, where the graphics card sends a malformed signal to the monitor and prevents the buttons from working?
"""
+type: "article"
+lang: "en"
+isOc: false
+hasEmbed: false
+commentCount: 10
+favouriteCount: 19
+score: 0
+isAdult: false
+sticky: false
+lastActive: DateTime @1701269493 {#2465
date: 2023-11-29 15:51:33.0 +01:00
}
+ip: null
+adaAmount: 0
+tags: null
+mentions: null
+comments: Doctrine\ORM\PersistentCollection {#1722 …}
+votes: Doctrine\ORM\PersistentCollection {#1726 …}
+reports: Doctrine\ORM\PersistentCollection {#1730 …}
+favourites: Doctrine\ORM\PersistentCollection {#1909 …}
+notifications: Doctrine\ORM\PersistentCollection {#2380 …}
+badges: Doctrine\ORM\PersistentCollection {#2389 …}
+children: [
1 => App\Entity\EntryComment {#1606
+user: App\Entity\User {#260 …}
+entry: Proxies\__CG__\App\Entity\Entry {#1580 …2}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+parent: Proxies\__CG__\App\Entity\EntryComment {#1651 …}
+root: Proxies\__CG__\App\Entity\EntryComment {#1651 …}
+body: "So I decided to bite the bullet and did a fresh install of Fedora 39 and that appeared to have made the issue go away. In the process of installing updates and configuring it the way I like, the monitor control buttons on both monitors response. So, it seems like the cause of the issue could have been a glitch during an update. Who knows? At least I know that it’s not a hardware issue (cross finders). :)"
+lang: "en"
+isAdult: false
+favouriteCount: 1
+score: 0
+lastActive: DateTime @1701254802 {#1440
date: 2023-11-29 11:46:42.0 +01:00
}
+ip: null
+tags: null
+mentions: [
"@root@aussie.zone"
"@TheCaconym@hexbear.net"
]
+children: Doctrine\ORM\PersistentCollection {#1649 …}
+nested: Doctrine\ORM\PersistentCollection {#1654 …}
+votes: Doctrine\ORM\PersistentCollection {#1679 …}
+reports: Doctrine\ORM\PersistentCollection {#1668 …}
+favourites: Doctrine\ORM\PersistentCollection {#1560 …}
+notifications: Doctrine\ORM\PersistentCollection {#1549 …}
-id: 176408
-bodyTs: "'39':15 'appear':18 'away':25 'bite':5 'bullet':7 'button':42 'caus':52 'configur':33 'control':41 'could':56 'cross':77 'decid':3 'fedora':14 'finder':78 'fresh':11 'glitch':60 'go':24 'hardwar':75 'instal':12,30 'issu':23,55,76 'know':65,69 'least':67 'like':38,50 'made':21 'monitor':40,45 'process':28 'respons':46 'seem':49 'updat':31,63 'way':36"
+ranking: 0
+commentCount: 0
+upVotes: 0
+downVotes: 0
+visibility: "visible "
+apId: "https://aussie.zone/comment/4709921"
+editedAt: null
+createdAt: DateTimeImmutable @1701254802 {#1703
date: 2023-11-29 11:46:42.0 +01:00
}
+"title": 176408
}
0 => App\Entity\EntryComment {#1563
+user: App\Entity\User {#260 …}
+entry: Proxies\__CG__\App\Entity\Entry {#1580 …2}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+parent: Proxies\__CG__\App\Entity\EntryComment {#1564 …}
+root: Proxies\__CG__\App\Entity\EntryComment {#1550 …}
+body: "I did not try replicating this behavior with a Windows install on my desktop. I did however perform a fresh install of Fedora 39 and that appeared to have fixed the issue, which is good news."
+lang: "en"
+isAdult: false
+favouriteCount: 0
+score: 0
+lastActive: DateTime @1701254877 {#1588
date: 2023-11-29 11:47:57.0 +01:00
}
+ip: null
+tags: null
+mentions: [
"@root@aussie.zone"
"@0x4E4F@infosec.pub"
]
+children: Doctrine\ORM\PersistentCollection {#1559 …}
+nested: Doctrine\ORM\PersistentCollection {#1565 …}
+votes: Doctrine\ORM\PersistentCollection {#1558 …}
+reports: Doctrine\ORM\PersistentCollection {#1557 …}
+favourites: Doctrine\ORM\PersistentCollection {#1621 …}
+notifications: Doctrine\ORM\PersistentCollection {#1613 …}
-id: 176410
-bodyTs: "'39':24 'appear':27 'behavior':7 'desktop':14 'fedora':23 'fix':30 'fresh':20 'good':35 'howev':17 'instal':11,21 'issu':32 'news':36 'perform':18 'replic':5 'tri':4 'window':10"
+ranking: 0
+commentCount: 0
+upVotes: 0
+downVotes: 0
+visibility: "visible "
+apId: "https://aussie.zone/comment/4709936"
+editedAt: null
+createdAt: DateTimeImmutable @1701254877 {#1566
date: 2023-11-29 11:47:57.0 +01:00
}
+"title": 176410
}
]
-id: 15886
-titleTs: "'button':8 'certain':15 'condit':16 'met':18 'monitor':7 'notic':1 'occurr':4 'press':13 'react':11 'strang':3"
-bodyTs: "'37':159 '38':65 'acer':4,76,148 'also':15 'asus':59 'believ':152 'button':88,96,101,145,191 'cabl':42,125 'card':180 'connect':7,52 'convert':50 'desktop':84,108,142 'display':9,27,48 'dvi':32,40,41,47 'dvi-display':46 'dvi-dvi':39 'even':98,175 'everyth':153 'gpu':13,55 'graphic':179 'happen':166 'howev':126 'issu':163 'lg':19,134 'malform':183 'menu':95 'monitor':6,77,87,110,135,149,187 'month':170 'nobara':64,158 'none':92 'observ':68 'old':18 'port':10,35,49 'possibl':176 'power':78,100,117,124,136 'prevent':189 'previous':156 'probabl':164 'recent':169 'respond':91,102 'run':63 'rx6900xt':60 'secondari':26 'send':181 'signal':184 'start':165 'stay':111 'switch':81,105,139 'think':161 'togeth':43 'two':172 'unplug':122 'use':23 'vga':34 'via':8 'w2253tq':20 'way':115 'work':150,155,193 'xv340ckp':5"
+cross: false
+upVotes: 0
+downVotes: 0
+ranking: 1700820644
+visibility: "visible "
+apId: "https://aussie.zone/post/4287800"
+editedAt: null
+createdAt: DateTimeImmutable @1700740144 {#1609
date: 2023-11-23 12:49:04.0 +01:00
}
+__isInitialized__: true
…2
} |
|
Show voter details
|
5 |
DENIED
|
ROLE_USER
|
null |
|
Show voter details
|
6 |
DENIED
|
moderate
|
App\Entity\EntryComment {#1606
+user: App\Entity\User {#260 …}
+entry: Proxies\__CG__\App\Entity\Entry {#1580
+user: App\Entity\User {#260 …}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+domain: Proxies\__CG__\App\Entity\Domain {#1723 …}
+slug: "Noticed-a-strange-occurrence-where-my-monitor-buttons-will-not"
+title: "Noticed a strange occurrence where my monitor buttons will not react to presses when certain conditions are met"
+url: null
+body: """
I have an Acer XV340CKP monitor connected via Display Port to my GPU. I also have a old LG W2253TQ that I use as a secondary display. It only has a DVI and VGA port. I have a DVI-DVI cable together with a DVI-Display Port converter to connect to my GPU, which is an Asus RX6900XT. I am running Nobara 38.\n
\n
I have observed that if I were to have my Acer monitor powered when I switch on my desktop, all the monitor buttons do not respond. None of the menu buttons, not even the power button responds. When I switch off the desktop, the monitor stays on. The only way to power it down is to unplug the power cable.\n
\n
However, if I were to only have the LG monitor powered when I switch on my desktop, all the buttons on the Acer monitor works.\n
\n
I believe everything was working previously in Nobara 37. I think this issue probably started happening in the recent month or two.\n
\n
Is this even possible, where the graphics card sends a malformed signal to the monitor and prevents the buttons from working?
