GET https://kbin.spritesserver.nl/m/electronics@discuss.tchncs.de/t/8890/My-customisable-solar-hot-water-system-controller-project-in-progress/comment/83220/votes/u…

Response
200 OK
IP
216.73.216.136
Profiled on
Token
ac124d

Security

Token

There is no security token.

Firewall

main Name
Security enabled
Stateless

Configuration

Key Value
provider security.user.provider.concrete.app_user_provider
context main
entry_point App\Security\KbinAuthenticator
user_checker App\Security\UserChecker
access_denied_handler (none)
access_denied_url (none)
authenticators 
[
  "two_factor"
  "remember_me"
  "App\Security\KbinAuthenticator"
  "App\Security\FacebookAuthenticator"
  "App\Security\GoogleAuthenticator"
  "App\Security\GithubAuthenticator"
  "App\Security\KeycloakAuthenticator"
]

Listeners

Listener Duration Response 
Symfony\Component\Security\Http\Firewall\ChannelListener {#723
  -map: Symfony\Component\Security\Http\AccessMap {#722 …}
  -logger: Monolog\Logger {#783 …}
  -httpPort: 80
  -httpsPort: 443
}
 0.00 ms (none) 
Symfony\Component\Security\Http\Firewall\ContextListener {#706
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\TokenStorage {#1017 …}
  -sessionKey: "_security_main"
  -logger: Monolog\Logger {#783 …}
  -userProviders: Symfony\Component\DependencyInjection\Argument\RewindableGenerator {#705 …}
  -dispatcher: Symfony\Component\EventDispatcher\Debug\TraceableEventDispatcher {#747 …}
  -registered: false
  -trustResolver: Scheb\TwoFactorBundle\Security\Authentication\AuthenticationTrustResolver {#780 …}
  -sessionTrackerEnabler: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage::enableUsageTracking(): void {#703 …}
}
 11.40 ms (none) 
Symfony\Component\Security\Http\Firewall\AuthenticatorManagerListener {#584
  -authenticatorManager: Symfony\Component\Security\Http\Authentication\AuthenticatorManager {#595 …}
}
 0.00 ms (none) 
Scheb\TwoFactorBundle\Security\Http\Firewall\TwoFactorAccessListener {#582
  -twoFactorFirewallConfig: Scheb\TwoFactorBundle\Security\TwoFactor\TwoFactorFirewallConfig {#842 …}
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …}
  -twoFactorAccessDecider: Scheb\TwoFactorBundle\Security\Authorization\TwoFactorAccessDecider {#581 …}
}
 0.07 ms (none) 
Symfony\Component\Security\Http\Firewall\AccessListener {#579
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …}
  -accessDecisionManager: Symfony\Component\Security\Core\Authorization\TraceableAccessDecisionManager {#937 …}
  -map: Symfony\Component\Security\Http\AccessMap {#722 …}
}
 0.00 ms (none) 
Symfony\Component\Security\Http\Firewall\LogoutListener {#786
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …}
  -options: [
    "csrf_parameter" => "_csrf_token"
    "csrf_token_id" => "logout"
    "logout_path" => "app_logout"
  ]
  -httpUtils: Symfony\Component\Security\Http\HttpUtils {#841 …}
  -csrfTokenManager: Symfony\Component\Security\Csrf\CsrfTokenManager {#1015 …}
  -eventDispatcher: Symfony\Component\EventDispatcher\Debug\TraceableEventDispatcher {#747 …}
}
 0.00 ms (none)

Authenticators

No authenticators have been recorded. Check previous profiles on your authentication endpoint.

