GET https://kbin.spritesserver.nl/index.php/m/askelectronics@discuss.tchncs.de/t/2581/Housing-for-resistor/newest

Response
200 OK
IP
216.73.216.148
Profiled on
Token
a31561

Security

Token

There is no security token.

Firewall

main Name
Security enabled
Stateless

Configuration

Key Value
provider security.user.provider.concrete.app_user_provider
context main
entry_point App\Security\KbinAuthenticator
user_checker App\Security\UserChecker
access_denied_handler (none)
access_denied_url (none)
authenticators 
[
  "two_factor"
  "remember_me"
  "App\Security\KbinAuthenticator"
  "App\Security\FacebookAuthenticator"
  "App\Security\GoogleAuthenticator"
  "App\Security\GithubAuthenticator"
  "App\Security\KeycloakAuthenticator"
]

Listeners

Listener Duration Response 
Symfony\Component\Security\Http\Firewall\ChannelListener {#723
  -map: Symfony\Component\Security\Http\AccessMap {#722 …}
  -logger: Monolog\Logger {#783 …}
  -httpPort: 80
  -httpsPort: 443
}
 0.00 ms (none) 
Symfony\Component\Security\Http\Firewall\ContextListener {#706
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\TokenStorage {#1017 …}
  -sessionKey: "_security_main"
  -logger: Monolog\Logger {#783 …}
  -userProviders: Symfony\Component\DependencyInjection\Argument\RewindableGenerator {#705 …}
  -dispatcher: Symfony\Component\EventDispatcher\Debug\TraceableEventDispatcher {#747 …}
  -registered: false
  -trustResolver: Scheb\TwoFactorBundle\Security\Authentication\AuthenticationTrustResolver {#780 …}
  -sessionTrackerEnabler: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage::enableUsageTracking(): void {#703 …}
}
 1.40 ms (none) 
Symfony\Component\Security\Http\Firewall\AuthenticatorManagerListener {#584
  -authenticatorManager: Symfony\Component\Security\Http\Authentication\AuthenticatorManager {#595 …}
}
 0.00 ms (none) 
Scheb\TwoFactorBundle\Security\Http\Firewall\TwoFactorAccessListener {#582
  -twoFactorFirewallConfig: Scheb\TwoFactorBundle\Security\TwoFactor\TwoFactorFirewallConfig {#842 …}
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …}
  -twoFactorAccessDecider: Scheb\TwoFactorBundle\Security\Authorization\TwoFactorAccessDecider {#581 …}
}
 0.05 ms (none) 
Symfony\Component\Security\Http\Firewall\AccessListener {#579
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …}
  -accessDecisionManager: Symfony\Component\Security\Core\Authorization\TraceableAccessDecisionManager {#937 …}
  -map: Symfony\Component\Security\Http\AccessMap {#722 …}
}
 0.00 ms (none) 
Symfony\Component\Security\Http\Firewall\LogoutListener {#786
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …}
  -options: [
    "csrf_parameter" => "_csrf_token"
    "csrf_token_id" => "logout"
    "logout_path" => "app_logout"
  ]
  -httpUtils: Symfony\Component\Security\Http\HttpUtils {#841 …}
  -csrfTokenManager: Symfony\Component\Security\Csrf\CsrfTokenManager {#1015 …}
  -eventDispatcher: Symfony\Component\EventDispatcher\Debug\TraceableEventDispatcher {#747 …}
}
 0.00 ms (none)

Authenticators

No authenticators have been recorded. Check previous profiles on your authentication endpoint.

Access Decision

affirmative Strategy
# Voter class
1 
"Symfony\Component\Security\Core\Authorization\Voter\AuthenticatedVoter"
2 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
3 
"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
4 
"Symfony\Component\Security\Core\Authorization\Voter\ExpressionVoter"
5 
"App\Security\Voter\EntryCommentVoter"
6 
"App\Security\Voter\EntryVoter"
7 
"App\Security\Voter\MagazineVoter"
8 
"App\Security\Voter\MessageThreadVoter"
9 
"App\Security\Voter\MessageVoter"
10 
"App\Security\Voter\NotificationVoter"
11 
"App\Security\Voter\OAuth2UserConsentVoter"
12 
"App\Security\Voter\PostCommentVoter"
13 
"App\Security\Voter\PostVoter"
14 
"App\Security\Voter\UserVoter"

