GET https://kbin.spritesserver.nl/index.php/u/@lightrush@lemmy.ca/threads/commented

Response
200 OK
IP
216.73.216.103
Profiled on
Token
bdd96c

Security

Token

There is no security token.

Firewall

main Name
Security enabled
Stateless

Configuration

Key Value
provider security.user.provider.concrete.app_user_provider
context main
entry_point App\Security\KbinAuthenticator
user_checker App\Security\UserChecker
access_denied_handler (none)
access_denied_url (none)
authenticators 
[
  "two_factor"
  "remember_me"
  "App\Security\KbinAuthenticator"
  "App\Security\FacebookAuthenticator"
  "App\Security\GoogleAuthenticator"
  "App\Security\GithubAuthenticator"
  "App\Security\KeycloakAuthenticator"
]

Listeners

Listener Duration Response 
Symfony\Component\Security\Http\Firewall\ChannelListener {#723
  -map: Symfony\Component\Security\Http\AccessMap {#722 …}
  -logger: Monolog\Logger {#783 …}
  -httpPort: 80
  -httpsPort: 443
}
 0.00 ms (none) 
Symfony\Component\Security\Http\Firewall\ContextListener {#706
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\TokenStorage {#1017 …}
  -sessionKey: "_security_main"
  -logger: Monolog\Logger {#783 …}
  -userProviders: Symfony\Component\DependencyInjection\Argument\RewindableGenerator {#705 …}
  -dispatcher: Symfony\Component\EventDispatcher\Debug\TraceableEventDispatcher {#747 …}
  -registered: false
  -trustResolver: Scheb\TwoFactorBundle\Security\Authentication\AuthenticationTrustResolver {#780 …}
  -sessionTrackerEnabler: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage::enableUsageTracking(): void {#703 …}
}
 27.11 ms (none) 
Symfony\Component\Security\Http\Firewall\AuthenticatorManagerListener {#584
  -authenticatorManager: Symfony\Component\Security\Http\Authentication\AuthenticatorManager {#595 …}
}
 0.00 ms (none) 
Scheb\TwoFactorBundle\Security\Http\Firewall\TwoFactorAccessListener {#582
  -twoFactorFirewallConfig: Scheb\TwoFactorBundle\Security\TwoFactor\TwoFactorFirewallConfig {#842 …}
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …}
  -twoFactorAccessDecider: Scheb\TwoFactorBundle\Security\Authorization\TwoFactorAccessDecider {#581 …}
}
 0.05 ms (none) 
Symfony\Component\Security\Http\Firewall\AccessListener {#579
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …}
  -accessDecisionManager: Symfony\Component\Security\Core\Authorization\TraceableAccessDecisionManager {#937 …}
  -map: Symfony\Component\Security\Http\AccessMap {#722 …}
}
 0.00 ms (none) 
Symfony\Component\Security\Http\Firewall\LogoutListener {#786
  -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …}
  -options: [
    "csrf_parameter" => "_csrf_token"
    "csrf_token_id" => "logout"
    "logout_path" => "app_logout"
  ]
  -httpUtils: Symfony\Component\Security\Http\HttpUtils {#841 …}
  -csrfTokenManager: Symfony\Component\Security\Csrf\CsrfTokenManager {#1015 …}
  -eventDispatcher: Symfony\Component\EventDispatcher\Debug\TraceableEventDispatcher {#747 …}
}
 0.00 ms (none)

Authenticators

No authenticators have been recorded. Check previous profiles on your authentication endpoint.