Access Decision

affirmative Strategy
# Voter class
1 
"Symfony\Component\Security\Core\Authorization\Voter\AuthenticatedVoter"
2 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
3 
"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
4 
"Symfony\Component\Security\Core\Authorization\Voter\ExpressionVoter"
5 
"App\Security\Voter\EntryCommentVoter"
6 
"App\Security\Voter\EntryVoter"
7 
"App\Security\Voter\MagazineVoter"
8 
"App\Security\Voter\MessageThreadVoter"
9 
"App\Security\Voter\MessageVoter"
10 
"App\Security\Voter\NotificationVoter"
11 
"App\Security\Voter\OAuth2UserConsentVoter"
12 
"App\Security\Voter\PostCommentVoter"
13 
"App\Security\Voter\PostVoter"
14 
"App\Security\Voter\UserVoter"

Access decision log

# Result Attributes Object
1 DENIED ROLE_USER 
null
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
2 DENIED moderate 
App\Entity\EntryComment {#1366
  +user: Proxies\__CG__\App\Entity\User {#1882 …}
  +entry: App\Entity\Entry {#1856 …}
  +magazine: App\Entity\Magazine {#312
    +icon: Proxies\__CG__\App\Entity\Image {#293 …}
    +name: "electronics@discuss.tchncs.de"
    +title: "electronics"
    +description: """
      **Projects, pictures, industry discussions and news about electronic engineering & component-level electronic circuits.**\n
      \n
      Rules\n
      -----\n
      \n
      1: Be nice.\n
      \n
      2: Be on-topic (eg: *Electronic*, not *electrical*).\n
      \n
      3: No commercial stuff, buying, selling or valuations.\n
      \n
      4: No circuit design or repair, tools or component questions.\n
      \n
      5: No excessively promoting your own sites, social media, videos etc.\n
      \n
      ---\n
      \n
      *Ask questions in [discuss.tchncs.de/c/askelectronics](https://discuss.tchncs.de/c/askelectronics)*\n
      \n
      ---
      """
    +rules: null
    +subscriptionsCount: 1
    +entryCount: 43
    +entryCommentCount: 201
    +postCount: 1
    +postCommentCount: 3
    +isAdult: false
    +customCss: null
    +lastActive: DateTime @1723220252 {#320
      date: 2024-08-09 18:17:32.0 +02:00
    }
    +markedForDeletionAt: null
    +tags: null
    +moderators: Doctrine\ORM\PersistentCollection {#284 …}
    +ownershipRequests: Doctrine\ORM\PersistentCollection {#280 …}
    +moderatorRequests: Doctrine\ORM\PersistentCollection {#269 …}
    +entries: Doctrine\ORM\PersistentCollection {#227 …}
    +posts: Doctrine\ORM\PersistentCollection {#185 …}
    +subscriptions: Doctrine\ORM\PersistentCollection {#247 …}
    +bans: Doctrine\ORM\PersistentCollection {#164 …}
    +reports: Doctrine\ORM\PersistentCollection {#150 …}
    +badges: Doctrine\ORM\PersistentCollection {#128 …}
    +logs: Doctrine\ORM\PersistentCollection {#118 …}
    +awards: Doctrine\ORM\PersistentCollection {#107 …}
    +categories: Doctrine\ORM\PersistentCollection {#94 …}
    -id: 5
    +apId: "electronics@discuss.tchncs.de"
    +apProfileId: "https://discuss.tchncs.de/c/electronics"
    +apPublicUrl: "https://discuss.tchncs.de/c/electronics"
    +apFollowersUrl: "https://discuss.tchncs.de/c/electronics/followers"
    +apInboxUrl: "https://discuss.tchncs.de/inbox"
    +apDomain: "discuss.tchncs.de"
    +apPreferredUsername: "electronics"
    +apDiscoverable: true
    +apManuallyApprovesFollowers: null
    +privateKey: null
    +publicKey: null
    +apFetchedAt: DateTime @1719675646 {#321
      date: 2024-06-29 17:40:46.0 +02:00
    }
    +apDeletedAt: null
    +apTimeoutAt: null
    +visibility: "visible             "
    +createdAt: DateTimeImmutable @1686642591 {#315
      date: 2023-06-13 09:49:51.0 +02:00
    }
  }
  +image: null