Access decision log

# Result Attributes Object
1 DENIED ROLE_USER 
null
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
2 DENIED moderate 
App\Entity\Entry {#2419
  +user: Proxies\__CG__\App\Entity\User {#1970 …}
  +magazine: App\Entity\Magazine {#265
    +icon: Proxies\__CG__\App\Entity\Image {#246 …}
    +name: "askelectronics@discuss.tchncs.de"
    +title: "askelectronics"
    +description: """
      **For questions about component-level electronic circuits, tools and equipment.**\n
      \n
      Rules\n
      -----\n
      \n
      1: Be nice.\n
      \n
      2: Be on-topic (eg: *Electronic*, not *electrical*).\n
      \n
      3: No commercial stuff, buying, selling or valuations.\n
      \n
      4: Be safe.\n
      \n
      ---
      """
    +rules: null
    +subscriptionsCount: 1
    +entryCount: 154
    +entryCommentCount: 1230
    +postCount: 1
    +postCommentCount: 4
    +isAdult: false
    +customCss: null
    +lastActive: DateTime @1729413608 {#275
      date: 2024-10-20 10:40:08.0 +02:00
    }
    +markedForDeletionAt: null
    +tags: null
    +moderators: Doctrine\ORM\PersistentCollection {#237 …}
    +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
    +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
    +entries: Doctrine\ORM\PersistentCollection {#180 …}
    +posts: Doctrine\ORM\PersistentCollection {#138 …}
    +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
    +bans: Doctrine\ORM\PersistentCollection {#117 …}
    +reports: Doctrine\ORM\PersistentCollection {#103 …}
    +badges: Doctrine\ORM\PersistentCollection {#81 …}
    +logs: Doctrine\ORM\PersistentCollection {#71 …}
    +awards: Doctrine\ORM\PersistentCollection {#1346 …}
    +categories: Doctrine\ORM\PersistentCollection {#1823 …}
    -id: 11
    +apId: "askelectronics@discuss.tchncs.de"
    +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
    +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
    +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
    +apInboxUrl: "https://discuss.tchncs.de/inbox"
    +apDomain: "discuss.tchncs.de"
    +apPreferredUsername: "askelectronics"
    +apDiscoverable: true
    +apManuallyApprovesFollowers: null
    +privateKey: null
    +publicKey: null
    +apFetchedAt: DateTime @1727247714 {#269
      date: 2024-09-25 09:01:54.0 +02:00
    }
    +apDeletedAt: null
    +apTimeoutAt: null
    +visibility: "visible             "
    +createdAt: DateTimeImmutable @1687144409 {#271
      date: 2023-06-19 05:13:29.0 +02:00
    }
  }
  +image: null
  +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
  +slug: "Housing-for-resistor"
  +title: "Housing for resistor?"
  +url: null
  +body: """
    I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
    \n
    I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
    """
  +type: "article"
  +lang: "en"
  +isOc: false
  +hasEmbed: false
  +commentCount: 8
  +favouriteCount: 5
  +score: 0
  +isAdult: false
  +sticky: false
  +lastActive: DateTime @1697273222 {#2414
    date: 2023-10-14 10:47:02.0 +02:00
  }
  +ip: null
  +adaAmount: 0
  +tags: null
  +mentions: null
  +comments: Doctrine\ORM\PersistentCollection {#1884 …}
  +votes: Doctrine\ORM\PersistentCollection {#1973 …}
  +reports: Doctrine\ORM\PersistentCollection {#1959 …}
  +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
  +badges: Doctrine\ORM\PersistentCollection {#2440 …}
  +children: []
  -id: 2581
  -titleTs: "'hous':1 'resistor':3"
  -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
  +cross: false
  +upVotes: 0
  +downVotes: 0
  +ranking: 1696440665
  +visibility: "visible             "
  +apId: "https://lemmy.world/post/6263071"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696389665 {#1793
    date: 2023-10-04 05:21:05.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS DENIED 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
3 DENIED edit 
App\Entity\Entry {#2419
  +user: Proxies\__CG__\App\Entity\User {#1970 …}
  +magazine: App\Entity\Magazine {#265
    +icon: Proxies\__CG__\App\Entity\Image {#246 …}
    +name: "askelectronics@discuss.tchncs.de"
    +title: "askelectronics"
    +description: """
      **For questions about component-level electronic circuits, tools and equipment.**\n
      \n
      Rules\n
      -----\n
      \n
      1: Be nice.\n
      \n
      2: Be on-topic (eg: *Electronic*, not *electrical*).\n
      \n
      3: No commercial stuff, buying, selling or valuations.\n
      \n
      4: Be safe.\n
      \n
      ---
      """
    +rules: null
    +subscriptionsCount: 1
    +entryCount: 154
    +entryCommentCount: 1230
    +postCount: 1
    +postCommentCount: 4
    +isAdult: false
    +customCss: null
    +lastActive: DateTime @1729413608 {#275
      date: 2024-10-20 10:40:08.0 +02:00
    }
    +markedForDeletionAt: null
    +tags: null
    +moderators: Doctrine\ORM\PersistentCollection {#237 …}
    +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
    +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
    +entries: Doctrine\ORM\PersistentCollection {#180 …}
    +posts: Doctrine\ORM\PersistentCollection {#138 …}
    +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
    +bans: Doctrine\ORM\PersistentCollection {#117 …}
    +reports: Doctrine\ORM\PersistentCollection {#103 …}
    +badges: Doctrine\ORM\PersistentCollection {#81 …}
    +logs: Doctrine\ORM\PersistentCollection {#71 …}
    +awards: Doctrine\ORM\PersistentCollection {#1346 …}
    +categories: Doctrine\ORM\PersistentCollection {#1823 …}
    -id: 11
    +apId: "askelectronics@discuss.tchncs.de"
    +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
    +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
    +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
    +apInboxUrl: "https://discuss.tchncs.de/inbox"
    +apDomain: "discuss.tchncs.de"
    +apPreferredUsername: "askelectronics"
    +apDiscoverable: true
    +apManuallyApprovesFollowers: null
    +privateKey: null
    +publicKey: null
    +apFetchedAt: DateTime @1727247714 {#269
      date: 2024-09-25 09:01:54.0 +02:00
    }
    +apDeletedAt: null
    +apTimeoutAt: null
    +visibility: "visible             "
    +createdAt: DateTimeImmutable @1687144409 {#271
      date: 2023-06-19 05:13:29.0 +02:00
    }
  }
  +image: null
  +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
  +slug: "Housing-for-resistor"
  +title: "Housing for resistor?"
  +url: null
  +body: """
    I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
    \n
    I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
    """
  +type: "article"
  +lang: "en"
  +isOc: false
  +hasEmbed: false
  +commentCount: 8
  +favouriteCount: 5
  +score: 0
  +isAdult: false
  +sticky: false
  +lastActive: DateTime @1697273222 {#2414
    date: 2023-10-14 10:47:02.0 +02:00
  }
  +ip: null
  +adaAmount: 0
  +tags: null
  +mentions: null
  +comments: Doctrine\ORM\PersistentCollection {#1884 …}
  +votes: Doctrine\ORM\PersistentCollection {#1973 …}
  +reports: Doctrine\ORM\PersistentCollection {#1959 …}
  +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
  +badges: Doctrine\ORM\PersistentCollection {#2440 …}
  +children: []
  -id: 2581
  -titleTs: "'hous':1 'resistor':3"
  -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
  +cross: false
  +upVotes: 0
  +downVotes: 0
  +ranking: 1696440665
  +visibility: "visible             "
  +apId: "https://lemmy.world/post/6263071"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696389665 {#1793
    date: 2023-10-04 05:21:05.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS DENIED 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
4 DENIED moderate 
App\Entity\Entry {#2419
  +user: Proxies\__CG__\App\Entity\User {#1970 …}
  +magazine: App\Entity\Magazine {#265
    +icon: Proxies\__CG__\App\Entity\Image {#246 …}
    +name: "askelectronics@discuss.tchncs.de"
    +title: "askelectronics"
    +description: """
      **For questions about component-level electronic circuits, tools and equipment.**\n
      \n
      Rules\n
      -----\n
      \n
      1: Be nice.\n
      \n
      2: Be on-topic (eg: *Electronic*, not *electrical*).\n
      \n
      3: No commercial stuff, buying, selling or valuations.\n
      \n
      4: Be safe.\n
      \n
      ---
      """
    +rules: null
    +subscriptionsCount: 1
    +entryCount: 154
    +entryCommentCount: 1230
    +postCount: 1
    +postCommentCount: 4
    +isAdult: false
    +customCss: null
    +lastActive: DateTime @1729413608 {#275
      date: 2024-10-20 10:40:08.0 +02:00
    }
    +markedForDeletionAt: null
    +tags: null
    +moderators: Doctrine\ORM\PersistentCollection {#237 …}
    +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
    +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
    +entries: Doctrine\ORM\PersistentCollection {#180 …}
    +posts: Doctrine\ORM\PersistentCollection {#138 …}
    +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
    +bans: Doctrine\ORM\PersistentCollection {#117 …}
    +reports: Doctrine\ORM\PersistentCollection {#103 …}
    +badges: Doctrine\ORM\PersistentCollection {#81 …}
    +logs: Doctrine\ORM\PersistentCollection {#71 …}
    +awards: Doctrine\ORM\PersistentCollection {#1346 …}
    +categories: Doctrine\ORM\PersistentCollection {#1823 …}
    -id: 11
    +apId: "askelectronics@discuss.tchncs.de"
    +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
    +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
    +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
    +apInboxUrl: "https://discuss.tchncs.de/inbox"
    +apDomain: "discuss.tchncs.de"
    +apPreferredUsername: "askelectronics"
    +apDiscoverable: true
    +apManuallyApprovesFollowers: null
    +privateKey: null
    +publicKey: null
    +apFetchedAt: DateTime @1727247714 {#269
      date: 2024-09-25 09:01:54.0 +02:00
    }
    +apDeletedAt: null
    +apTimeoutAt: null
    +visibility: "visible             "
    +createdAt: DateTimeImmutable @1687144409 {#271
      date: 2023-06-19 05:13:29.0 +02:00
    }
  }
  +image: null
  +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
  +slug: "Housing-for-resistor"
  +title: "Housing for resistor?"
  +url: null
  +body: """
    I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
    \n
    I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
    """
  +type: "article"
  +lang: "en"
  +isOc: false
  +hasEmbed: false
  +commentCount: 8
  +favouriteCount: 5
  +score: 0
  +isAdult: false
  +sticky: false
  +lastActive: DateTime @1697273222 {#2414
    date: 2023-10-14 10:47:02.0 +02:00
  }
  +ip: null
  +adaAmount: 0
  +tags: null
  +mentions: null
  +comments: Doctrine\ORM\PersistentCollection {#1884 …}
  +votes: Doctrine\ORM\PersistentCollection {#1973 …}
  +reports: Doctrine\ORM\PersistentCollection {#1959 …}
  +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
  +badges: Doctrine\ORM\PersistentCollection {#2440 …}
  +children: []
  -id: 2581
  -titleTs: "'hous':1 'resistor':3"
  -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
  +cross: false
  +upVotes: 0
  +downVotes: 0
  +ranking: 1696440665
  +visibility: "visible             "
  +apId: "https://lemmy.world/post/6263071"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696389665 {#1793
    date: 2023-10-04 05:21:05.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS DENIED 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
5 DENIED ROLE_USER 
null
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
6 DENIED moderate 
App\Entity\EntryComment {#4027
  +user: App\Entity\User {#3975 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: null
  +root: null
  +body: """