"""
+type: "article"
+lang: "en"
+isOc: false
+hasEmbed: false
+commentCount: 10
+favouriteCount: 19
+score: 0
+isAdult: false
+sticky: false
+lastActive: DateTime @1701269493 {#2465
date: 2023-11-29 15:51:33.0 +01:00
}
+ip: null
+adaAmount: 0
+tags: null
+mentions: null
+comments: Doctrine\ORM\PersistentCollection {#1722 …}
+votes: Doctrine\ORM\PersistentCollection {#1726 …}
+reports: Doctrine\ORM\PersistentCollection {#1730 …}
+favourites: Doctrine\ORM\PersistentCollection {#1909 …}
+notifications: Doctrine\ORM\PersistentCollection {#2380 …}
+badges: Doctrine\ORM\PersistentCollection {#2389 …}
+children: [
1 => App\Entity\EntryComment {#1606}
0 => App\Entity\EntryComment {#1563
+user: App\Entity\User {#260 …}
+entry: Proxies\__CG__\App\Entity\Entry {#1580 …2}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+parent: Proxies\__CG__\App\Entity\EntryComment {#1564 …}
+root: Proxies\__CG__\App\Entity\EntryComment {#1550 …}
+body: "I did not try replicating this behavior with a Windows install on my desktop. I did however perform a fresh install of Fedora 39 and that appeared to have fixed the issue, which is good news."
+lang: "en"
+isAdult: false
+favouriteCount: 0
+score: 0
+lastActive: DateTime @1701254877 {#1588
date: 2023-11-29 11:47:57.0 +01:00
}
+ip: null
+tags: null
+mentions: [
"@root@aussie.zone"
"@0x4E4F@infosec.pub"
]
+children: Doctrine\ORM\PersistentCollection {#1559 …}
+nested: Doctrine\ORM\PersistentCollection {#1565 …}
+votes: Doctrine\ORM\PersistentCollection {#1558 …}
+reports: Doctrine\ORM\PersistentCollection {#1557 …}
+favourites: Doctrine\ORM\PersistentCollection {#1621 …}
+notifications: Doctrine\ORM\PersistentCollection {#1613 …}
-id: 176410
-bodyTs: "'39':24 'appear':27 'behavior':7 'desktop':14 'fedora':23 'fix':30 'fresh':20 'good':35 'howev':17 'instal':11,21 'issu':32 'news':36 'perform':18 'replic':5 'tri':4 'window':10"
+ranking: 0
+commentCount: 0
+upVotes: 0
+downVotes: 0
+visibility: "visible "
+apId: "https://aussie.zone/comment/4709936"
+editedAt: null
+createdAt: DateTimeImmutable @1701254877 {#1566
date: 2023-11-29 11:47:57.0 +01:00
}
+"title": 176410
}
]
-id: 15886
-titleTs: "'button':8 'certain':15 'condit':16 'met':18 'monitor':7 'notic':1 'occurr':4 'press':13 'react':11 'strang':3"
-bodyTs: "'37':159 '38':65 'acer':4,76,148 'also':15 'asus':59 'believ':152 'button':88,96,101,145,191 'cabl':42,125 'card':180 'connect':7,52 'convert':50 'desktop':84,108,142 'display':9,27,48 'dvi':32,40,41,47 'dvi-display':46 'dvi-dvi':39 'even':98,175 'everyth':153 'gpu':13,55 'graphic':179 'happen':166 'howev':126 'issu':163 'lg':19,134 'malform':183 'menu':95 'monitor':6,77,87,110,135,149,187 'month':170 'nobara':64,158 'none':92 'observ':68 'old':18 'port':10,35,49 'possibl':176 'power':78,100,117,124,136 'prevent':189 'previous':156 'probabl':164 'recent':169 'respond':91,102 'run':63 'rx6900xt':60 'secondari':26 'send':181 'signal':184 'start':165 'stay':111 'switch':81,105,139 'think':161 'togeth':43 'two':172 'unplug':122 'use':23 'vga':34 'via':8 'w2253tq':20 'way':115 'work':150,155,193 'xv340ckp':5"
+cross: false
+upVotes: 0
+downVotes: 0
+ranking: 1700820644
+visibility: "visible "
+apId: "https://aussie.zone/post/4287800"
+editedAt: null
+createdAt: DateTimeImmutable @1700740144 {#1609
date: 2023-11-23 12:49:04.0 +01:00
}
+__isInitialized__: true
…2
}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+parent: Proxies\__CG__\App\Entity\EntryComment {#1651 …}
+root: Proxies\__CG__\App\Entity\EntryComment {#1651 …}
+body: "So I decided to bite the bullet and did a fresh install of Fedora 39 and that appeared to have made the issue go away. In the process of installing updates and configuring it the way I like, the monitor control buttons on both monitors response. So, it seems like the cause of the issue could have been a glitch during an update. Who knows? At least I know that it’s not a hardware issue (cross finders). :)"
+lang: "en"
+isAdult: false
+favouriteCount: 1
+score: 0
+lastActive: DateTime @1701254802 {#1440
date: 2023-11-29 11:46:42.0 +01:00
}
+ip: null
+tags: null
+mentions: [
"@root@aussie.zone"
"@TheCaconym@hexbear.net"
]
+children: Doctrine\ORM\PersistentCollection {#1649 …}
+nested: Doctrine\ORM\PersistentCollection {#1654 …}
+votes: Doctrine\ORM\PersistentCollection {#1679 …}
+reports: Doctrine\ORM\PersistentCollection {#1668 …}
+favourites: Doctrine\ORM\PersistentCollection {#1560 …}
+notifications: Doctrine\ORM\PersistentCollection {#1549 …}
-id: 176408
-bodyTs: "'39':15 'appear':18 'away':25 'bite':5 'bullet':7 'button':42 'caus':52 'configur':33 'control':41 'could':56 'cross':77 'decid':3 'fedora':14 'finder':78 'fresh':11 'glitch':60 'go':24 'hardwar':75 'instal':12,30 'issu':23,55,76 'know':65,69 'least':67 'like':38,50 'made':21 'monitor':40,45 'process':28 'respons':46 'seem':49 'updat':31,63 'way':36"