  +parent: Proxies\__CG__\App\Entity\EntryComment {#2476 …}
  +root: Proxies\__CG__\App\Entity\EntryComment {#2476 …}
  +body: """
    Yes the traces are pretty light for those kinds of currents, and I did have some concerns on the track spacing around the SCR and the screw terminals. The fatter tracks use a spacing for 240v that I looked up online.\n
    \n
    Humidity here isn’t “tropical” as such, the board will probably get a coat of lacquer anyway.\n
    \n
    The circulating pump is rated at 240v/20 watts (so not much current when it’s running steady state), and the SCR I’m using is good for a few amps of continuous current draw with a fairly high surge current. The SCR has minimal heatsinking so it will go first in extended high current situations, there’s going to be a panel mount fuse before all of this that I’ll probably set to 2 amps or so.\n
    \n
    The zero-crossing SCR controller I’m using “should” prevent switching on the pump at the peaks of the mains cycle so max current should just be the initial stall current from the motor before it gets up to speed.\n
    \n
    The pump is an induction motor so the only concern I’ve got is false triggering of the SCR and being unable to turn the pump off once triggered. I used an example snubber circuit from the data sheet of the zero crossing controller and of course they said “your milage may vary”.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 0
  +score: 0
  +lastActive: DateTime @1698867444 {#1769
    date: 2023-11-01 20:37:24.0 +01:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@dgriffith@aussie.zone"
    "@JustEnoughDucks@feddit.nl"
  ]
  +children: Doctrine\ORM\PersistentCollection {#2466 …}
  +nested: Doctrine\ORM\PersistentCollection {#2167 …}
  +votes: Doctrine\ORM\PersistentCollection {#2424 …}
  +reports: Doctrine\ORM\PersistentCollection {#2440 …}
  +favourites: Doctrine\ORM\PersistentCollection {#1359 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2485 …}
  -id: 83220
  -bodyTs: "'2':133 '240v':36 '240v/20':65 'amp':88,134 'anyway':58 'around':22 'board':50 'circuit':212 'circul':60 'coat':55 'concern':17,187 'continu':90 'control':142,221 'cours':224 'cross':140,220 'current':11,70,91,98,112,161,168 'cycl':158 'data':215 'draw':92 'exampl':210 'extend':110 'fair':95 'fals':192 'fatter':30 'first':108 'fuse':122 'get':53,174 'go':107,116 'good':84 'got':190 'heatsink':103 'high':96,111 'humid':42 'induct':182 'initi':166 'isn':44 'kind':9 'lacquer':57 'light':6 'll':129 'look':39 'm':81,144 'main':157 'max':160 'may':229 'milag':228 'minim':102 'motor':171,183 'mount':121 'much':69 'onlin':41 'panel':120 'peak':154 'pretti':5 'prevent':147 'probabl':52,130 'pump':61,151,179,203 'rate':63 'run':74 'said':226 'scr':24,79,100,141,196 'screw':27 'set':131 'sheet':216 'situat':113 'snubber':211 'space':21,34 'speed':177 'stall':167 'state':76 'steadi':75 'surg':97 'switch':148 'termin':28 'trace':3 'track':20,31 'trigger':193,206 'tropic':46 'turn':201 'unabl':199 'use':32,82,145,208 'vari':230 've':189 'watt':66 'yes':1 'zero':139,219 'zero-cross':138"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://aussie.zone/comment/4007716"
  +editedAt: null
  +createdAt: DateTimeImmutable @1698867444 {#1945
    date: 2023-11-01 20:37:24.0 +01:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
3 DENIED edit 
App\Entity\EntryComment {#1366
  +user: Proxies\__CG__\App\Entity\User {#1882 …}
  +entry: App\Entity\Entry {#1856 …}
  +magazine: App\Entity\Magazine {#312
    +icon: Proxies\__CG__\App\Entity\Image {#293 …}
    +name: "electronics@discuss.tchncs.de"
    +title: "electronics"
    +description: """