    I would make sure the solder connection between wire and resistor is very solid, and then encase the stuff in heat shrink tubing with glue in it. (Adhesive Lined Heat Shrink Tubing)\n
    \n
    If it’s good enough for Nasa, it will work for your car: [makezine.com/…/how-to-splice-wire-to-nasa-standar…](https://makezine.com/article/technology/computers-mobile/how-to-splice-wire-to-nasa-standards/)
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1697273222 {#4036
    date: 2023-10-14 10:47:02.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4025 …}
  +nested: Doctrine\ORM\PersistentCollection {#4023 …}
  +votes: Doctrine\ORM\PersistentCollection {#4021 …}
  +reports: Doctrine\ORM\PersistentCollection {#4019 …}
  +favourites: Doctrine\ORM\PersistentCollection {#3987 …}
  +notifications: Doctrine\ORM\PersistentCollection {#3991 …}
  -id: 48123
  -bodyTs: "'/article/technology/computers-mobile/how-to-splice-wire-to-nasa-standards/)':50 '/how-to-splice-wire-to-nasa-standar':47 'adhes':28 'car':45 'connect':7 'encas':17 'enough':37 'glue':25 'good':36 'heat':21,30 'line':29 'make':3 'makezine.com':46,49 'makezine.com/article/technology/computers-mobile/how-to-splice-wire-to-nasa-standards/)':48 'nasa':39 'resistor':11 'shrink':22,31 'solder':6 'solid':14 'stuff':19 'sure':4 'tube':23,32 'wire':9 'work':42 'would':2"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4521080"
  +editedAt: null
  +createdAt: DateTimeImmutable @1697273222 {#3972
    date: 2023-10-14 10:47:02.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
7 DENIED edit 
App\Entity\EntryComment {#4027
  +user: App\Entity\User {#3975 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: null
  +root: null
  +body: """
    I would make sure the solder connection between wire and resistor is very solid, and then encase the stuff in heat shrink tubing with glue in it. (Adhesive Lined Heat Shrink Tubing)\n
    \n
    If it’s good enough for Nasa, it will work for your car: [makezine.com/…/how-to-splice-wire-to-nasa-standar…](https://makezine.com/article/technology/computers-mobile/how-to-splice-wire-to-nasa-standards/)
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1697273222 {#4036
    date: 2023-10-14 10:47:02.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4025 …}
  +nested: Doctrine\ORM\PersistentCollection {#4023 …}
  +votes: Doctrine\ORM\PersistentCollection {#4021 …}
  +reports: Doctrine\ORM\PersistentCollection {#4019 …}
  +favourites: Doctrine\ORM\PersistentCollection {#3987 …}
  +notifications: Doctrine\ORM\PersistentCollection {#3991 …}
  -id: 48123
  -bodyTs: "'/article/technology/computers-mobile/how-to-splice-wire-to-nasa-standards/)':50 '/how-to-splice-wire-to-nasa-standar':47 'adhes':28 'car':45 'connect':7 'encas':17 'enough':37 'glue':25 'good':36 'heat':21,30 'line':29 'make':3 'makezine.com':46,49 'makezine.com/article/technology/computers-mobile/how-to-splice-wire-to-nasa-standards/)':48 'nasa':39 'resistor':11 'shrink':22,31 'solder':6 'solid':14 'stuff':19 'sure':4 'tube':23,32 'wire':9 'work':42 'would':2"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4521080"
  +editedAt: null
  +createdAt: DateTimeImmutable @1697273222 {#3972
    date: 2023-10-14 10:47:02.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
8 DENIED moderate 
App\Entity\EntryComment {#4027
  +user: App\Entity\User {#3975 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: null
  +root: null
  +body: """
    I would make sure the solder connection between wire and resistor is very solid, and then encase the stuff in heat shrink tubing with glue in it. (Adhesive Lined Heat Shrink Tubing)\n
    \n
    If it’s good enough for Nasa, it will work for your car: [makezine.com/…/how-to-splice-wire-to-nasa-standar…](https://makezine.com/article/technology/computers-mobile/how-to-splice-wire-to-nasa-standards/)
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1697273222 {#4036
    date: 2023-10-14 10:47:02.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4025 …}
  +nested: Doctrine\ORM\PersistentCollection {#4023 …}
  +votes: Doctrine\ORM\PersistentCollection {#4021 …}
  +reports: Doctrine\ORM\PersistentCollection {#4019 …}
  +favourites: Doctrine\ORM\PersistentCollection {#3987 …}
  +notifications: Doctrine\ORM\PersistentCollection {#3991 …}
  -id: 48123
  -bodyTs: "'/article/technology/computers-mobile/how-to-splice-wire-to-nasa-standards/)':50 '/how-to-splice-wire-to-nasa-standar':47 'adhes':28 'car':45 'connect':7 'encas':17 'enough':37 'glue':25 'good':36 'heat':21,30 'line':29 'make':3 'makezine.com':46,49 'makezine.com/article/technology/computers-mobile/how-to-splice-wire-to-nasa-standards/)':48 'nasa':39 'resistor':11 'shrink':22,31 'solder':6 'solid':14 'stuff':19 'sure':4 'tube':23,32 'wire':9 'work':42 'would':2"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4521080"
  +editedAt: null
  +createdAt: DateTimeImmutable @1697273222 {#3972
    date: 2023-10-14 10:47:02.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
9 DENIED ROLE_USER 
null
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
10 DENIED moderate 
App\Entity\EntryComment {#4059
  +user: App\Entity\User {#4048 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: null
  +root: null
  +body: """
    You can get panel mount resistors. They are usually rated at way higher wattage though.\n
    \n
    I would probably just heat shrink the resistor. Your harness should be reasonably secure anyway.\n
    \n
    I would question why you need a 2.2ohm 1/2w resistor in a harness in the first place though.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 2
  +score: 0
  +lastActive: DateTime @1696392905 {#4065
    date: 2023-10-04 06:15:05.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4064 …}
  +nested: Doctrine\ORM\PersistentCollection {#4063 …}
  +votes: Doctrine\ORM\PersistentCollection {#4054 …}
  +reports: Doctrine\ORM\PersistentCollection {#4057 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4052 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4050 …}
  -id: 30814
  -bodyTs: "'1/2w':40 '2.2':38 'anyway':30 'first':47 'get':3 'har':25,44 'heat':20 'higher':13 'mount':5 'need':36 'ohm':39 'panel':4 'place':48 'probabl':18 'question':33 'rate':10 'reason':28 'resistor':6,23,41 'secur':29 'shrink':21 'though':15,49 'usual':9 'wattag':14 'way':12 'would':17,32"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/3541699"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392413 {#4070
    date: 2023-10-04 06:06:53.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
11 DENIED edit 
App\Entity\EntryComment {#4059
  +user: App\Entity\User {#4048 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: null
  +root: null
  +body: """
    You can get panel mount resistors. They are usually rated at way higher wattage though.\n
    \n
    I would probably just heat shrink the resistor. Your harness should be reasonably secure anyway.\n
    \n
    I would question why you need a 2.2ohm 1/2w resistor in a harness in the first place though.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 2
  +score: 0
  +lastActive: DateTime @1696392905 {#4065
    date: 2023-10-04 06:15:05.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4064 …}
  +nested: Doctrine\ORM\PersistentCollection {#4063 …}
  +votes: Doctrine\ORM\PersistentCollection {#4054 …}
  +reports: Doctrine\ORM\PersistentCollection {#4057 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4052 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4050 …}
  -id: 30814
  -bodyTs: "'1/2w':40 '2.2':38 'anyway':30 'first':47 'get':3 'har':25,44 'heat':20 'higher':13 'mount':5 'need':36 'ohm':39 'panel':4 'place':48 'probabl':18 'question':33 'rate':10 'reason':28 'resistor':6,23,41 'secur':29 'shrink':21 'though':15,49 'usual':9 'wattag':14 'way':12 'would':17,32"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/3541699"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392413 {#4070
    date: 2023-10-04 06:06:53.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
12 DENIED moderate 
App\Entity\EntryComment {#4059
  +user: App\Entity\User {#4048 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: null
  +root: null
  +body: """
    You can get panel mount resistors. They are usually rated at way higher wattage though.\n
    \n
    I would probably just heat shrink the resistor. Your harness should be reasonably secure anyway.\n
    \n
    I would question why you need a 2.2ohm 1/2w resistor in a harness in the first place though.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 2
  +score: 0
  +lastActive: DateTime @1696392905 {#4065
    date: 2023-10-04 06:15:05.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4064 …}
  +nested: Doctrine\ORM\PersistentCollection {#4063 …}
  +votes: Doctrine\ORM\PersistentCollection {#4054 …}
  +reports: Doctrine\ORM\PersistentCollection {#4057 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4052 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4050 …}
  -id: 30814
  -bodyTs: "'1/2w':40 '2.2':38 'anyway':30 'first':47 'get':3 'har':25,44 'heat':20 'higher':13 'mount':5 'need':36 'ohm':39 'panel':4 'place':48 'probabl':18 'question':33 'rate':10 'reason':28 'resistor':6,23,41 'secur':29 'shrink':21 'though':15,49 'usual':9 'wattag':14 'way':12 'would':17,32"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/3541699"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392413 {#4070
    date: 2023-10-04 06:06:53.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
13 DENIED ROLE_USER 
null
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
14 DENIED moderate 
App\Entity\EntryComment {#4318
  +user: Proxies\__CG__\App\Entity\User {#1970 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: App\Entity\EntryComment {#4059
    +user: App\Entity\User {#4048 …}
    +entry: App\Entity\Entry {#2419}
    +magazine: App\Entity\Magazine {#265}
    +image: null
    +parent: null
    +root: null
    +body: """
      You can get panel mount resistors. They are usually rated at way higher wattage though.\n
      \n
      I would probably just heat shrink the resistor. Your harness should be reasonably secure anyway.\n
      \n
      I would question why you need a 2.2ohm 1/2w resistor in a harness in the first place though.
      """
    +lang: "en"
    +isAdult: false
    +favouriteCount: 2
    +score: 0
    +lastActive: DateTime @1696392905 {#4065
      date: 2023-10-04 06:15:05.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4064 …}
    +nested: Doctrine\ORM\PersistentCollection {#4063 …}
    +votes: Doctrine\ORM\PersistentCollection {#4054 …}
    +reports: Doctrine\ORM\PersistentCollection {#4057 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4052 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4050 …}
    -id: 30814
    -bodyTs: "'1/2w':40 '2.2':38 'anyway':30 'first':47 'get':3 'har':25,44 'heat':20 'higher':13 'mount':5 'need':36 'ohm':39 'panel':4 'place':48 'probabl':18 'question':33 'rate':10 'reason':28 'resistor':6,23,41 'secur':29 'shrink':21 'though':15,49 'usual':9 'wattag':14 'way':12 'would':17,32"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/comment/3541699"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696392413 {#4070
      date: 2023-10-04 06:06:53.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4059}
  +body: "To fool the computer into not throwing an airbag light and disabling all the airbags. I have an early 00s car that swings double duty as street car and track car and when I pull the driver’s seat out for a race seat, the airbag light shows up. Then I go through a rigamarole to reset the light once everything is swapped and plugged in again. It’s a common mod, but just people usually cut up the harness. I’d like to keep things neat and tidy so I bought the seat side of the harness and want to cut the plug off, solder on the resistor and plug it in."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 4