+ranking: 0
+commentCount: 0
+upVotes: 0
+downVotes: 0
+visibility: "visible "
+apId: "https://aussie.zone/comment/4709921"
+editedAt: null
+createdAt: DateTimeImmutable @1701254802 {#1703
date: 2023-11-29 11:46:42.0 +01:00
}
+"title": 176408
} |
|
Show voter details
|
7 |
DENIED
|
edit
|
App\Entity\EntryComment {#1606
+user: App\Entity\User {#260 …}
+entry: Proxies\__CG__\App\Entity\Entry {#1580
+user: App\Entity\User {#260 …}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+domain: Proxies\__CG__\App\Entity\Domain {#1723 …}
+slug: "Noticed-a-strange-occurrence-where-my-monitor-buttons-will-not"
+title: "Noticed a strange occurrence where my monitor buttons will not react to presses when certain conditions are met"
+url: null
+body: """
I have an Acer XV340CKP monitor connected via Display Port to my GPU. I also have a old LG W2253TQ that I use as a secondary display. It only has a DVI and VGA port. I have a DVI-DVI cable together with a DVI-Display Port converter to connect to my GPU, which is an Asus RX6900XT. I am running Nobara 38.\n
\n
I have observed that if I were to have my Acer monitor powered when I switch on my desktop, all the monitor buttons do not respond. None of the menu buttons, not even the power button responds. When I switch off the desktop, the monitor stays on. The only way to power it down is to unplug the power cable.\n
\n
However, if I were to only have the LG monitor powered when I switch on my desktop, all the buttons on the Acer monitor works.\n
\n
I believe everything was working previously in Nobara 37. I think this issue probably started happening in the recent month or two.\n
\n
Is this even possible, where the graphics card sends a malformed signal to the monitor and prevents the buttons from working?
"""
+type: "article"
+lang: "en"
+isOc: false
+hasEmbed: false
+commentCount: 10
+favouriteCount: 19
+score: 0
+isAdult: false
+sticky: false
+lastActive: DateTime @1701269493 {#2465
date: 2023-11-29 15:51:33.0 +01:00
}
+ip: null
+adaAmount: 0
+tags: null
+mentions: null
+comments: Doctrine\ORM\PersistentCollection {#1722 …}
+votes: Doctrine\ORM\PersistentCollection {#1726 …}
+reports: Doctrine\ORM\PersistentCollection {#1730 …}
+favourites: Doctrine\ORM\PersistentCollection {#1909 …}
+notifications: Doctrine\ORM\PersistentCollection {#2380 …}
+badges: Doctrine\ORM\PersistentCollection {#2389 …}
+children: [
1 => App\Entity\EntryComment {#1606}
0 => App\Entity\EntryComment {#1563
+user: App\Entity\User {#260 …}
+entry: Proxies\__CG__\App\Entity\Entry {#1580 …2}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+parent: Proxies\__CG__\App\Entity\EntryComment {#1564 …}
+root: Proxies\__CG__\App\Entity\EntryComment {#1550 …}
+body: "I did not try replicating this behavior with a Windows install on my desktop. I did however perform a fresh install of Fedora 39 and that appeared to have fixed the issue, which is good news."
+lang: "en"
+isAdult: false
+favouriteCount: 0
+score: 0
+lastActive: DateTime @1701254877 {#1588
date: 2023-11-29 11:47:57.0 +01:00
}
+ip: null
+tags: null
+mentions: [
"@root@aussie.zone"
"@0x4E4F@infosec.pub"
]
+children: Doctrine\ORM\PersistentCollection {#1559 …}
+nested: Doctrine\ORM\PersistentCollection {#1565 …}
+votes: Doctrine\ORM\PersistentCollection {#1558 …}
+reports: Doctrine\ORM\PersistentCollection {#1557 …}
+favourites: Doctrine\ORM\PersistentCollection {#1621 …}
+notifications: Doctrine\ORM\PersistentCollection {#1613 …}
-id: 176410
-bodyTs: "'39':24 'appear':27 'behavior':7 'desktop':14 'fedora':23 'fix':30 'fresh':20 'good':35 'howev':17 'instal':11,21 'issu':32 'news':36 'perform':18 'replic':5 'tri':4 'window':10"
+ranking: 0
+commentCount: 0
+upVotes: 0
+downVotes: 0
+visibility: "visible "
+apId: "https://aussie.zone/comment/4709936"
+editedAt: null
+createdAt: DateTimeImmutable @1701254877 {#1566
date: 2023-11-29 11:47:57.0 +01:00
}
+"title": 176410
}
]
-id: 15886
-titleTs: "'button':8 'certain':15 'condit':16 'met':18 'monitor':7 'notic':1 'occurr':4 'press':13 'react':11 'strang':3"
-bodyTs: "'37':159 '38':65 'acer':4,76,148 'also':15 'asus':59 'believ':152 'button':88,96,101,145,191 'cabl':42,125 'card':180 'connect':7,52 'convert':50 'desktop':84,108,142 'display':9,27,48 'dvi':32,40,41,47 'dvi-display':46 'dvi-dvi':39 'even':98,175 'everyth':153 'gpu':13,55 'graphic':179 'happen':166 'howev':126 'issu':163 'lg':19,134 'malform':183 'menu':95 'monitor':6,77,87,110,135,149,187 'month':170 'nobara':64,158 'none':92 'observ':68 'old':18 'port':10,35,49 'possibl':176 'power':78,100,117,124,136 'prevent':189 'previous':156 'probabl':164 'recent':169 'respond':91,102 'run':63 'rx6900xt':60 'secondari':26 'send':181 'signal':184 'start':165 'stay':111 'switch':81,105,139 'think':161 'togeth':43 'two':172 'unplug':122 'use':23 'vga':34 'via':8 'w2253tq':20 'way':115 'work':150,155,193 'xv340ckp':5"