      **Projects, pictures, industry discussions and news about electronic engineering & component-level electronic circuits.**\n
      \n
      Rules\n
      -----\n
      \n
      1: Be nice.\n
      \n
      2: Be on-topic (eg: *Electronic*, not *electrical*).\n
      \n
      3: No commercial stuff, buying, selling or valuations.\n
      \n
      4: No circuit design or repair, tools or component questions.\n
      \n
      5: No excessively promoting your own sites, social media, videos etc.\n
      \n
      ---\n
      \n
      *Ask questions in [discuss.tchncs.de/c/askelectronics](https://discuss.tchncs.de/c/askelectronics)*\n
      \n
      ---
      """
    +rules: null
    +subscriptionsCount: 1
    +entryCount: 43
    +entryCommentCount: 201
    +postCount: 1
    +postCommentCount: 3
    +isAdult: false
    +customCss: null
    +lastActive: DateTime @1723220252 {#320
      date: 2024-08-09 18:17:32.0 +02:00
    }
    +markedForDeletionAt: null
    +tags: null
    +moderators: Doctrine\ORM\PersistentCollection {#284 …}
    +ownershipRequests: Doctrine\ORM\PersistentCollection {#280 …}
    +moderatorRequests: Doctrine\ORM\PersistentCollection {#269 …}
    +entries: Doctrine\ORM\PersistentCollection {#227 …}
    +posts: Doctrine\ORM\PersistentCollection {#185 …}
    +subscriptions: Doctrine\ORM\PersistentCollection {#247 …}
    +bans: Doctrine\ORM\PersistentCollection {#164 …}
    +reports: Doctrine\ORM\PersistentCollection {#150 …}
    +badges: Doctrine\ORM\PersistentCollection {#128 …}
    +logs: Doctrine\ORM\PersistentCollection {#118 …}
    +awards: Doctrine\ORM\PersistentCollection {#107 …}
    +categories: Doctrine\ORM\PersistentCollection {#94 …}
    -id: 5
    +apId: "electronics@discuss.tchncs.de"
    +apProfileId: "https://discuss.tchncs.de/c/electronics"
    +apPublicUrl: "https://discuss.tchncs.de/c/electronics"
    +apFollowersUrl: "https://discuss.tchncs.de/c/electronics/followers"
    +apInboxUrl: "https://discuss.tchncs.de/inbox"
    +apDomain: "discuss.tchncs.de"
    +apPreferredUsername: "electronics"
    +apDiscoverable: true
    +apManuallyApprovesFollowers: null
    +privateKey: null
    +publicKey: null
    +apFetchedAt: DateTime @1719675646 {#321
      date: 2024-06-29 17:40:46.0 +02:00
    }
    +apDeletedAt: null
    +apTimeoutAt: null
    +visibility: "visible             "
    +createdAt: DateTimeImmutable @1686642591 {#315
      date: 2023-06-13 09:49:51.0 +02:00
    }
  }
  +image: null
  +parent: Proxies\__CG__\App\Entity\EntryComment {#2476 …}
  +root: Proxies\__CG__\App\Entity\EntryComment {#2476 …}
  +body: """
    Yes the traces are pretty light for those kinds of currents, and I did have some concerns on the track spacing around the SCR and the screw terminals. The fatter tracks use a spacing for 240v that I looked up online.\n
    \n
    Humidity here isn’t “tropical” as such, the board will probably get a coat of lacquer anyway.\n
    \n
    The circulating pump is rated at 240v/20 watts (so not much current when it’s running steady state), and the SCR I’m using is good for a few amps of continuous current draw with a fairly high surge current. The SCR has minimal heatsinking so it will go first in extended high current situations, there’s going to be a panel mount fuse before all of this that I’ll probably set to 2 amps or so.\n
    \n
    The zero-crossing SCR controller I’m using “should” prevent switching on the pump at the peaks of the mains cycle so max current should just be the initial stall current from the motor before it gets up to speed.\n
    \n