  +score: 0
  +lastActive: DateTime @1696392904 {#4316
    date: 2023-10-04 06:15:04.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@benzmacx16v@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4319 …}
  +nested: Doctrine\ORM\PersistentCollection {#4321 …}
  +votes: Doctrine\ORM\PersistentCollection {#4323 …}
  +reports: Doctrine\ORM\PersistentCollection {#4325 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4327 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4329 …}
  -id: 30815
  -bodyTs: "'00s':20 'airbag':9,15,46 'bought':92 'car':21,28,31 'common':71 'comput':4 'cut':77,102 'd':82 'disabl':12 'doubl':24 'driver':37 'duti':25 'earli':19 'everyth':61 'fool':2 'go':52 'har':80,98 'keep':85 'light':10,47,59 'like':83 'mod':72 'neat':87 'peopl':75 'plug':65,104,111 'pull':35 'race':43 'reset':57 'resistor':109 'rigamarol':55 'seat':39,44,94 'show':48 'side':95 'solder':106 'street':27 'swap':63 'swing':23 'thing':86 'throw':7 'tidi':89 'track':30 'usual':76 'want':100"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4113703"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392904 {#4317
    date: 2023-10-04 06:15:04.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
15 DENIED edit 
App\Entity\EntryComment {#4318
  +user: Proxies\__CG__\App\Entity\User {#1970 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: App\Entity\EntryComment {#4059
    +user: App\Entity\User {#4048 …}
    +entry: App\Entity\Entry {#2419}
    +magazine: App\Entity\Magazine {#265}
    +image: null
    +parent: null
    +root: null
    +body: """
      You can get panel mount resistors. They are usually rated at way higher wattage though.\n
      \n
      I would probably just heat shrink the resistor. Your harness should be reasonably secure anyway.\n
      \n
      I would question why you need a 2.2ohm 1/2w resistor in a harness in the first place though.
      """
    +lang: "en"
    +isAdult: false
    +favouriteCount: 2
    +score: 0
    +lastActive: DateTime @1696392905 {#4065
      date: 2023-10-04 06:15:05.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4064 …}
    +nested: Doctrine\ORM\PersistentCollection {#4063 …}
    +votes: Doctrine\ORM\PersistentCollection {#4054 …}
    +reports: Doctrine\ORM\PersistentCollection {#4057 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4052 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4050 …}
    -id: 30814
    -bodyTs: "'1/2w':40 '2.2':38 'anyway':30 'first':47 'get':3 'har':25,44 'heat':20 'higher':13 'mount':5 'need':36 'ohm':39 'panel':4 'place':48 'probabl':18 'question':33 'rate':10 'reason':28 'resistor':6,23,41 'secur':29 'shrink':21 'though':15,49 'usual':9 'wattag':14 'way':12 'would':17,32"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/comment/3541699"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696392413 {#4070
      date: 2023-10-04 06:06:53.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4059}
  +body: "To fool the computer into not throwing an airbag light and disabling all the airbags. I have an early 00s car that swings double duty as street car and track car and when I pull the driver’s seat out for a race seat, the airbag light shows up. Then I go through a rigamarole to reset the light once everything is swapped and plugged in again. It’s a common mod, but just people usually cut up the harness. I’d like to keep things neat and tidy so I bought the seat side of the harness and want to cut the plug off, solder on the resistor and plug it in."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 4
  +score: 0
  +lastActive: DateTime @1696392904 {#4316
    date: 2023-10-04 06:15:04.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@benzmacx16v@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4319 …}
  +nested: Doctrine\ORM\PersistentCollection {#4321 …}
  +votes: Doctrine\ORM\PersistentCollection {#4323 …}
  +reports: Doctrine\ORM\PersistentCollection {#4325 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4327 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4329 …}
  -id: 30815
  -bodyTs: "'00s':20 'airbag':9,15,46 'bought':92 'car':21,28,31 'common':71 'comput':4 'cut':77,102 'd':82 'disabl':12 'doubl':24 'driver':37 'duti':25 'earli':19 'everyth':61 'fool':2 'go':52 'har':80,98 'keep':85 'light':10,47,59 'like':83 'mod':72 'neat':87 'peopl':75 'plug':65,104,111 'pull':35 'race':43 'reset':57 'resistor':109 'rigamarol':55 'seat':39,44,94 'show':48 'side':95 'solder':106 'street':27 'swap':63 'swing':23 'thing':86 'throw':7 'tidi':89 'track':30 'usual':76 'want':100"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4113703"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392904 {#4317
    date: 2023-10-04 06:15:04.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
16 DENIED moderate 
App\Entity\EntryComment {#4318
  +user: Proxies\__CG__\App\Entity\User {#1970 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: App\Entity\EntryComment {#4059
    +user: App\Entity\User {#4048 …}
    +entry: App\Entity\Entry {#2419}
    +magazine: App\Entity\Magazine {#265}
    +image: null
    +parent: null
    +root: null
    +body: """
      You can get panel mount resistors. They are usually rated at way higher wattage though.\n
      \n
      I would probably just heat shrink the resistor. Your harness should be reasonably secure anyway.\n
      \n
      I would question why you need a 2.2ohm 1/2w resistor in a harness in the first place though.
      """
    +lang: "en"
    +isAdult: false
    +favouriteCount: 2
    +score: 0
    +lastActive: DateTime @1696392905 {#4065
      date: 2023-10-04 06:15:05.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4064 …}
    +nested: Doctrine\ORM\PersistentCollection {#4063 …}
    +votes: Doctrine\ORM\PersistentCollection {#4054 …}
    +reports: Doctrine\ORM\PersistentCollection {#4057 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4052 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4050 …}
    -id: 30814
    -bodyTs: "'1/2w':40 '2.2':38 'anyway':30 'first':47 'get':3 'har':25,44 'heat':20 'higher':13 'mount':5 'need':36 'ohm':39 'panel':4 'place':48 'probabl':18 'question':33 'rate':10 'reason':28 'resistor':6,23,41 'secur':29 'shrink':21 'though':15,49 'usual':9 'wattag':14 'way':12 'would':17,32"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/comment/3541699"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696392413 {#4070
      date: 2023-10-04 06:06:53.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4059}
  +body: "To fool the computer into not throwing an airbag light and disabling all the airbags. I have an early 00s car that swings double duty as street car and track car and when I pull the driver’s seat out for a race seat, the airbag light shows up. Then I go through a rigamarole to reset the light once everything is swapped and plugged in again. It’s a common mod, but just people usually cut up the harness. I’d like to keep things neat and tidy so I bought the seat side of the harness and want to cut the plug off, solder on the resistor and plug it in."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 4
  +score: 0
  +lastActive: DateTime @1696392904 {#4316
    date: 2023-10-04 06:15:04.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@benzmacx16v@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4319 …}
  +nested: Doctrine\ORM\PersistentCollection {#4321 …}
  +votes: Doctrine\ORM\PersistentCollection {#4323 …}
  +reports: Doctrine\ORM\PersistentCollection {#4325 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4327 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4329 …}
  -id: 30815
  -bodyTs: "'00s':20 'airbag':9,15,46 'bought':92 'car':21,28,31 'common':71 'comput':4 'cut':77,102 'd':82 'disabl':12 'doubl':24 'driver':37 'duti':25 'earli':19 'everyth':61 'fool':2 'go':52 'har':80,98 'keep':85 'light':10,47,59 'like':83 'mod':72 'neat':87 'peopl':75 'plug':65,104,111 'pull':35 'race':43 'reset':57 'resistor':109 'rigamarol':55 'seat':39,44,94 'show':48 'side':95 'solder':106 'street':27 'swap':63 'swing':23 'thing':86 'throw':7 'tidi':89 'track':30 'usual':76 'want':100"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4113703"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392904 {#4317
    date: 2023-10-04 06:15:04.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
17 DENIED ROLE_USER 
null
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
18 DENIED moderate 
App\Entity\EntryComment {#4144
  +user: App\Entity\User {#4157 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: null
  +root: null
  +body: "Look for a higher quality resistor? There will definitely be something in your range that is made for durability."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 0
  +score: 0
  +lastActive: DateTime @1696391068 {#4139
    date: 2023-10-04 05:44:28.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4145 …}
  +nested: Doctrine\ORM\PersistentCollection {#4147 …}
  +votes: Doctrine\ORM\PersistentCollection {#4149 …}
  +reports: Doctrine\ORM\PersistentCollection {#4151 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4153 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4155 …}
  -id: 30809
  -bodyTs: "'definit':9 'durabl':19 'higher':4 'look':1 'made':17 'qualiti':5 'rang':14 'resistor':6 'someth':11"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4113348"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696391068 {#4140
    date: 2023-10-04 05:44:28.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
19 DENIED edit 
App\Entity\EntryComment {#4144
  +user: App\Entity\User {#4157 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: null
  +root: null
  +body: "Look for a higher quality resistor? There will definitely be something in your range that is made for durability."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 0
  +score: 0
  +lastActive: DateTime @1696391068 {#4139
    date: 2023-10-04 05:44:28.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4145 …}
  +nested: Doctrine\ORM\PersistentCollection {#4147 …}
  +votes: Doctrine\ORM\PersistentCollection {#4149 …}
  +reports: Doctrine\ORM\PersistentCollection {#4151 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4153 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4155 …}
  -id: 30809
  -bodyTs: "'definit':9 'durabl':19 'higher':4 'look':1 'made':17 'qualiti':5 'rang':14 'resistor':6 'someth':11"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4113348"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696391068 {#4140
    date: 2023-10-04 05:44:28.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
20 DENIED moderate 
App\Entity\EntryComment {#4144
  +user: App\Entity\User {#4157 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: null
  +root: null
  +body: "Look for a higher quality resistor? There will definitely be something in your range that is made for durability."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 0
  +score: 0
  +lastActive: DateTime @1696391068 {#4139
    date: 2023-10-04 05:44:28.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4145 …}
  +nested: Doctrine\ORM\PersistentCollection {#4147 …}
  +votes: Doctrine\ORM\PersistentCollection {#4149 …}
  +reports: Doctrine\ORM\PersistentCollection {#4151 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4153 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4155 …}
  -id: 30809