+cross: false
+upVotes: 0
+downVotes: 0
+ranking: 1700820644
+visibility: "visible "
+apId: "https://aussie.zone/post/4287800"
+editedAt: null
+createdAt: DateTimeImmutable @1700740144 {#1609
date: 2023-11-23 12:49:04.0 +01:00
}
+__isInitialized__: true
…2
}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+parent: Proxies\__CG__\App\Entity\EntryComment {#1651 …}
+root: Proxies\__CG__\App\Entity\EntryComment {#1651 …}
+body: "So I decided to bite the bullet and did a fresh install of Fedora 39 and that appeared to have made the issue go away. In the process of installing updates and configuring it the way I like, the monitor control buttons on both monitors response. So, it seems like the cause of the issue could have been a glitch during an update. Who knows? At least I know that it’s not a hardware issue (cross finders). :)"
+lang: "en"
+isAdult: false
+favouriteCount: 1
+score: 0
+lastActive: DateTime @1701254802 {#1440
date: 2023-11-29 11:46:42.0 +01:00
}
+ip: null
+tags: null
+mentions: [
"@root@aussie.zone"
"@TheCaconym@hexbear.net"
]
+children: Doctrine\ORM\PersistentCollection {#1649 …}
+nested: Doctrine\ORM\PersistentCollection {#1654 …}
+votes: Doctrine\ORM\PersistentCollection {#1679 …}
+reports: Doctrine\ORM\PersistentCollection {#1668 …}
+favourites: Doctrine\ORM\PersistentCollection {#1560 …}
+notifications: Doctrine\ORM\PersistentCollection {#1549 …}
-id: 176408
-bodyTs: "'39':15 'appear':18 'away':25 'bite':5 'bullet':7 'button':42 'caus':52 'configur':33 'control':41 'could':56 'cross':77 'decid':3 'fedora':14 'finder':78 'fresh':11 'glitch':60 'go':24 'hardwar':75 'instal':12,30 'issu':23,55,76 'know':65,69 'least':67 'like':38,50 'made':21 'monitor':40,45 'process':28 'respons':46 'seem':49 'updat':31,63 'way':36"
+ranking: 0
+commentCount: 0
+upVotes: 0
+downVotes: 0
+visibility: "visible "
+apId: "https://aussie.zone/comment/4709921"
+editedAt: null
+createdAt: DateTimeImmutable @1701254802 {#1703
date: 2023-11-29 11:46:42.0 +01:00
}
+"title": 176408
} |
|
Show voter details
|
8 |
DENIED
|
moderate
|
App\Entity\EntryComment {#1606
+user: App\Entity\User {#260 …}
+entry: Proxies\__CG__\App\Entity\Entry {#1580
+user: App\Entity\User {#260 …}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+domain: Proxies\__CG__\App\Entity\Domain {#1723 …}
+slug: "Noticed-a-strange-occurrence-where-my-monitor-buttons-will-not"
+title: "Noticed a strange occurrence where my monitor buttons will not react to presses when certain conditions are met"
+url: null
+body: """
I have an Acer XV340CKP monitor connected via Display Port to my GPU. I also have a old LG W2253TQ that I use as a secondary display. It only has a DVI and VGA port. I have a DVI-DVI cable together with a DVI-Display Port converter to connect to my GPU, which is an Asus RX6900XT. I am running Nobara 38.\n
\n
I have observed that if I were to have my Acer monitor powered when I switch on my desktop, all the monitor buttons do not respond. None of the menu buttons, not even the power button responds. When I switch off the desktop, the monitor stays on. The only way to power it down is to unplug the power cable.\n
\n
However, if I were to only have the LG monitor powered when I switch on my desktop, all the buttons on the Acer monitor works.\n
\n
I believe everything was working previously in Nobara 37. I think this issue probably started happening in the recent month or two.\n
\n
Is this even possible, where the graphics card sends a malformed signal to the monitor and prevents the buttons from working?
"""
+type: "article"
+lang: "en"
+isOc: false
+hasEmbed: false
+commentCount: 10
+favouriteCount: 19
+score: 0
+isAdult: false
+sticky: false
+lastActive: DateTime @1701269493 {#2465
date: 2023-11-29 15:51:33.0 +01:00
}
+ip: null
+adaAmount: 0
+tags: null
+mentions: null
+comments: Doctrine\ORM\PersistentCollection {#1722 …}
+votes: Doctrine\ORM\PersistentCollection {#1726 …}
+reports: Doctrine\ORM\PersistentCollection {#1730 …}
+favourites: Doctrine\ORM\PersistentCollection {#1909 …}
+notifications: Doctrine\ORM\PersistentCollection {#2380 …}
+badges: Doctrine\ORM\PersistentCollection {#2389 …}
+children: [
1 => App\Entity\EntryComment {#1606}
0 => App\Entity\EntryComment {#1563
+user: App\Entity\User {#260 …}
+entry: Proxies\__CG__\App\Entity\Entry {#1580 …2}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+parent: Proxies\__CG__\App\Entity\EntryComment {#1564 …}
+root: Proxies\__CG__\App\Entity\EntryComment {#1550 …}
+body: "I did not try replicating this behavior with a Windows install on my desktop. I did however perform a fresh install of Fedora 39 and that appeared to have fixed the issue, which is good news."