    The pump is an induction motor so the only concern I’ve got is false triggering of the SCR and being unable to turn the pump off once triggered. I used an example snubber circuit from the data sheet of the zero crossing controller and of course they said “your milage may vary”.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 0
  +score: 0
  +lastActive: DateTime @1698867444 {#1769
    date: 2023-11-01 20:37:24.0 +01:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@dgriffith@aussie.zone"
    "@JustEnoughDucks@feddit.nl"
  ]
  +children: Doctrine\ORM\PersistentCollection {#2466 …}
  +nested: Doctrine\ORM\PersistentCollection {#2167 …}
  +votes: Doctrine\ORM\PersistentCollection {#2424 …}
  +reports: Doctrine\ORM\PersistentCollection {#2440 …}
  +favourites: Doctrine\ORM\PersistentCollection {#1359 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2485 …}
  -id: 83220
  -bodyTs: "'2':133 '240v':36 '240v/20':65 'amp':88,134 'anyway':58 'around':22 'board':50 'circuit':212 'circul':60 'coat':55 'concern':17,187 'continu':90 'control':142,221 'cours':224 'cross':140,220 'current':11,70,91,98,112,161,168 'cycl':158 'data':215 'draw':92 'exampl':210 'extend':110 'fair':95 'fals':192 'fatter':30 'first':108 'fuse':122 'get':53,174 'go':107,116 'good':84 'got':190 'heatsink':103 'high':96,111 'humid':42 'induct':182 'initi':166 'isn':44 'kind':9 'lacquer':57 'light':6 'll':129 'look':39 'm':81,144 'main':157 'max':160 'may':229 'milag':228 'minim':102 'motor':171,183 'mount':121 'much':69 'onlin':41 'panel':120 'peak':154 'pretti':5 'prevent':147 'probabl':52,130 'pump':61,151,179,203 'rate':63 'run':74 'said':226 'scr':24,79,100,141,196 'screw':27 'set':131 'sheet':216 'situat':113 'snubber':211 'space':21,34 'speed':177 'stall':167 'state':76 'steadi':75 'surg':97 'switch':148 'termin':28 'trace':3 'track':20,31 'trigger':193,206 'tropic':46 'turn':201 'unabl':199 'use':32,82,145,208 'vari':230 've':189 'watt':66 'yes':1 'zero':139,219 'zero-cross':138"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://aussie.zone/comment/4007716"
  +editedAt: null
  +createdAt: DateTimeImmutable @1698867444 {#1945
    date: 2023-11-01 20:37:24.0 +01:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
4 DENIED moderate 
App\Entity\EntryComment {#1366
  +user: Proxies\__CG__\App\Entity\User {#1882 …}
  +entry: App\Entity\Entry {#1856 …}
  +magazine: App\Entity\Magazine {#312
    +icon: Proxies\__CG__\App\Entity\Image {#293 …}
    +name: "electronics@discuss.tchncs.de"
    +title: "electronics"
    +description: """
      **Projects, pictures, industry discussions and news about electronic engineering & component-level electronic circuits.**\n
      \n
      Rules\n
      -----\n
      \n
      1: Be nice.\n
      \n
      2: Be on-topic (eg: *Electronic*, not *electrical*).\n
      \n
      3: No commercial stuff, buying, selling or valuations.\n
      \n
      4: No circuit design or repair, tools or component questions.\n
      \n
      5: No excessively promoting your own sites, social media, videos etc.\n
      \n
      ---\n
      \n
      *Ask questions in [discuss.tchncs.de/c/askelectronics](https://discuss.tchncs.de/c/askelectronics)*\n
      \n
      ---
      """
    +rules: null
    +subscriptionsCount: 1
    +entryCount: 43
    +entryCommentCount: 201
    +postCount: 1
    +postCommentCount: 3
    +isAdult: false
    +customCss: null
    +lastActive: DateTime @1723220252 {#320
      date: 2024-08-09 18:17:32.0 +02:00
    }
    +markedForDeletionAt: null
    +tags: null
    +moderators: Doctrine\ORM\PersistentCollection {#284 …}
    +ownershipRequests: Doctrine\ORM\PersistentCollection {#280 …}