  -bodyTs: "'definit':9 'durabl':19 'higher':4 'look':1 'made':17 'qualiti':5 'rang':14 'resistor':6 'someth':11"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4113348"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696391068 {#4140
    date: 2023-10-04 05:44:28.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
21 DENIED ROLE_USER 
null
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
22 DENIED moderate 
App\Entity\EntryComment {#4219
  +user: App\Entity\User {#4232 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: null
  +root: null
  +body: """
    You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
    I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696393522 {#4214
    date: 2023-10-04 06:25:22.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4220 …}
  +nested: Doctrine\ORM\PersistentCollection {#4222 …}
  +votes: Doctrine\ORM\PersistentCollection {#4224 …}
  +reports: Doctrine\ORM\PersistentCollection {#4226 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4228 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4230 …}
  -id: 30804
  -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/3541321"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696390680 {#4215
    date: 2023-10-04 05:38:00.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
23 DENIED edit 
App\Entity\EntryComment {#4219
  +user: App\Entity\User {#4232 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: null
  +root: null
  +body: """
    You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
    I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696393522 {#4214
    date: 2023-10-04 06:25:22.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4220 …}
  +nested: Doctrine\ORM\PersistentCollection {#4222 …}
  +votes: Doctrine\ORM\PersistentCollection {#4224 …}
  +reports: Doctrine\ORM\PersistentCollection {#4226 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4228 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4230 …}
  -id: 30804
  -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/3541321"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696390680 {#4215
    date: 2023-10-04 05:38:00.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
24 DENIED moderate 
App\Entity\EntryComment {#4219
  +user: App\Entity\User {#4232 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: null
  +root: null
  +body: """
    You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
    I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696393522 {#4214
    date: 2023-10-04 06:25:22.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4220 …}
  +nested: Doctrine\ORM\PersistentCollection {#4222 …}
  +votes: Doctrine\ORM\PersistentCollection {#4224 …}
  +reports: Doctrine\ORM\PersistentCollection {#4226 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4228 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4230 …}
  -id: 30804
  -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/3541321"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696390680 {#4215
    date: 2023-10-04 05:38:00.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
25 DENIED ROLE_USER 
null
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
26 DENIED moderate 
App\Entity\EntryComment {#4299
  +user: Proxies\__CG__\App\Entity\User {#4302 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: App\Entity\EntryComment {#4219
    +user: App\Entity\User {#4232 …}
    +entry: App\Entity\Entry {#2419}
    +magazine: App\Entity\Magazine {#265}
    +image: null
    +parent: null
    +root: null
    +body: """
      You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
      I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
      """
    +lang: "en"
    +isAdult: false
    +favouriteCount: 1
    +score: 0
    +lastActive: DateTime @1696393522 {#4214
      date: 2023-10-04 06:25:22.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4220 …}
    +nested: Doctrine\ORM\PersistentCollection {#4222 …}
    +votes: Doctrine\ORM\PersistentCollection {#4224 …}
    +reports: Doctrine\ORM\PersistentCollection {#4226 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4228 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4230 …}
    -id: 30804
    -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/comment/3541321"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696390680 {#4215
      date: 2023-10-04 05:38:00.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4219}
  +body: """
    Adding on to this line of thinking, maybe a thin plastic tube and epoxy to encase it with the solder joints. (Bonus points for using thermal epoxy, since it is a resistor after all.)\n
    \n
    I have seen Bigclive on YouTube encase resistors and a diode rectifier in standard epoxy for use in lighting, so heat probably won’t be an issue now that I think of it.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696392230 {#4298
    date: 2023-10-04 06:03:50.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@cmnybo@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4306 …}
  +nested: Doctrine\ORM\PersistentCollection {#4308 …}
  +votes: Doctrine\ORM\PersistentCollection {#4304 …}
  +reports: Doctrine\ORM\PersistentCollection {#4310 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4312 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4314 …}
  -id: 30812
  -bodyTs: "'ad':1 'bigcliv':38 'bonus':22 'diod':45 'encas':16,41 'epoxi':14,27,49 'heat':55 'issu':61 'joint':21 'light':53 'line':5 'mayb':8 'plastic':11 'point':23 'probabl':56 'rectifi':46 'resistor':32,42 'seen':37 'sinc':28 'solder':20 'standard':48 'thermal':26 'thin':10 'think':7,65 'tube':12 'use':25,51 'won':57 'youtub':40"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.ca/comment/3638132"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392230 {#4295
    date: 2023-10-04 06:03:50.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
27 DENIED edit 
App\Entity\EntryComment {#4299
  +user: Proxies\__CG__\App\Entity\User {#4302 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: App\Entity\EntryComment {#4219
    +user: App\Entity\User {#4232 …}
    +entry: App\Entity\Entry {#2419}
    +magazine: App\Entity\Magazine {#265}
    +image: null
    +parent: null
    +root: null
    +body: """
      You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
      I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
      """
    +lang: "en"
    +isAdult: false
    +favouriteCount: 1
    +score: 0
    +lastActive: DateTime @1696393522 {#4214
      date: 2023-10-04 06:25:22.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4220 …}
    +nested: Doctrine\ORM\PersistentCollection {#4222 …}
    +votes: Doctrine\ORM\PersistentCollection {#4224 …}
    +reports: Doctrine\ORM\PersistentCollection {#4226 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4228 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4230 …}
    -id: 30804
    -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/comment/3541321"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696390680 {#4215
      date: 2023-10-04 05:38:00.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4219}
  +body: """
    Adding on to this line of thinking, maybe a thin plastic tube and epoxy to encase it with the solder joints. (Bonus points for using thermal epoxy, since it is a resistor after all.)\n
    \n
    I have seen Bigclive on YouTube encase resistors and a diode rectifier in standard epoxy for use in lighting, so heat probably won’t be an issue now that I think of it.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696392230 {#4298
    date: 2023-10-04 06:03:50.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@cmnybo@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4306 …}
  +nested: Doctrine\ORM\PersistentCollection {#4308 …}
  +votes: Doctrine\ORM\PersistentCollection {#4304 …}
  +reports: Doctrine\ORM\PersistentCollection {#4310 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4312 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4314 …}
  -id: 30812
  -bodyTs: "'ad':1 'bigcliv':38 'bonus':22 'diod':45 'encas':16,41 'epoxi':14,27,49 'heat':55 'issu':61 'joint':21 'light':53 'line':5 'mayb':8 'plastic':11 'point':23 'probabl':56 'rectifi':46 'resistor':32,42 'seen':37 'sinc':28 'solder':20 'standard':48 'thermal':26 'thin':10 'think':7,65 'tube':12 'use':25,51 'won':57 'youtub':40"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.ca/comment/3638132"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392230 {#4295
    date: 2023-10-04 06:03:50.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
28 DENIED moderate 
App\Entity\EntryComment {#4299
  +user: Proxies\__CG__\App\Entity\User {#4302 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: App\Entity\EntryComment {#4219
    +user: App\Entity\User {#4232 …}
    +entry: App\Entity\Entry {#2419}
    +magazine: App\Entity\Magazine {#265}
    +image: null
    +parent: null
    +root: null
    +body: """
      You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
      I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
      """
    +lang: "en"
    +isAdult: false
    +favouriteCount: 1
    +score: 0
    +lastActive: DateTime @1696393522 {#4214
      date: 2023-10-04 06:25:22.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4220 …}
    +nested: Doctrine\ORM\PersistentCollection {#4222 …}
    +votes: Doctrine\ORM\PersistentCollection {#4224 …}
    +reports: Doctrine\ORM\PersistentCollection {#4226 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4228 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4230 …}
    -id: 30804
    -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/comment/3541321"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696390680 {#4215
      date: 2023-10-04 05:38:00.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4219}
  +body: """
    Adding on to this line of thinking, maybe a thin plastic tube and epoxy to encase it with the solder joints. (Bonus points for using thermal epoxy, since it is a resistor after all.)\n
    \n
    I have seen Bigclive on YouTube encase resistors and a diode rectifier in standard epoxy for use in lighting, so heat probably won’t be an issue now that I think of it.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696392230 {#4298
    date: 2023-10-04 06:03:50.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@cmnybo@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4306 …}
  +nested: Doctrine\ORM\PersistentCollection {#4308 …}
  +votes: Doctrine\ORM\PersistentCollection {#4304 …}
  +reports: Doctrine\ORM\PersistentCollection {#4310 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4312 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4314 …}
  -id: 30812
  -bodyTs: "'ad':1 'bigcliv':38 'bonus':22 'diod':45 'encas':16,41 'epoxi':14,27,49 'heat':55 'issu':61 'joint':21 'light':53 'line':5 'mayb':8 'plastic':11 'point':23 'probabl':56 'rectifi':46 'resistor':32,42 'seen':37 'sinc':28 'solder':20 'standard':48 'thermal':26 'thin':10 'think':7,65 'tube':12 'use':25,51 'won':57 'youtub':40"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.ca/comment/3638132"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392230 {#4295
    date: 2023-10-04 06:03:50.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
29 DENIED ROLE_USER 
null
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
30 DENIED moderate 
App\Entity\EntryComment {#4332
  +user: Proxies\__CG__\App\Entity\User {#1970 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: App\Entity\EntryComment {#4299
    +user: Proxies\__CG__\App\Entity\User {#4302 …}
    +entry: App\Entity\Entry {#2419}