Access Decision

affirmative Strategy
# Voter class
1 
"Symfony\Component\Security\Core\Authorization\Voter\AuthenticatedVoter"
2 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
3 
"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
4 
"Symfony\Component\Security\Core\Authorization\Voter\ExpressionVoter"
5 
"App\Security\Voter\EntryCommentVoter"
6 
"App\Security\Voter\EntryVoter"
7 
"App\Security\Voter\MagazineVoter"
8 
"App\Security\Voter\MessageThreadVoter"
9 
"App\Security\Voter\MessageVoter"
10 
"App\Security\Voter\NotificationVoter"
11 
"App\Security\Voter\OAuth2UserConsentVoter"
12 
"App\Security\Voter\PostCommentVoter"
13 
"App\Security\Voter\PostVoter"
14 
"App\Security\Voter\UserVoter"

Access decision log

# Result Attributes Object
1 DENIED ROLE_USER 
null
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
2 DENIED moderate 
App\Entity\Entry {#2360
  +user: App\Entity\User {#264 …}
  +magazine: Proxies\__CG__\App\Entity\Magazine {#2377 …}
  +image: null
  +domain: Proxies\__CG__\App\Entity\Domain {#2467 …}
  +slug: "Another-successful-Honeywell-T6-install"
  +title: "Another successful Honeywell T6 install"
  +url: "https://lemmy.ca/pictrs/image/725edbe9-9d87-4169-a62e-d47efaab6872.jpeg"
  +body: """
    ![](https://lemmy.ca/pictrs/image/245cbb54-5920-43a9-8c0a-312c0cbfc5ca.png)\n
    \n
    > Here we go. The setup was pretty trivial. The setup for the Zooz GPIO Z-Wave adapter for Yellow was trivial. Adding the T6 was trivial too. I had to install 2x Z-Wave smart plugs to extend the network from where the Yellow is to where the thermostat is. I used Leviton Z-Wave smart plugs. Finally I added the automation I wanted this whole thing for. Seems to work ™\n
    > \n
    > The only downside I can see so far is that the T6 doesn’t support multi-speed fan (G1/G2/G3 wiring) so I had to choose one of the speeds while wiring and I can’t use the rest. From what I can tell Ecobee seems to be able to use G1/2/3 but I’m not ready to give up on the ethernet-independent operation T6 and Z-Wave allow to have multiple fan speeds.\n
    > \n
    > Does anyone know if there’s a (non-retail) variant of the T6 that supports multi-speed fan?\n
    \n
    I needed some thermostat automation done and I stumbled upon [this thread.](https://community.home-assistant.io/t/which-thermostat-is-most-home-assistant-friendly-ecobee/632022) I just attempted this and it went about as smoothly as I can imagine. If you’re also in need of an offline solution, the Z-Wave version of the Honeywell T6 seems to do the job.\n
    \n
    #homeassistant #zwave #thermostat #homeautomation
    """
  +type: "image"
  +lang: "en"
  +isOc: false
  +hasEmbed: true
  +commentCount: 32
  +favouriteCount: 119
  +score: 0
  +isAdult: false
  +sticky: false
  +lastActive: DateTime @1719276364 {#2455
    date: 2024-06-25 02:46:04.0 +02:00
  }
  +ip: null
  +adaAmount: 0
  +tags: null
  +mentions: null
  +comments: Doctrine\ORM\PersistentCollection {#2363 …}
  +votes: Doctrine\ORM\PersistentCollection {#2372 …}
  +reports: Doctrine\ORM\PersistentCollection {#2386 …}
  +favourites: Doctrine\ORM\PersistentCollection {#2385 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2378 …}
  +badges: Doctrine\ORM\PersistentCollection {#2381 …}
  +children: []
  -id: 27764
  -titleTs: "'anoth':1 'honeywel':3 'instal':5 'success':2 't6':4"