+lang: "en"
+isAdult: false
+favouriteCount: 0
+score: 0
+lastActive: DateTime @1701254877 {#1588
date: 2023-11-29 11:47:57.0 +01:00
}
+ip: null
+tags: null
+mentions: [
"@root@aussie.zone"
"@0x4E4F@infosec.pub"
]
+children: Doctrine\ORM\PersistentCollection {#1559 …}
+nested: Doctrine\ORM\PersistentCollection {#1565 …}
+votes: Doctrine\ORM\PersistentCollection {#1558 …}
+reports: Doctrine\ORM\PersistentCollection {#1557 …}
+favourites: Doctrine\ORM\PersistentCollection {#1621 …}
+notifications: Doctrine\ORM\PersistentCollection {#1613 …}
-id: 176410
-bodyTs: "'39':24 'appear':27 'behavior':7 'desktop':14 'fedora':23 'fix':30 'fresh':20 'good':35 'howev':17 'instal':11,21 'issu':32 'news':36 'perform':18 'replic':5 'tri':4 'window':10"
+ranking: 0
+commentCount: 0
+upVotes: 0
+downVotes: 0
+visibility: "visible "
+apId: "https://aussie.zone/comment/4709936"
+editedAt: null
+createdAt: DateTimeImmutable @1701254877 {#1566
date: 2023-11-29 11:47:57.0 +01:00
}
+"title": 176410
}
]
-id: 15886
-titleTs: "'button':8 'certain':15 'condit':16 'met':18 'monitor':7 'notic':1 'occurr':4 'press':13 'react':11 'strang':3"
-bodyTs: "'37':159 '38':65 'acer':4,76,148 'also':15 'asus':59 'believ':152 'button':88,96,101,145,191 'cabl':42,125 'card':180 'connect':7,52 'convert':50 'desktop':84,108,142 'display':9,27,48 'dvi':32,40,41,47 'dvi-display':46 'dvi-dvi':39 'even':98,175 'everyth':153 'gpu':13,55 'graphic':179 'happen':166 'howev':126 'issu':163 'lg':19,134 'malform':183 'menu':95 'monitor':6,77,87,110,135,149,187 'month':170 'nobara':64,158 'none':92 'observ':68 'old':18 'port':10,35,49 'possibl':176 'power':78,100,117,124,136 'prevent':189 'previous':156 'probabl':164 'recent':169 'respond':91,102 'run':63 'rx6900xt':60 'secondari':26 'send':181 'signal':184 'start':165 'stay':111 'switch':81,105,139 'think':161 'togeth':43 'two':172 'unplug':122 'use':23 'vga':34 'via':8 'w2253tq':20 'way':115 'work':150,155,193 'xv340ckp':5"
+cross: false
+upVotes: 0
+downVotes: 0
+ranking: 1700820644
+visibility: "visible "
+apId: "https://aussie.zone/post/4287800"
+editedAt: null
+createdAt: DateTimeImmutable @1700740144 {#1609
date: 2023-11-23 12:49:04.0 +01:00
}
+__isInitialized__: true
…2
}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+parent: Proxies\__CG__\App\Entity\EntryComment {#1651 …}
+root: Proxies\__CG__\App\Entity\EntryComment {#1651 …}
+body: "So I decided to bite the bullet and did a fresh install of Fedora 39 and that appeared to have made the issue go away. In the process of installing updates and configuring it the way I like, the monitor control buttons on both monitors response. So, it seems like the cause of the issue could have been a glitch during an update. Who knows? At least I know that it’s not a hardware issue (cross finders). :)"
+lang: "en"
+isAdult: false
+favouriteCount: 1
+score: 0
+lastActive: DateTime @1701254802 {#1440
date: 2023-11-29 11:46:42.0 +01:00
}
+ip: null
+tags: null
+mentions: [
"@root@aussie.zone"
"@TheCaconym@hexbear.net"
]
+children: Doctrine\ORM\PersistentCollection {#1649 …}
+nested: Doctrine\ORM\PersistentCollection {#1654 …}
+votes: Doctrine\ORM\PersistentCollection {#1679 …}
+reports: Doctrine\ORM\PersistentCollection {#1668 …}
+favourites: Doctrine\ORM\PersistentCollection {#1560 …}
+notifications: Doctrine\ORM\PersistentCollection {#1549 …}
-id: 176408
-bodyTs: "'39':15 'appear':18 'away':25 'bite':5 'bullet':7 'button':42 'caus':52 'configur':33 'control':41 'could':56 'cross':77 'decid':3 'fedora':14 'finder':78 'fresh':11 'glitch':60 'go':24 'hardwar':75 'instal':12,30 'issu':23,55,76 'know':65,69 'least':67 'like':38,50 'made':21 'monitor':40,45 'process':28 'respons':46 'seem':49 'updat':31,63 'way':36"
+ranking: 0
+commentCount: 0
+upVotes: 0
+downVotes: 0
+visibility: "visible "
+apId: "https://aussie.zone/comment/4709921"
+editedAt: null
+createdAt: DateTimeImmutable @1701254802 {#1703
date: 2023-11-29 11:46:42.0 +01:00
}
+"title": 176408
} |
|
Show voter details
|
9 |
DENIED
|
ROLE_USER
|
null |
|
Show voter details
|
10 |
DENIED
|
moderate
|
App\Entity\EntryComment {#1563
+user: App\Entity\User {#260 …}
+entry: Proxies\__CG__\App\Entity\Entry {#1580
+user: App\Entity\User {#260 …}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+domain: Proxies\__CG__\App\Entity\Domain {#1723 …}
+slug: "Noticed-a-strange-occurrence-where-my-monitor-buttons-will-not"
+title: "Noticed a strange occurrence where my monitor buttons will not react to presses when certain conditions are met"
+url: null
+body: """
I have an Acer XV340CKP monitor connected via Display Port to my GPU. I also have a old LG W2253TQ that I use as a secondary display. It only has a DVI and VGA port. I have a DVI-DVI cable together with a DVI-Display Port converter to connect to my GPU, which is an Asus RX6900XT. I am running Nobara 38.\n
\n
I have observed that if I were to have my Acer monitor powered when I switch on my desktop, all the monitor buttons do not respond. None of the menu buttons, not even the power button responds. When I switch off the desktop, the monitor stays on. The only way to power it down is to unplug the power cable.\n
\n
However, if I were to only have the LG monitor powered when I switch on my desktop, all the buttons on the Acer monitor works.\n
\n
I believe everything was working previously in Nobara 37. I think this issue probably started happening in the recent month or two.\n
\n
Is this even possible, where the graphics card sends a malformed signal to the monitor and prevents the buttons from working?
"""
+type: "article"
+lang: "en"
+isOc: false
+hasEmbed: false
+commentCount: 10
+favouriteCount: 19
+score: 0
+isAdult: false
+sticky: false
+lastActive: DateTime @1701269493 {#2465
date: 2023-11-29 15:51:33.0 +01:00
}
+ip: null
+adaAmount: 0
+tags: null
+mentions: null
+comments: Doctrine\ORM\PersistentCollection {#1722 …}
+votes: Doctrine\ORM\PersistentCollection {#1726 …}
+reports: Doctrine\ORM\PersistentCollection {#1730 …}
+favourites: Doctrine\ORM\PersistentCollection {#1909 …}
+notifications: Doctrine\ORM\PersistentCollection {#2380 …}