    +moderatorRequests: Doctrine\ORM\PersistentCollection {#269 …}
    +entries: Doctrine\ORM\PersistentCollection {#227 …}
    +posts: Doctrine\ORM\PersistentCollection {#185 …}
    +subscriptions: Doctrine\ORM\PersistentCollection {#247 …}
    +bans: Doctrine\ORM\PersistentCollection {#164 …}
    +reports: Doctrine\ORM\PersistentCollection {#150 …}
    +badges: Doctrine\ORM\PersistentCollection {#128 …}
    +logs: Doctrine\ORM\PersistentCollection {#118 …}
    +awards: Doctrine\ORM\PersistentCollection {#107 …}
    +categories: Doctrine\ORM\PersistentCollection {#94 …}
    -id: 5
    +apId: "electronics@discuss.tchncs.de"
    +apProfileId: "https://discuss.tchncs.de/c/electronics"
    +apPublicUrl: "https://discuss.tchncs.de/c/electronics"
    +apFollowersUrl: "https://discuss.tchncs.de/c/electronics/followers"
    +apInboxUrl: "https://discuss.tchncs.de/inbox"
    +apDomain: "discuss.tchncs.de"
    +apPreferredUsername: "electronics"
    +apDiscoverable: true
    +apManuallyApprovesFollowers: null
    +privateKey: null
    +publicKey: null
    +apFetchedAt: DateTime @1719675646 {#321
      date: 2024-06-29 17:40:46.0 +02:00
    }
    +apDeletedAt: null
    +apTimeoutAt: null
    +visibility: "visible             "
    +createdAt: DateTimeImmutable @1686642591 {#315
      date: 2023-06-13 09:49:51.0 +02:00
    }
  }
  +image: null
  +parent: Proxies\__CG__\App\Entity\EntryComment {#2476 …}
  +root: Proxies\__CG__\App\Entity\EntryComment {#2476 …}
  +body: """
    Yes the traces are pretty light for those kinds of currents, and I did have some concerns on the track spacing around the SCR and the screw terminals. The fatter tracks use a spacing for 240v that I looked up online.\n
    \n
    Humidity here isn’t “tropical” as such, the board will probably get a coat of lacquer anyway.\n
    \n
    The circulating pump is rated at 240v/20 watts (so not much current when it’s running steady state), and the SCR I’m using is good for a few amps of continuous current draw with a fairly high surge current. The SCR has minimal heatsinking so it will go first in extended high current situations, there’s going to be a panel mount fuse before all of this that I’ll probably set to 2 amps or so.\n
    \n
    The zero-crossing SCR controller I’m using “should” prevent switching on the pump at the peaks of the mains cycle so max current should just be the initial stall current from the motor before it gets up to speed.\n
    \n
    The pump is an induction motor so the only concern I’ve got is false triggering of the SCR and being unable to turn the pump off once triggered. I used an example snubber circuit from the data sheet of the zero crossing controller and of course they said “your milage may vary”.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 0
  +score: 0
  +lastActive: DateTime @1698867444 {#1769
    date: 2023-11-01 20:37:24.0 +01:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@dgriffith@aussie.zone"
    "@JustEnoughDucks@feddit.nl"
  ]
  +children: Doctrine\ORM\PersistentCollection {#2466 …}
  +nested: Doctrine\ORM\PersistentCollection {#2167 …}
  +votes: Doctrine\ORM\PersistentCollection {#2424 …}
  +reports: Doctrine\ORM\PersistentCollection {#2440 …}
  +favourites: Doctrine\ORM\PersistentCollection {#1359 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2485 …}
  -id: 83220