  -bodyTs: "'/pictrs/image/245cbb54-5920-43a9-8c0a-312c0cbfc5ca.png)':3 '/t/which-thermostat-is-most-home-assistant-friendly-ecobee/632022)':189 '2x':36 'abl':126 'ad':26,66 'adapt':21 'allow':149 'also':207 'anyon':156 'attempt':192 'autom':68,179 'choos':103 'community.home-assistant.io':188 'community.home-assistant.io/t/which-thermostat-is-most-home-assistant-friendly-ecobee/632022)':187 'doesn':90 'done':180 'downsid':80 'ecobe':122 'ethernet':141 'ethernet-independ':140 'extend':43 'fan':96,153,174 'far':85 'final':64 'g1/2/3':129 'g1/g2/g3':97 'give':136 'go':6 'gpio':17 'homeassist':228 'homeautom':231 'honeywel':221 'imagin':203 'independ':142 'instal':35 'job':227 'know':157 'lemmy.ca':2 'lemmy.ca/pictrs/image/245cbb54-5920-43a9-8c0a-312c0cbfc5ca.png)':1 'leviton':58 'm':132 'multi':94,172 'multi-spe':93,171 'multipl':152 'need':176,209 'network':45 'non':163 'non-retail':162 'offlin':212 'one':104 'oper':143 'plug':41,63 'pretti':10 're':206 'readi':134 'rest':116 'retail':164 'see':83 'seem':75,123,223 'setup':8,13 'smart':40,62 'smooth':199 'solut':213 'speed':95,107,154,173 'stumbl':183 'support':92,170 't6':28,89,144,168,222 'tell':121 'thermostat':54,178,230 'thing':73 'thread':186 'trivial':11,25,30 'upon':184 'use':57,114,128 'variant':165 'version':218 'want':70 'wave':20,39,61,148,217 'went':196 'whole':72 'wire':98,109 'work':77 'yellow':23,49 'z':19,38,60,147,216 'z-wave':18,37,59,146,215 'zooz':16 'zwave':229"
  +cross: false
  +upVotes: 0
  +downVotes: 0
  +ranking: 1704684169
  +visibility: "visible             "
  +apId: "https://lemmy.ca/post/12804622"
  +editedAt: DateTimeImmutable @1712623827 {#2452
    date: 2024-04-09 02:50:27.0 +02:00
  }
  +createdAt: DateTimeImmutable @1704597769 {#2370
    date: 2024-01-07 04:22:49.0 +01:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS DENIED 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
3 DENIED edit 
App\Entity\Entry {#2360
  +user: App\Entity\User {#264 …}
  +magazine: Proxies\__CG__\App\Entity\Magazine {#2377 …}
  +image: null
  +domain: Proxies\__CG__\App\Entity\Domain {#2467 …}
  +slug: "Another-successful-Honeywell-T6-install"
  +title: "Another successful Honeywell T6 install"
  +url: "https://lemmy.ca/pictrs/image/725edbe9-9d87-4169-a62e-d47efaab6872.jpeg"
  +body: """
    ![](https://lemmy.ca/pictrs/image/245cbb54-5920-43a9-8c0a-312c0cbfc5ca.png)\n
    \n
    > Here we go. The setup was pretty trivial. The setup for the Zooz GPIO Z-Wave adapter for Yellow was trivial. Adding the T6 was trivial too. I had to install 2x Z-Wave smart plugs to extend the network from where the Yellow is to where the thermostat is. I used Leviton Z-Wave smart plugs. Finally I added the automation I wanted this whole thing for. Seems to work ™\n
    > \n
    > The only downside I can see so far is that the T6 doesn’t support multi-speed fan (G1/G2/G3 wiring) so I had to choose one of the speeds while wiring and I can’t use the rest. From what I can tell Ecobee seems to be able to use G1/2/3 but I’m not ready to give up on the ethernet-independent operation T6 and Z-Wave allow to have multiple fan speeds.\n
    > \n
    > Does anyone know if there’s a (non-retail) variant of the T6 that supports multi-speed fan?\n
    \n
    I needed some thermostat automation done and I stumbled upon [this thread.](https://community.home-assistant.io/t/which-thermostat-is-most-home-assistant-friendly-ecobee/632022) I just attempted this and it went about as smoothly as I can imagine. If you’re also in need of an offline solution, the Z-Wave version of the Honeywell T6 seems to do the job.\n