+badges: Doctrine\ORM\PersistentCollection {#2389 …}
+children: [
1 => App\Entity\EntryComment {#1606
+user: App\Entity\User {#260 …}
+entry: Proxies\__CG__\App\Entity\Entry {#1580 …2}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+parent: Proxies\__CG__\App\Entity\EntryComment {#1651 …}
+root: Proxies\__CG__\App\Entity\EntryComment {#1651 …}
+body: "So I decided to bite the bullet and did a fresh install of Fedora 39 and that appeared to have made the issue go away. In the process of installing updates and configuring it the way I like, the monitor control buttons on both monitors response. So, it seems like the cause of the issue could have been a glitch during an update. Who knows? At least I know that it’s not a hardware issue (cross finders). :)"
+lang: "en"
+isAdult: false
+favouriteCount: 1
+score: 0
+lastActive: DateTime @1701254802 {#1440
date: 2023-11-29 11:46:42.0 +01:00
}
+ip: null
+tags: null
+mentions: [
"@root@aussie.zone"
"@TheCaconym@hexbear.net"
]
+children: Doctrine\ORM\PersistentCollection {#1649 …}
+nested: Doctrine\ORM\PersistentCollection {#1654 …}
+votes: Doctrine\ORM\PersistentCollection {#1679 …}
+reports: Doctrine\ORM\PersistentCollection {#1668 …}
+favourites: Doctrine\ORM\PersistentCollection {#1560 …}
+notifications: Doctrine\ORM\PersistentCollection {#1549 …}
-id: 176408
-bodyTs: "'39':15 'appear':18 'away':25 'bite':5 'bullet':7 'button':42 'caus':52 'configur':33 'control':41 'could':56 'cross':77 'decid':3 'fedora':14 'finder':78 'fresh':11 'glitch':60 'go':24 'hardwar':75 'instal':12,30 'issu':23,55,76 'know':65,69 'least':67 'like':38,50 'made':21 'monitor':40,45 'process':28 'respons':46 'seem':49 'updat':31,63 'way':36"
+ranking: 0
+commentCount: 0
+upVotes: 0
+downVotes: 0
+visibility: "visible "
+apId: "https://aussie.zone/comment/4709921"
+editedAt: null
+createdAt: DateTimeImmutable @1701254802 {#1703
date: 2023-11-29 11:46:42.0 +01:00
}
+"title": 176408
}
0 => App\Entity\EntryComment {#1563}
]
-id: 15886
-titleTs: "'button':8 'certain':15 'condit':16 'met':18 'monitor':7 'notic':1 'occurr':4 'press':13 'react':11 'strang':3"
-bodyTs: "'37':159 '38':65 'acer':4,76,148 'also':15 'asus':59 'believ':152 'button':88,96,101,145,191 'cabl':42,125 'card':180 'connect':7,52 'convert':50 'desktop':84,108,142 'display':9,27,48 'dvi':32,40,41,47 'dvi-display':46 'dvi-dvi':39 'even':98,175 'everyth':153 'gpu':13,55 'graphic':179 'happen':166 'howev':126 'issu':163 'lg':19,134 'malform':183 'menu':95 'monitor':6,77,87,110,135,149,187 'month':170 'nobara':64,158 'none':92 'observ':68 'old':18 'port':10,35,49 'possibl':176 'power':78,100,117,124,136 'prevent':189 'previous':156 'probabl':164 'recent':169 'respond':91,102 'run':63 'rx6900xt':60 'secondari':26 'send':181 'signal':184 'start':165 'stay':111 'switch':81,105,139 'think':161 'togeth':43 'two':172 'unplug':122 'use':23 'vga':34 'via':8 'w2253tq':20 'way':115 'work':150,155,193 'xv340ckp':5"
+cross: false
+upVotes: 0
+downVotes: 0
+ranking: 1700820644
+visibility: "visible "
+apId: "https://aussie.zone/post/4287800"
+editedAt: null
+createdAt: DateTimeImmutable @1700740144 {#1609
date: 2023-11-23 12:49:04.0 +01:00
}
+__isInitialized__: true
…2
}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+parent: Proxies\__CG__\App\Entity\EntryComment {#1564 …}
+root: Proxies\__CG__\App\Entity\EntryComment {#1550 …}
+body: "I did not try replicating this behavior with a Windows install on my desktop. I did however perform a fresh install of Fedora 39 and that appeared to have fixed the issue, which is good news."
+lang: "en"
+isAdult: false
+favouriteCount: 0
+score: 0
+lastActive: DateTime @1701254877 {#1588
date: 2023-11-29 11:47:57.0 +01:00
}
+ip: null
+tags: null
+mentions: [
"@root@aussie.zone"
"@0x4E4F@infosec.pub"
]
+children: Doctrine\ORM\PersistentCollection {#1559 …}
+nested: Doctrine\ORM\PersistentCollection {#1565 …}
+votes: Doctrine\ORM\PersistentCollection {#1558 …}
+reports: Doctrine\ORM\PersistentCollection {#1557 …}
+favourites: Doctrine\ORM\PersistentCollection {#1621 …}
+notifications: Doctrine\ORM\PersistentCollection {#1613 …}
-id: 176410
-bodyTs: "'39':24 'appear':27 'behavior':7 'desktop':14 'fedora':23 'fix':30 'fresh':20 'good':35 'howev':17 'instal':11,21 'issu':32 'news':36 'perform':18 'replic':5 'tri':4 'window':10"
+ranking: 0
+commentCount: 0
+upVotes: 0
+downVotes: 0
+visibility: "visible "
+apId: "https://aussie.zone/comment/4709936"
+editedAt: null
+createdAt: DateTimeImmutable @1701254877 {#1566
date: 2023-11-29 11:47:57.0 +01:00
}
+"title": 176410
} |
|
Show voter details
|
11 |
DENIED
|
edit
|
App\Entity\EntryComment {#1563
+user: App\Entity\User {#260 …}
+entry: Proxies\__CG__\App\Entity\Entry {#1580
+user: App\Entity\User {#260 …}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+domain: Proxies\__CG__\App\Entity\Domain {#1723 …}
+slug: "Noticed-a-strange-occurrence-where-my-monitor-buttons-will-not"
+title: "Noticed a strange occurrence where my monitor buttons will not react to presses when certain conditions are met"
+url: null
+body: """
I have an Acer XV340CKP monitor connected via Display Port to my GPU. I also have a old LG W2253TQ that I use as a secondary display. It only has a DVI and VGA port. I have a DVI-DVI cable together with a DVI-Display Port converter to connect to my GPU, which is an Asus RX6900XT. I am running Nobara 38.\n
\n
I have observed that if I were to have my Acer monitor powered when I switch on my desktop, all the monitor buttons do not respond. None of the menu buttons, not even the power button responds. When I switch off the desktop, the monitor stays on. The only way to power it down is to unplug the power cable.\n
\n
However, if I were to only have the LG monitor powered when I switch on my desktop, all the buttons on the Acer monitor works.\n
\n
I believe everything was working previously in Nobara 37. I think this issue probably started happening in the recent month or two.\n
\n
Is this even possible, where the graphics card sends a malformed signal to the monitor and prevents the buttons from working?