  -bodyTs: "'2':133 '240v':36 '240v/20':65 'amp':88,134 'anyway':58 'around':22 'board':50 'circuit':212 'circul':60 'coat':55 'concern':17,187 'continu':90 'control':142,221 'cours':224 'cross':140,220 'current':11,70,91,98,112,161,168 'cycl':158 'data':215 'draw':92 'exampl':210 'extend':110 'fair':95 'fals':192 'fatter':30 'first':108 'fuse':122 'get':53,174 'go':107,116 'good':84 'got':190 'heatsink':103 'high':96,111 'humid':42 'induct':182 'initi':166 'isn':44 'kind':9 'lacquer':57 'light':6 'll':129 'look':39 'm':81,144 'main':157 'max':160 'may':229 'milag':228 'minim':102 'motor':171,183 'mount':121 'much':69 'onlin':41 'panel':120 'peak':154 'pretti':5 'prevent':147 'probabl':52,130 'pump':61,151,179,203 'rate':63 'run':74 'said':226 'scr':24,79,100,141,196 'screw':27 'set':131 'sheet':216 'situat':113 'snubber':211 'space':21,34 'speed':177 'stall':167 'state':76 'steadi':75 'surg':97 'switch':148 'termin':28 'trace':3 'track':20,31 'trigger':193,206 'tropic':46 'turn':201 'unabl':199 'use':32,82,145,208 'vari':230 've':189 'watt':66 'yes':1 'zero':139,219 'zero-cross':138"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://aussie.zone/comment/4007716"
  +editedAt: null
  +createdAt: DateTimeImmutable @1698867444 {#1945
    date: 2023-11-01 20:37:24.0 +01:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
5 DENIED edit 
App\Entity\Magazine {#312
  +icon: Proxies\__CG__\App\Entity\Image {#293 …}
  +name: "electronics@discuss.tchncs.de"
  +title: "electronics"
  +description: """
    **Projects, pictures, industry discussions and news about electronic engineering & component-level electronic circuits.**\n
    \n
    Rules\n
    -----\n
    \n
    1: Be nice.\n
    \n
    2: Be on-topic (eg: *Electronic*, not *electrical*).\n
    \n
    3: No commercial stuff, buying, selling or valuations.\n
    \n
    4: No circuit design or repair, tools or component questions.\n
    \n
    5: No excessively promoting your own sites, social media, videos etc.\n
    \n
    ---\n
    \n
    *Ask questions in [discuss.tchncs.de/c/askelectronics](https://discuss.tchncs.de/c/askelectronics)*\n
    \n
    ---
    """
  +rules: null
  +subscriptionsCount: 1
  +entryCount: 43
  +entryCommentCount: 201
  +postCount: 1
  +postCommentCount: 3
  +isAdult: false
  +customCss: null
  +lastActive: DateTime @1723220252 {#320
    date: 2024-08-09 18:17:32.0 +02:00
  }
  +markedForDeletionAt: null
  +tags: null
  +moderators: Doctrine\ORM\PersistentCollection {#284 …}
  +ownershipRequests: Doctrine\ORM\PersistentCollection {#280 …}
  +moderatorRequests: Doctrine\ORM\PersistentCollection {#269 …}
  +entries: Doctrine\ORM\PersistentCollection {#227 …}
  +posts: Doctrine\ORM\PersistentCollection {#185 …}
  +subscriptions: Doctrine\ORM\PersistentCollection {#247 …}
  +bans: Doctrine\ORM\PersistentCollection {#164 …}
  +reports: Doctrine\ORM\PersistentCollection {#150 …}
  +badges: Doctrine\ORM\PersistentCollection {#128 …}
  +logs: Doctrine\ORM\PersistentCollection {#118 …}
  +awards: Doctrine\ORM\PersistentCollection {#107 …}
  +categories: Doctrine\ORM\PersistentCollection {#94 …}
  -id: 5
  +apId: "electronics@discuss.tchncs.de"
  +apProfileId: "https://discuss.tchncs.de/c/electronics"
  +apPublicUrl: "https://discuss.tchncs.de/c/electronics"
  +apFollowersUrl: "https://discuss.tchncs.de/c/electronics/followers"
  +apInboxUrl: "https://discuss.tchncs.de/inbox"
  +apDomain: "discuss.tchncs.de"
  +apPreferredUsername: "electronics"
  +apDiscoverable: true
  +apManuallyApprovesFollowers: null
  +privateKey: null
  +publicKey: null
  +apFetchedAt: DateTime @1719675646 {#321
    date: 2024-06-29 17:40:46.0 +02:00
  }
  +apDeletedAt: null
  +apTimeoutAt: null
  +visibility: "visible             "
  +createdAt: DateTimeImmutable @1686642591 {#315
    date: 2023-06-13 09:49:51.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS DENIED 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details