    +magazine: App\Entity\Magazine {#265}
    +image: null
    +parent: App\Entity\EntryComment {#4219
      +user: App\Entity\User {#4232 …}
      +entry: App\Entity\Entry {#2419}
      +magazine: App\Entity\Magazine {#265}
      +image: null
      +parent: null
      +root: null
      +body: """
        You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
        I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
        """
      +lang: "en"
      +isAdult: false
      +favouriteCount: 1
      +score: 0
      +lastActive: DateTime @1696393522 {#4214
        date: 2023-10-04 06:25:22.0 +02:00
      }
      +ip: null
      +tags: null
      +mentions: [
        "@thisisawayoflife@lemmy.world"
      ]
      +children: Doctrine\ORM\PersistentCollection {#4220 …}
      +nested: Doctrine\ORM\PersistentCollection {#4222 …}
      +votes: Doctrine\ORM\PersistentCollection {#4224 …}
      +reports: Doctrine\ORM\PersistentCollection {#4226 …}
      +favourites: Doctrine\ORM\PersistentCollection {#4228 …}
      +notifications: Doctrine\ORM\PersistentCollection {#4230 …}
      -id: 30804
      -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
      +ranking: 0
      +commentCount: 0
      +upVotes: 0
      +downVotes: 0
      +visibility: "visible             "
      +apId: "https://discuss.tchncs.de/comment/3541321"
      +editedAt: null
      +createdAt: DateTimeImmutable @1696390680 {#4215
        date: 2023-10-04 05:38:00.0 +02:00
      }
    }
    +root: App\Entity\EntryComment {#4219}
    +body: """
      Adding on to this line of thinking, maybe a thin plastic tube and epoxy to encase it with the solder joints. (Bonus points for using thermal epoxy, since it is a resistor after all.)\n
      \n
      I have seen Bigclive on YouTube encase resistors and a diode rectifier in standard epoxy for use in lighting, so heat probably won’t be an issue now that I think of it.
      """
    +lang: "en"
    +isAdult: false
    +favouriteCount: 1
    +score: 0
    +lastActive: DateTime @1696392230 {#4298
      date: 2023-10-04 06:03:50.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
      "@cmnybo@discuss.tchncs.de"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4306 …}
    +nested: Doctrine\ORM\PersistentCollection {#4308 …}
    +votes: Doctrine\ORM\PersistentCollection {#4304 …}
    +reports: Doctrine\ORM\PersistentCollection {#4310 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4312 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4314 …}
    -id: 30812
    -bodyTs: "'ad':1 'bigcliv':38 'bonus':22 'diod':45 'encas':16,41 'epoxi':14,27,49 'heat':55 'issu':61 'joint':21 'light':53 'line':5 'mayb':8 'plastic':11 'point':23 'probabl':56 'rectifi':46 'resistor':32,42 'seen':37 'sinc':28 'solder':20 'standard':48 'thermal':26 'thin':10 'think':7,65 'tube':12 'use':25,51 'won':57 'youtub':40"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://lemmy.ca/comment/3638132"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696392230 {#4295
      date: 2023-10-04 06:03:50.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4219}
  +body: "This is intriguing and I’m going to think about this."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696392968 {#4337
    date: 2023-10-04 06:16:08.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@cmnybo@discuss.tchncs.de"
    "@remotelove@lemmy.ca"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4340 …}
  +nested: Doctrine\ORM\PersistentCollection {#4344 …}
  +votes: Doctrine\ORM\PersistentCollection {#4346 …}
  +reports: Doctrine\ORM\PersistentCollection {#4347 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4349 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4351 …}
  -id: 30816
  -bodyTs: "'go':7 'intrigu':3 'm':6 'think':9"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4113722"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392968 {#4334
    date: 2023-10-04 06:16:08.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
31 DENIED edit 
App\Entity\EntryComment {#4332
  +user: Proxies\__CG__\App\Entity\User {#1970 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: App\Entity\EntryComment {#4299
    +user: Proxies\__CG__\App\Entity\User {#4302 …}
    +entry: App\Entity\Entry {#2419}
    +magazine: App\Entity\Magazine {#265}
    +image: null
    +parent: App\Entity\EntryComment {#4219
      +user: App\Entity\User {#4232 …}
      +entry: App\Entity\Entry {#2419}
      +magazine: App\Entity\Magazine {#265}
      +image: null
      +parent: null
      +root: null
      +body: """
        You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
        I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
        """
      +lang: "en"
      +isAdult: false
      +favouriteCount: 1
      +score: 0
      +lastActive: DateTime @1696393522 {#4214
        date: 2023-10-04 06:25:22.0 +02:00
      }
      +ip: null
      +tags: null
      +mentions: [
        "@thisisawayoflife@lemmy.world"
      ]
      +children: Doctrine\ORM\PersistentCollection {#4220 …}
      +nested: Doctrine\ORM\PersistentCollection {#4222 …}
      +votes: Doctrine\ORM\PersistentCollection {#4224 …}
      +reports: Doctrine\ORM\PersistentCollection {#4226 …}
      +favourites: Doctrine\ORM\PersistentCollection {#4228 …}
      +notifications: Doctrine\ORM\PersistentCollection {#4230 …}
      -id: 30804
      -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
      +ranking: 0
      +commentCount: 0
      +upVotes: 0
      +downVotes: 0
      +visibility: "visible             "
      +apId: "https://discuss.tchncs.de/comment/3541321"
      +editedAt: null
      +createdAt: DateTimeImmutable @1696390680 {#4215
        date: 2023-10-04 05:38:00.0 +02:00
      }
    }
    +root: App\Entity\EntryComment {#4219}
    +body: """
      Adding on to this line of thinking, maybe a thin plastic tube and epoxy to encase it with the solder joints. (Bonus points for using thermal epoxy, since it is a resistor after all.)\n
      \n
      I have seen Bigclive on YouTube encase resistors and a diode rectifier in standard epoxy for use in lighting, so heat probably won’t be an issue now that I think of it.
      """
    +lang: "en"
    +isAdult: false
    +favouriteCount: 1
    +score: 0
    +lastActive: DateTime @1696392230 {#4298
      date: 2023-10-04 06:03:50.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
      "@cmnybo@discuss.tchncs.de"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4306 …}
    +nested: Doctrine\ORM\PersistentCollection {#4308 …}
    +votes: Doctrine\ORM\PersistentCollection {#4304 …}
    +reports: Doctrine\ORM\PersistentCollection {#4310 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4312 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4314 …}
    -id: 30812
    -bodyTs: "'ad':1 'bigcliv':38 'bonus':22 'diod':45 'encas':16,41 'epoxi':14,27,49 'heat':55 'issu':61 'joint':21 'light':53 'line':5 'mayb':8 'plastic':11 'point':23 'probabl':56 'rectifi':46 'resistor':32,42 'seen':37 'sinc':28 'solder':20 'standard':48 'thermal':26 'thin':10 'think':7,65 'tube':12 'use':25,51 'won':57 'youtub':40"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://lemmy.ca/comment/3638132"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696392230 {#4295
      date: 2023-10-04 06:03:50.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4219}
  +body: "This is intriguing and I’m going to think about this."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696392968 {#4337
    date: 2023-10-04 06:16:08.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@cmnybo@discuss.tchncs.de"
    "@remotelove@lemmy.ca"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4340 …}
  +nested: Doctrine\ORM\PersistentCollection {#4344 …}
  +votes: Doctrine\ORM\PersistentCollection {#4346 …}
  +reports: Doctrine\ORM\PersistentCollection {#4347 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4349 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4351 …}
  -id: 30816
  -bodyTs: "'go':7 'intrigu':3 'm':6 'think':9"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4113722"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392968 {#4334
    date: 2023-10-04 06:16:08.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
32 DENIED moderate 
App\Entity\EntryComment {#4332
  +user: Proxies\__CG__\App\Entity\User {#1970 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: App\Entity\EntryComment {#4299
    +user: Proxies\__CG__\App\Entity\User {#4302 …}
    +entry: App\Entity\Entry {#2419}
    +magazine: App\Entity\Magazine {#265}
    +image: null
    +parent: App\Entity\EntryComment {#4219
      +user: App\Entity\User {#4232 …}
      +entry: App\Entity\Entry {#2419}
      +magazine: App\Entity\Magazine {#265}
      +image: null
      +parent: null
      +root: null
      +body: """
        You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
        I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
        """
      +lang: "en"
      +isAdult: false
      +favouriteCount: 1
      +score: 0
      +lastActive: DateTime @1696393522 {#4214
        date: 2023-10-04 06:25:22.0 +02:00
      }
      +ip: null
      +tags: null
      +mentions: [
        "@thisisawayoflife@lemmy.world"
      ]
      +children: Doctrine\ORM\PersistentCollection {#4220 …}
      +nested: Doctrine\ORM\PersistentCollection {#4222 …}
      +votes: Doctrine\ORM\PersistentCollection {#4224 …}
      +reports: Doctrine\ORM\PersistentCollection {#4226 …}
      +favourites: Doctrine\ORM\PersistentCollection {#4228 …}
      +notifications: Doctrine\ORM\PersistentCollection {#4230 …}
      -id: 30804
      -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
      +ranking: 0
      +commentCount: 0
      +upVotes: 0
      +downVotes: 0
      +visibility: "visible             "
      +apId: "https://discuss.tchncs.de/comment/3541321"
      +editedAt: null
      +createdAt: DateTimeImmutable @1696390680 {#4215
        date: 2023-10-04 05:38:00.0 +02:00
      }
    }
    +root: App\Entity\EntryComment {#4219}
    +body: """
      Adding on to this line of thinking, maybe a thin plastic tube and epoxy to encase it with the solder joints. (Bonus points for using thermal epoxy, since it is a resistor after all.)\n
      \n
      I have seen Bigclive on YouTube encase resistors and a diode rectifier in standard epoxy for use in lighting, so heat probably won’t be an issue now that I think of it.
      """
    +lang: "en"
    +isAdult: false
    +favouriteCount: 1
    +score: 0
    +lastActive: DateTime @1696392230 {#4298
      date: 2023-10-04 06:03:50.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
      "@cmnybo@discuss.tchncs.de"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4306 …}
    +nested: Doctrine\ORM\PersistentCollection {#4308 …}
    +votes: Doctrine\ORM\PersistentCollection {#4304 …}
    +reports: Doctrine\ORM\PersistentCollection {#4310 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4312 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4314 …}
    -id: 30812
    -bodyTs: "'ad':1 'bigcliv':38 'bonus':22 'diod':45 'encas':16,41 'epoxi':14,27,49 'heat':55 'issu':61 'joint':21 'light':53 'line':5 'mayb':8 'plastic':11 'point':23 'probabl':56 'rectifi':46 'resistor':32,42 'seen':37 'sinc':28 'solder':20 'standard':48 'thermal':26 'thin':10 'think':7,65 'tube':12 'use':25,51 'won':57 'youtub':40"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://lemmy.ca/comment/3638132"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696392230 {#4295
      date: 2023-10-04 06:03:50.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4219}