"""
+type: "article"
+lang: "en"
+isOc: false
+hasEmbed: false
+commentCount: 10
+favouriteCount: 19
+score: 0
+isAdult: false
+sticky: false
+lastActive: DateTime @1701269493 {#2465
date: 2023-11-29 15:51:33.0 +01:00
}
+ip: null
+adaAmount: 0
+tags: null
+mentions: null
+comments: Doctrine\ORM\PersistentCollection {#1722 …}
+votes: Doctrine\ORM\PersistentCollection {#1726 …}
+reports: Doctrine\ORM\PersistentCollection {#1730 …}
+favourites: Doctrine\ORM\PersistentCollection {#1909 …}
+notifications: Doctrine\ORM\PersistentCollection {#2380 …}
+badges: Doctrine\ORM\PersistentCollection {#2389 …}
+children: [
1 => App\Entity\EntryComment {#1606
+user: App\Entity\User {#260 …}
+entry: Proxies\__CG__\App\Entity\Entry {#1580 …2}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+parent: Proxies\__CG__\App\Entity\EntryComment {#1651 …}
+root: Proxies\__CG__\App\Entity\EntryComment {#1651 …}
+body: "So I decided to bite the bullet and did a fresh install of Fedora 39 and that appeared to have made the issue go away. In the process of installing updates and configuring it the way I like, the monitor control buttons on both monitors response. So, it seems like the cause of the issue could have been a glitch during an update. Who knows? At least I know that it’s not a hardware issue (cross finders). :)"
+lang: "en"
+isAdult: false
+favouriteCount: 1
+score: 0
+lastActive: DateTime @1701254802 {#1440
date: 2023-11-29 11:46:42.0 +01:00
}
+ip: null
+tags: null
+mentions: [
"@root@aussie.zone"
"@TheCaconym@hexbear.net"
]
+children: Doctrine\ORM\PersistentCollection {#1649 …}
+nested: Doctrine\ORM\PersistentCollection {#1654 …}
+votes: Doctrine\ORM\PersistentCollection {#1679 …}
+reports: Doctrine\ORM\PersistentCollection {#1668 …}
+favourites: Doctrine\ORM\PersistentCollection {#1560 …}
+notifications: Doctrine\ORM\PersistentCollection {#1549 …}
-id: 176408
-bodyTs: "'39':15 'appear':18 'away':25 'bite':5 'bullet':7 'button':42 'caus':52 'configur':33 'control':41 'could':56 'cross':77 'decid':3 'fedora':14 'finder':78 'fresh':11 'glitch':60 'go':24 'hardwar':75 'instal':12,30 'issu':23,55,76 'know':65,69 'least':67 'like':38,50 'made':21 'monitor':40,45 'process':28 'respons':46 'seem':49 'updat':31,63 'way':36"
+ranking: 0
+commentCount: 0
+upVotes: 0
+downVotes: 0
+visibility: "visible "
+apId: "https://aussie.zone/comment/4709921"
+editedAt: null
+createdAt: DateTimeImmutable @1701254802 {#1703
date: 2023-11-29 11:46:42.0 +01:00
}
+"title": 176408
}
0 => App\Entity\EntryComment {#1563}
]
-id: 15886
-titleTs: "'button':8 'certain':15 'condit':16 'met':18 'monitor':7 'notic':1 'occurr':4 'press':13 'react':11 'strang':3"
-bodyTs: "'37':159 '38':65 'acer':4,76,148 'also':15 'asus':59 'believ':152 'button':88,96,101,145,191 'cabl':42,125 'card':180 'connect':7,52 'convert':50 'desktop':84,108,142 'display':9,27,48 'dvi':32,40,41,47 'dvi-display':46 'dvi-dvi':39 'even':98,175 'everyth':153 'gpu':13,55 'graphic':179 'happen':166 'howev':126 'issu':163 'lg':19,134 'malform':183 'menu':95 'monitor':6,77,87,110,135,149,187 'month':170 'nobara':64,158 'none':92 'observ':68 'old':18 'port':10,35,49 'possibl':176 'power':78,100,117,124,136 'prevent':189 'previous':156 'probabl':164 'recent':169 'respond':91,102 'run':63 'rx6900xt':60 'secondari':26 'send':181 'signal':184 'start':165 'stay':111 'switch':81,105,139 'think':161 'togeth':43 'two':172 'unplug':122 'use':23 'vga':34 'via':8 'w2253tq':20 'way':115 'work':150,155,193 'xv340ckp':5"
+cross: false
+upVotes: 0
+downVotes: 0
+ranking: 1700820644
+visibility: "visible "
+apId: "https://aussie.zone/post/4287800"
+editedAt: null
+createdAt: DateTimeImmutable @1700740144 {#1609
date: 2023-11-23 12:49:04.0 +01:00
}
+__isInitialized__: true
…2
}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+parent: Proxies\__CG__\App\Entity\EntryComment {#1564 …}
+root: Proxies\__CG__\App\Entity\EntryComment {#1550 …}
+body: "I did not try replicating this behavior with a Windows install on my desktop. I did however perform a fresh install of Fedora 39 and that appeared to have fixed the issue, which is good news."
+lang: "en"
+isAdult: false
+favouriteCount: 0
+score: 0
+lastActive: DateTime @1701254877 {#1588
date: 2023-11-29 11:47:57.0 +01:00
}
+ip: null
+tags: null
+mentions: [
"@root@aussie.zone"
"@0x4E4F@infosec.pub"
]
+children: Doctrine\ORM\PersistentCollection {#1559 …}
+nested: Doctrine\ORM\PersistentCollection {#1565 …}
+votes: Doctrine\ORM\PersistentCollection {#1558 …}
+reports: Doctrine\ORM\PersistentCollection {#1557 …}
+favourites: Doctrine\ORM\PersistentCollection {#1621 …}
+notifications: Doctrine\ORM\PersistentCollection {#1613 …}
-id: 176410
-bodyTs: "'39':24 'appear':27 'behavior':7 'desktop':14 'fedora':23 'fix':30 'fresh':20 'good':35 'howev':17 'instal':11,21 'issu':32 'news':36 'perform':18 'replic':5 'tri':4 'window':10"
+ranking: 0
+commentCount: 0
+upVotes: 0
+downVotes: 0
+visibility: "visible "
+apId: "https://aussie.zone/comment/4709936"
+editedAt: null
+createdAt: DateTimeImmutable @1701254877 {#1566
date: 2023-11-29 11:47:57.0 +01:00
}
+"title": 176410
} |
|
Show voter details
|
12 |
DENIED
|
moderate
|
App\Entity\EntryComment {#1563
+user: App\Entity\User {#260 …}
+entry: Proxies\__CG__\App\Entity\Entry {#1580
+user: App\Entity\User {#260 …}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+domain: Proxies\__CG__\App\Entity\Domain {#1723 …}
+slug: "Noticed-a-strange-occurrence-where-my-monitor-buttons-will-not"
+title: "Noticed a strange occurrence where my monitor buttons will not react to presses when certain conditions are met"
+url: null
+body: """
I have an Acer XV340CKP monitor connected via Display Port to my GPU. I also have a old LG W2253TQ that I use as a secondary display. It only has a DVI and VGA port. I have a DVI-DVI cable together with a DVI-Display Port converter to connect to my GPU, which is an Asus RX6900XT. I am running Nobara 38.\n
\n
I have observed that if I were to have my Acer monitor powered when I switch on my desktop, all the monitor buttons do not respond. None of the menu buttons, not even the power button responds. When I switch off the desktop, the monitor stays on. The only way to power it down is to unplug the power cable.\n
\n
However, if I were to only have the LG monitor powered when I switch on my desktop, all the buttons on the Acer monitor works.\n
\n
I believe everything was working previously in Nobara 37. I think this issue probably started happening in the recent month or two.\n
\n
Is this even possible, where the graphics card sends a malformed signal to the monitor and prevents the buttons from working?