  +body: "This is intriguing and I’m going to think about this."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696392968 {#4337
    date: 2023-10-04 06:16:08.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@cmnybo@discuss.tchncs.de"
    "@remotelove@lemmy.ca"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4340 …}
  +nested: Doctrine\ORM\PersistentCollection {#4344 …}
  +votes: Doctrine\ORM\PersistentCollection {#4346 …}
  +reports: Doctrine\ORM\PersistentCollection {#4347 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4349 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4351 …}
  -id: 30816
  -bodyTs: "'go':7 'intrigu':3 'm':6 'think':9"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4113722"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392968 {#4334
    date: 2023-10-04 06:16:08.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
33 DENIED ROLE_USER 
null
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
34 DENIED moderate 
App\Entity\EntryComment {#4368
  +user: Proxies\__CG__\App\Entity\User {#4302 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: App\Entity\EntryComment {#4332
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +entry: App\Entity\Entry {#2419}
    +magazine: App\Entity\Magazine {#265}
    +image: null
    +parent: App\Entity\EntryComment {#4299
      +user: Proxies\__CG__\App\Entity\User {#4302 …}
      +entry: App\Entity\Entry {#2419}
      +magazine: App\Entity\Magazine {#265}
      +image: null
      +parent: App\Entity\EntryComment {#4219
        +user: App\Entity\User {#4232 …}
        +entry: App\Entity\Entry {#2419}
        +magazine: App\Entity\Magazine {#265}
        +image: null
        +parent: null
        +root: null
        +body: """
          You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
          I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
          """
        +lang: "en"
        +isAdult: false
        +favouriteCount: 1
        +score: 0
        +lastActive: DateTime @1696393522 {#4214
          date: 2023-10-04 06:25:22.0 +02:00
        }
        +ip: null
        +tags: null
        +mentions: [
          "@thisisawayoflife@lemmy.world"
        ]
        +children: Doctrine\ORM\PersistentCollection {#4220 …}
        +nested: Doctrine\ORM\PersistentCollection {#4222 …}
        +votes: Doctrine\ORM\PersistentCollection {#4224 …}
        +reports: Doctrine\ORM\PersistentCollection {#4226 …}
        +favourites: Doctrine\ORM\PersistentCollection {#4228 …}
        +notifications: Doctrine\ORM\PersistentCollection {#4230 …}
        -id: 30804
        -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
        +ranking: 0
        +commentCount: 0
        +upVotes: 0
        +downVotes: 0
        +visibility: "visible             "
        +apId: "https://discuss.tchncs.de/comment/3541321"
        +editedAt: null
        +createdAt: DateTimeImmutable @1696390680 {#4215
          date: 2023-10-04 05:38:00.0 +02:00
        }
      }
      +root: App\Entity\EntryComment {#4219}
      +body: """
        Adding on to this line of thinking, maybe a thin plastic tube and epoxy to encase it with the solder joints. (Bonus points for using thermal epoxy, since it is a resistor after all.)\n
        \n
        I have seen Bigclive on YouTube encase resistors and a diode rectifier in standard epoxy for use in lighting, so heat probably won’t be an issue now that I think of it.
        """
      +lang: "en"
      +isAdult: false
      +favouriteCount: 1
      +score: 0
      +lastActive: DateTime @1696392230 {#4298
        date: 2023-10-04 06:03:50.0 +02:00
      }
      +ip: null
      +tags: null
      +mentions: [
        "@thisisawayoflife@lemmy.world"
        "@cmnybo@discuss.tchncs.de"
      ]
      +children: Doctrine\ORM\PersistentCollection {#4306 …}
      +nested: Doctrine\ORM\PersistentCollection {#4308 …}
      +votes: Doctrine\ORM\PersistentCollection {#4304 …}
      +reports: Doctrine\ORM\PersistentCollection {#4310 …}
      +favourites: Doctrine\ORM\PersistentCollection {#4312 …}
      +notifications: Doctrine\ORM\PersistentCollection {#4314 …}
      -id: 30812
      -bodyTs: "'ad':1 'bigcliv':38 'bonus':22 'diod':45 'encas':16,41 'epoxi':14,27,49 'heat':55 'issu':61 'joint':21 'light':53 'line':5 'mayb':8 'plastic':11 'point':23 'probabl':56 'rectifi':46 'resistor':32,42 'seen':37 'sinc':28 'solder':20 'standard':48 'thermal':26 'thin':10 'think':7,65 'tube':12 'use':25,51 'won':57 'youtub':40"
      +ranking: 0
      +commentCount: 0
      +upVotes: 0
      +downVotes: 0
      +visibility: "visible             "
      +apId: "https://lemmy.ca/comment/3638132"
      +editedAt: null
      +createdAt: DateTimeImmutable @1696392230 {#4295
        date: 2023-10-04 06:03:50.0 +02:00
      }
    }
    +root: App\Entity\EntryComment {#4219}
    +body: "This is intriguing and I’m going to think about this."
    +lang: "en"
    +isAdult: false
    +favouriteCount: 1
    +score: 0
    +lastActive: DateTime @1696392968 {#4337
      date: 2023-10-04 06:16:08.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
      "@cmnybo@discuss.tchncs.de"
      "@remotelove@lemmy.ca"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4340 …}
    +nested: Doctrine\ORM\PersistentCollection {#4344 …}
    +votes: Doctrine\ORM\PersistentCollection {#4346 …}
    +reports: Doctrine\ORM\PersistentCollection {#4347 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4349 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4351 …}
    -id: 30816
    -bodyTs: "'go':7 'intrigu':3 'm':6 'think':9"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://lemmy.world/comment/4113722"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696392968 {#4334
      date: 2023-10-04 06:16:08.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4219}
  +body: """
    I tried finding the video, but I cannot.\n
    \n
    It’s the same concept as potting PCBs with black epoxy. Of course, it helps to be aware of heat sensitive components but China never cares about that.\n
    \n
    Google for Epoxyseal 9000, if you want something proper.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696393521 {#4363
    date: 2023-10-04 06:25:21.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@cmnybo@discuss.tchncs.de"
    "@remotelove@lemmy.ca"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4360 …}
  +nested: Doctrine\ORM\PersistentCollection {#4357 …}
  +votes: Doctrine\ORM\PersistentCollection {#4355 …}
  +reports: Doctrine\ORM\PersistentCollection {#4369 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4371 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4373 …}
  -id: 30819
  -bodyTs: "'9000':40 'awar':26 'black':18 'cannot':8 'care':34 'china':32 'compon':30 'concept':13 'cours':21 'epoxi':19 'epoxys':39 'find':3 'googl':37 'heat':28 'help':23 'never':33 'pcbs':16 'pot':15 'proper':45 'sensit':29 'someth':44 'tri':2 'video':5 'want':43"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.ca/comment/3638360"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696393521 {#4366
    date: 2023-10-04 06:25:21.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
35 DENIED edit 
App\Entity\EntryComment {#4368
  +user: Proxies\__CG__\App\Entity\User {#4302 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: App\Entity\EntryComment {#4332
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +entry: App\Entity\Entry {#2419}
    +magazine: App\Entity\Magazine {#265}
    +image: null
    +parent: App\Entity\EntryComment {#4299
      +user: Proxies\__CG__\App\Entity\User {#4302 …}
      +entry: App\Entity\Entry {#2419}
      +magazine: App\Entity\Magazine {#265}
      +image: null
      +parent: App\Entity\EntryComment {#4219
        +user: App\Entity\User {#4232 …}
        +entry: App\Entity\Entry {#2419}
        +magazine: App\Entity\Magazine {#265}
        +image: null
        +parent: null
        +root: null
        +body: """
          You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
          I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
          """
        +lang: "en"
        +isAdult: false
        +favouriteCount: 1
        +score: 0
        +lastActive: DateTime @1696393522 {#4214
          date: 2023-10-04 06:25:22.0 +02:00
        }
        +ip: null
        +tags: null
        +mentions: [
          "@thisisawayoflife@lemmy.world"
        ]
        +children: Doctrine\ORM\PersistentCollection {#4220 …}
        +nested: Doctrine\ORM\PersistentCollection {#4222 …}
        +votes: Doctrine\ORM\PersistentCollection {#4224 …}
        +reports: Doctrine\ORM\PersistentCollection {#4226 …}
        +favourites: Doctrine\ORM\PersistentCollection {#4228 …}
        +notifications: Doctrine\ORM\PersistentCollection {#4230 …}
        -id: 30804
        -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
        +ranking: 0
        +commentCount: 0
        +upVotes: 0
        +downVotes: 0
        +visibility: "visible             "
        +apId: "https://discuss.tchncs.de/comment/3541321"
        +editedAt: null
        +createdAt: DateTimeImmutable @1696390680 {#4215
          date: 2023-10-04 05:38:00.0 +02:00
        }
      }
      +root: App\Entity\EntryComment {#4219}
      +body: """
        Adding on to this line of thinking, maybe a thin plastic tube and epoxy to encase it with the solder joints. (Bonus points for using thermal epoxy, since it is a resistor after all.)\n
        \n
        I have seen Bigclive on YouTube encase resistors and a diode rectifier in standard epoxy for use in lighting, so heat probably won’t be an issue now that I think of it.
        """
      +lang: "en"
      +isAdult: false
      +favouriteCount: 1
      +score: 0
      +lastActive: DateTime @1696392230 {#4298
        date: 2023-10-04 06:03:50.0 +02:00
      }
      +ip: null
      +tags: null
      +mentions: [
        "@thisisawayoflife@lemmy.world"
        "@cmnybo@discuss.tchncs.de"
      ]
      +children: Doctrine\ORM\PersistentCollection {#4306 …}
      +nested: Doctrine\ORM\PersistentCollection {#4308 …}
      +votes: Doctrine\ORM\PersistentCollection {#4304 …}
      +reports: Doctrine\ORM\PersistentCollection {#4310 …}
      +favourites: Doctrine\ORM\PersistentCollection {#4312 …}
      +notifications: Doctrine\ORM\PersistentCollection {#4314 …}
      -id: 30812
      -bodyTs: "'ad':1 'bigcliv':38 'bonus':22 'diod':45 'encas':16,41 'epoxi':14,27,49 'heat':55 'issu':61 'joint':21 'light':53 'line':5 'mayb':8 'plastic':11 'point':23 'probabl':56 'rectifi':46 'resistor':32,42 'seen':37 'sinc':28 'solder':20 'standard':48 'thermal':26 'thin':10 'think':7,65 'tube':12 'use':25,51 'won':57 'youtub':40"
      +ranking: 0
      +commentCount: 0
      +upVotes: 0
      +downVotes: 0
      +visibility: "visible             "
      +apId: "https://lemmy.ca/comment/3638132"
      +editedAt: null
      +createdAt: DateTimeImmutable @1696392230 {#4295
        date: 2023-10-04 06:03:50.0 +02:00
      }
    }
    +root: App\Entity\EntryComment {#4219}
    +body: "This is intriguing and I’m going to think about this."
    +lang: "en"
    +isAdult: false
    +favouriteCount: 1
    +score: 0
    +lastActive: DateTime @1696392968 {#4337
      date: 2023-10-04 06:16:08.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
      "@cmnybo@discuss.tchncs.de"
      "@remotelove@lemmy.ca"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4340 …}
    +nested: Doctrine\ORM\PersistentCollection {#4344 …}
    +votes: Doctrine\ORM\PersistentCollection {#4346 …}
    +reports: Doctrine\ORM\PersistentCollection {#4347 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4349 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4351 …}
    -id: 30816
    -bodyTs: "'go':7 'intrigu':3 'm':6 'think':9"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://lemmy.world/comment/4113722"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696392968 {#4334
      date: 2023-10-04 06:16:08.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4219}
  +body: """
    I tried finding the video, but I cannot.\n
    \n
    It’s the same concept as potting PCBs with black epoxy. Of course, it helps to be aware of heat sensitive components but China never cares about that.\n
    \n
    Google for Epoxyseal 9000, if you want something proper.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696393521 {#4363
    date: 2023-10-04 06:25:21.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@cmnybo@discuss.tchncs.de"
    "@remotelove@lemmy.ca"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4360 …}
  +nested: Doctrine\ORM\PersistentCollection {#4357 …}
  +votes: Doctrine\ORM\PersistentCollection {#4355 …}
  +reports: Doctrine\ORM\PersistentCollection {#4369 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4371 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4373 …}
  -id: 30819
  -bodyTs: "'9000':40 'awar':26 'black':18 'cannot':8 'care':34 'china':32 'compon':30 'concept':13 'cours':21 'epoxi':19 'epoxys':39 'find':3 'googl':37 'heat':28 'help':23 'never':33 'pcbs':16 'pot':15 'proper':45 'sensit':29 'someth':44 'tri':2 'video':5 'want':43"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.ca/comment/3638360"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696393521 {#4366
    date: 2023-10-04 06:25:21.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
36 DENIED moderate 
App\Entity\EntryComment {#4368
  +user: Proxies\__CG__\App\Entity\User {#4302 …}
  +entry: App\Entity\Entry {#2419
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +magazine: App\Entity\Magazine {#265
      +icon: Proxies\__CG__\App\Entity\Image {#246 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#275
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#237 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
      +entries: Doctrine\ORM\PersistentCollection {#180 …}
      +posts: Doctrine\ORM\PersistentCollection {#138 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
      +bans: Doctrine\ORM\PersistentCollection {#117 …}
      +reports: Doctrine\ORM\PersistentCollection {#103 …}
      +badges: Doctrine\ORM\PersistentCollection {#81 …}
      +logs: Doctrine\ORM\PersistentCollection {#71 …}
      +awards: Doctrine\ORM\PersistentCollection {#1346 …}
      +categories: Doctrine\ORM\PersistentCollection {#1823 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#269
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#271
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1915 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2414
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1884 …}
    +votes: Doctrine\ORM\PersistentCollection {#1973 …}
    +reports: Doctrine\ORM\PersistentCollection {#1959 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1927 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2442 …}
    +badges: Doctrine\ORM\PersistentCollection {#2440 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1793
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#265}
  +image: null
  +parent: App\Entity\EntryComment {#4332
    +user: Proxies\__CG__\App\Entity\User {#1970 …}
    +entry: App\Entity\Entry {#2419}
    +magazine: App\Entity\Magazine {#265}
    +image: null
    +parent: App\Entity\EntryComment {#4299
      +user: Proxies\__CG__\App\Entity\User {#4302 …}
      +entry: App\Entity\Entry {#2419}
      +magazine: App\Entity\Magazine {#265}
      +image: null
      +parent: App\Entity\EntryComment {#4219
        +user: App\Entity\User {#4232 …}
        +entry: App\Entity\Entry {#2419}
        +magazine: App\Entity\Magazine {#265}
        +image: null
        +parent: null
        +root: null
        +body: """
          You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
          I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
          """
        +lang: "en"
        +isAdult: false
        +favouriteCount: 1
        +score: 0
        +lastActive: DateTime @1696393522 {#4214
          date: 2023-10-04 06:25:22.0 +02:00
        }
        +ip: null
        +tags: null
        +mentions: [
          "@thisisawayoflife@lemmy.world"
        ]
        +children: Doctrine\ORM\PersistentCollection {#4220 …}
        +nested: Doctrine\ORM\PersistentCollection {#4222 …}
        +votes: Doctrine\ORM\PersistentCollection {#4224 …}
        +reports: Doctrine\ORM\PersistentCollection {#4226 …}
        +favourites: Doctrine\ORM\PersistentCollection {#4228 …}
        +notifications: Doctrine\ORM\PersistentCollection {#4230 …}
        -id: 30804
        -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
        +ranking: 0
        +commentCount: 0
        +upVotes: 0
        +downVotes: 0
        +visibility: "visible             "
        +apId: "https://discuss.tchncs.de/comment/3541321"
        +editedAt: null
        +createdAt: DateTimeImmutable @1696390680 {#4215
          date: 2023-10-04 05:38:00.0 +02:00
        }
      }
      +root: App\Entity\EntryComment {#4219}
      +body: """
        Adding on to this line of thinking, maybe a thin plastic tube and epoxy to encase it with the solder joints. (Bonus points for using thermal epoxy, since it is a resistor after all.)\n
        \n
        I have seen Bigclive on YouTube encase resistors and a diode rectifier in standard epoxy for use in lighting, so heat probably won’t be an issue now that I think of it.
        """
      +lang: "en"
      +isAdult: false
      +favouriteCount: 1
      +score: 0
      +lastActive: DateTime @1696392230 {#4298
        date: 2023-10-04 06:03:50.0 +02:00
      }
      +ip: null
      +tags: null
      +mentions: [
        "@thisisawayoflife@lemmy.world"
        "@cmnybo@discuss.tchncs.de"
      ]
      +children: Doctrine\ORM\PersistentCollection {#4306 …}
      +nested: Doctrine\ORM\PersistentCollection {#4308 …}
      +votes: Doctrine\ORM\PersistentCollection {#4304 …}
      +reports: Doctrine\ORM\PersistentCollection {#4310 …}
      +favourites: Doctrine\ORM\PersistentCollection {#4312 …}
      +notifications: Doctrine\ORM\PersistentCollection {#4314 …}
      -id: 30812
      -bodyTs: "'ad':1 'bigcliv':38 'bonus':22 'diod':45 'encas':16,41 'epoxi':14,27,49 'heat':55 'issu':61 'joint':21 'light':53 'line':5 'mayb':8 'plastic':11 'point':23 'probabl':56 'rectifi':46 'resistor':32,42 'seen':37 'sinc':28 'solder':20 'standard':48 'thermal':26 'thin':10 'think':7,65 'tube':12 'use':25,51 'won':57 'youtub':40"
      +ranking: 0
      +commentCount: 0
      +upVotes: 0
      +downVotes: 0
      +visibility: "visible             "
      +apId: "https://lemmy.ca/comment/3638132"
      +editedAt: null
      +createdAt: DateTimeImmutable @1696392230 {#4295
        date: 2023-10-04 06:03:50.0 +02:00
      }
    }
    +root: App\Entity\EntryComment {#4219}
    +body: "This is intriguing and I’m going to think about this."
    +lang: "en"
    +isAdult: false
    +favouriteCount: 1
    +score: 0
    +lastActive: DateTime @1696392968 {#4337
      date: 2023-10-04 06:16:08.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
      "@cmnybo@discuss.tchncs.de"
      "@remotelove@lemmy.ca"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4340 …}
    +nested: Doctrine\ORM\PersistentCollection {#4344 …}
    +votes: Doctrine\ORM\PersistentCollection {#4346 …}
    +reports: Doctrine\ORM\PersistentCollection {#4347 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4349 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4351 …}
    -id: 30816
    -bodyTs: "'go':7 'intrigu':3 'm':6 'think':9"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://lemmy.world/comment/4113722"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696392968 {#4334
      date: 2023-10-04 06:16:08.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4219}
  +body: """
    I tried finding the video, but I cannot.\n
    \n
    It’s the same concept as potting PCBs with black epoxy. Of course, it helps to be aware of heat sensitive components but China never cares about that.\n
    \n
    Google for Epoxyseal 9000, if you want something proper.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696393521 {#4363
    date: 2023-10-04 06:25:21.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@cmnybo@discuss.tchncs.de"
    "@remotelove@lemmy.ca"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4360 …}
  +nested: Doctrine\ORM\PersistentCollection {#4357 …}
  +votes: Doctrine\ORM\PersistentCollection {#4355 …}
  +reports: Doctrine\ORM\PersistentCollection {#4369 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4371 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4373 …}
  -id: 30819
  -bodyTs: "'9000':40 'awar':26 'black':18 'cannot':8 'care':34 'china':32 'compon':30 'concept':13 'cours':21 'epoxi':19 'epoxys':39 'find':3 'googl':37 'heat':28 'help':23 'never':33 'pcbs':16 'pot':15 'proper':45 'sensit':29 'someth':44 'tri':2 'video':5 'want':43"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.ca/comment/3638360"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696393521 {#4366
    date: 2023-10-04 06:25:21.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
37 DENIED edit 
App\Entity\Magazine {#265
  +icon: Proxies\__CG__\App\Entity\Image {#246 …}
  +name: "askelectronics@discuss.tchncs.de"
  +title: "askelectronics"
  +description: """
    **For questions about component-level electronic circuits, tools and equipment.**\n
    \n
    Rules\n
    -----\n
    \n
    1: Be nice.\n
    \n
    2: Be on-topic (eg: *Electronic*, not *electrical*).\n
    \n
    3: No commercial stuff, buying, selling or valuations.\n
    \n
    4: Be safe.\n
    \n
    ---
    """
  +rules: null
  +subscriptionsCount: 1
  +entryCount: 154
  +entryCommentCount: 1230
  +postCount: 1
  +postCommentCount: 4
  +isAdult: false
  +customCss: null
  +lastActive: DateTime @1729413608 {#275
    date: 2024-10-20 10:40:08.0 +02:00
  }
  +markedForDeletionAt: null
  +tags: null
  +moderators: Doctrine\ORM\PersistentCollection {#237 …}
  +ownershipRequests: Doctrine\ORM\PersistentCollection {#233 …}
  +moderatorRequests: Doctrine\ORM\PersistentCollection {#222 …}
  +entries: Doctrine\ORM\PersistentCollection {#180 …}
  +posts: Doctrine\ORM\PersistentCollection {#138 …}
  +subscriptions: Doctrine\ORM\PersistentCollection {#200 …}
  +bans: Doctrine\ORM\PersistentCollection {#117 …}
  +reports: Doctrine\ORM\PersistentCollection {#103 …}
  +badges: Doctrine\ORM\PersistentCollection {#81 …}
  +logs: Doctrine\ORM\PersistentCollection {#71 …}
  +awards: Doctrine\ORM\PersistentCollection {#1346 …}
  +categories: Doctrine\ORM\PersistentCollection {#1823 …}
  -id: 11
  +apId: "askelectronics@discuss.tchncs.de"
  +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
  +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
  +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
  +apInboxUrl: "https://discuss.tchncs.de/inbox"
  +apDomain: "discuss.tchncs.de"
  +apPreferredUsername: "askelectronics"
  +apDiscoverable: true
  +apManuallyApprovesFollowers: null
  +privateKey: null
  +publicKey: null
  +apFetchedAt: DateTime @1727247714 {#269
    date: 2024-09-25 09:01:54.0 +02:00
  }
  +apDeletedAt: null
  +apTimeoutAt: null
  +visibility: "visible             "
  +createdAt: DateTimeImmutable @1687144409 {#271
    date: 2023-06-19 05:13:29.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS DENIED 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details