"""
+type: "article"
+lang: "en"
+isOc: false
+hasEmbed: false
+commentCount: 10
+favouriteCount: 19
+score: 0
+isAdult: false
+sticky: false
+lastActive: DateTime @1701269493 {#2465
date: 2023-11-29 15:51:33.0 +01:00
}
+ip: null
+adaAmount: 0
+tags: null
+mentions: null
+comments: Doctrine\ORM\PersistentCollection {#1722 …}
+votes: Doctrine\ORM\PersistentCollection {#1726 …}
+reports: Doctrine\ORM\PersistentCollection {#1730 …}
+favourites: Doctrine\ORM\PersistentCollection {#1909 …}
+notifications: Doctrine\ORM\PersistentCollection {#2380 …}
+badges: Doctrine\ORM\PersistentCollection {#2389 …}
+children: [
1 => App\Entity\EntryComment {#1606
+user: App\Entity\User {#260 …}
+entry: Proxies\__CG__\App\Entity\Entry {#1580 …2}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+parent: Proxies\__CG__\App\Entity\EntryComment {#1651 …}
+root: Proxies\__CG__\App\Entity\EntryComment {#1651 …}
+body: "So I decided to bite the bullet and did a fresh install of Fedora 39 and that appeared to have made the issue go away. In the process of installing updates and configuring it the way I like, the monitor control buttons on both monitors response. So, it seems like the cause of the issue could have been a glitch during an update. Who knows? At least I know that it’s not a hardware issue (cross finders). :)"
+lang: "en"
+isAdult: false
+favouriteCount: 1
+score: 0
+lastActive: DateTime @1701254802 {#1440
date: 2023-11-29 11:46:42.0 +01:00
}
+ip: null
+tags: null
+mentions: [
"@root@aussie.zone"
"@TheCaconym@hexbear.net"
]
+children: Doctrine\ORM\PersistentCollection {#1649 …}
+nested: Doctrine\ORM\PersistentCollection {#1654 …}
+votes: Doctrine\ORM\PersistentCollection {#1679 …}
+reports: Doctrine\ORM\PersistentCollection {#1668 …}
+favourites: Doctrine\ORM\PersistentCollection {#1560 …}
+notifications: Doctrine\ORM\PersistentCollection {#1549 …}
-id: 176408
-bodyTs: "'39':15 'appear':18 'away':25 'bite':5 'bullet':7 'button':42 'caus':52 'configur':33 'control':41 'could':56 'cross':77 'decid':3 'fedora':14 'finder':78 'fresh':11 'glitch':60 'go':24 'hardwar':75 'instal':12,30 'issu':23,55,76 'know':65,69 'least':67 'like':38,50 'made':21 'monitor':40,45 'process':28 'respons':46 'seem':49 'updat':31,63 'way':36"
+ranking: 0
+commentCount: 0
+upVotes: 0
+downVotes: 0
+visibility: "visible "
+apId: "https://aussie.zone/comment/4709921"
+editedAt: null
+createdAt: DateTimeImmutable @1701254802 {#1703
date: 2023-11-29 11:46:42.0 +01:00
}
+"title": 176408
}
0 => App\Entity\EntryComment {#1563}
]
-id: 15886
-titleTs: "'button':8 'certain':15 'condit':16 'met':18 'monitor':7 'notic':1 'occurr':4 'press':13 'react':11 'strang':3"
-bodyTs: "'37':159 '38':65 'acer':4,76,148 'also':15 'asus':59 'believ':152 'button':88,96,101,145,191 'cabl':42,125 'card':180 'connect':7,52 'convert':50 'desktop':84,108,142 'display':9,27,48 'dvi':32,40,41,47 'dvi-display':46 'dvi-dvi':39 'even':98,175 'everyth':153 'gpu':13,55 'graphic':179 'happen':166 'howev':126 'issu':163 'lg':19,134 'malform':183 'menu':95 'monitor':6,77,87,110,135,149,187 'month':170 'nobara':64,158 'none':92 'observ':68 'old':18 'port':10,35,49 'possibl':176 'power':78,100,117,124,136 'prevent':189 'previous':156 'probabl':164 'recent':169 'respond':91,102 'run':63 'rx6900xt':60 'secondari':26 'send':181 'signal':184 'start':165 'stay':111 'switch':81,105,139 'think':161 'togeth':43 'two':172 'unplug':122 'use':23 'vga':34 'via':8 'w2253tq':20 'way':115 'work':150,155,193 'xv340ckp':5"
+cross: false
+upVotes: 0
+downVotes: 0
+ranking: 1700820644
+visibility: "visible "
+apId: "https://aussie.zone/post/4287800"
+editedAt: null
+createdAt: DateTimeImmutable @1700740144 {#1609
date: 2023-11-23 12:49:04.0 +01:00
}
+__isInitialized__: true
…2
}
+magazine: Proxies\__CG__\App\Entity\Magazine {#1573 …}
+image: null
+parent: Proxies\__CG__\App\Entity\EntryComment {#1564 …}
+root: Proxies\__CG__\App\Entity\EntryComment {#1550 …}
+body: "I did not try replicating this behavior with a Windows install on my desktop. I did however perform a fresh install of Fedora 39 and that appeared to have fixed the issue, which is good news."
+lang: "en"
+isAdult: false
+favouriteCount: 0
+score: 0
+lastActive: DateTime @1701254877 {#1588
date: 2023-11-29 11:47:57.0 +01:00
}
+ip: null
+tags: null
+mentions: [
"@root@aussie.zone"
"@0x4E4F@infosec.pub"
]
+children: Doctrine\ORM\PersistentCollection {#1559 …}
+nested: Doctrine\ORM\PersistentCollection {#1565 …}
+votes: Doctrine\ORM\PersistentCollection {#1558 …}
+reports: Doctrine\ORM\PersistentCollection {#1557 …}
+favourites: Doctrine\ORM\PersistentCollection {#1621 …}
+notifications: Doctrine\ORM\PersistentCollection {#1613 …}
-id: 176410
-bodyTs: "'39':24 'appear':27 'behavior':7 'desktop':14 'fedora':23 'fix':30 'fresh':20 'good':35 'howev':17 'instal':11,21 'issu':32 'news':36 'perform':18 'replic':5 'tri':4 'window':10"
+ranking: 0
+commentCount: 0
+upVotes: 0
+downVotes: 0
+visibility: "visible "
+apId: "https://aussie.zone/comment/4709936"
+editedAt: null
+createdAt: DateTimeImmutable @1701254877 {#1566
date: 2023-11-29 11:47:57.0 +01:00
}
+"title": 176410
} |
|
Show voter details
|
13 |
DENIED
|
ROLE_ADMIN
|
null |
|
Show voter details
|
14 |
DENIED
|
ROLE_MODERATOR
|
null |
|
Show voter details
|