    \n
    #homeassistant #zwave #thermostat #homeautomation
    """
  +type: "image"
  +lang: "en"
  +isOc: false
  +hasEmbed: true
  +commentCount: 32
  +favouriteCount: 119
  +score: 0
  +isAdult: false
  +sticky: false
  +lastActive: DateTime @1719276364 {#2455
    date: 2024-06-25 02:46:04.0 +02:00
  }
  +ip: null
  +adaAmount: 0
  +tags: null
  +mentions: null
  +comments: Doctrine\ORM\PersistentCollection {#2363 …}
  +votes: Doctrine\ORM\PersistentCollection {#2372 …}
  +reports: Doctrine\ORM\PersistentCollection {#2386 …}
  +favourites: Doctrine\ORM\PersistentCollection {#2385 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2378 …}
  +badges: Doctrine\ORM\PersistentCollection {#2381 …}
  +children: []
  -id: 27764
  -titleTs: "'anoth':1 'honeywel':3 'instal':5 'success':2 't6':4"
  -bodyTs: "'/pictrs/image/245cbb54-5920-43a9-8c0a-312c0cbfc5ca.png)':3 '/t/which-thermostat-is-most-home-assistant-friendly-ecobee/632022)':189 '2x':36 'abl':126 'ad':26,66 'adapt':21 'allow':149 'also':207 'anyon':156 'attempt':192 'autom':68,179 'choos':103 'community.home-assistant.io':188 'community.home-assistant.io/t/which-thermostat-is-most-home-assistant-friendly-ecobee/632022)':187 'doesn':90 'done':180 'downsid':80 'ecobe':122 'ethernet':141 'ethernet-independ':140 'extend':43 'fan':96,153,174 'far':85 'final':64 'g1/2/3':129 'g1/g2/g3':97 'give':136 'go':6 'gpio':17 'homeassist':228 'homeautom':231 'honeywel':221 'imagin':203 'independ':142 'instal':35 'job':227 'know':157 'lemmy.ca':2 'lemmy.ca/pictrs/image/245cbb54-5920-43a9-8c0a-312c0cbfc5ca.png)':1 'leviton':58 'm':132 'multi':94,172 'multi-spe':93,171 'multipl':152 'need':176,209 'network':45 'non':163 'non-retail':162 'offlin':212 'one':104 'oper':143 'plug':41,63 'pretti':10 're':206 'readi':134 'rest':116 'retail':164 'see':83 'seem':75,123,223 'setup':8,13 'smart':40,62 'smooth':199 'solut':213 'speed':95,107,154,173 'stumbl':183 'support':92,170 't6':28,89,144,168,222 'tell':121 'thermostat':54,178,230 'thing':73 'thread':186 'trivial':11,25,30 'upon':184 'use':57,114,128 'variant':165 'version':218 'want':70 'wave':20,39,61,148,217 'went':196 'whole':72 'wire':98,109 'work':77 'yellow':23,49 'z':19,38,60,147,216 'z-wave':18,37,59,146,215 'zooz':16 'zwave':229"
  +cross: false
  +upVotes: 0
  +downVotes: 0
  +ranking: 1704684169
  +visibility: "visible             "
  +apId: "https://lemmy.ca/post/12804622"
  +editedAt: DateTimeImmutable @1712623827 {#2452
    date: 2024-04-09 02:50:27.0 +02:00
  }
  +createdAt: DateTimeImmutable @1704597769 {#2370
    date: 2024-01-07 04:22:49.0 +01:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS DENIED 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
4 DENIED moderate 
App\Entity\Entry {#2360
  +user: App\Entity\User {#264 …}
  +magazine: Proxies\__CG__\App\Entity\Magazine {#2377 …}
  +image: null
  +domain: Proxies\__CG__\App\Entity\Domain {#2467 …}
  +slug: "Another-successful-Honeywell-T6-install"
  +title: "Another successful Honeywell T6 install"
  +url: "https://lemmy.ca/pictrs/image/725edbe9-9d87-4169-a62e-d47efaab6872.jpeg"
  +body: """
    ![](https://lemmy.ca/pictrs/image/245cbb54-5920-43a9-8c0a-312c0cbfc5ca.png)\n
    \n
    > Here we go. The setup was pretty trivial. The setup for the Zooz GPIO Z-Wave adapter for Yellow was trivial. Adding the T6 was trivial too. I had to install 2x Z-Wave smart plugs to extend the network from where the Yellow is to where the thermostat is. I used Leviton Z-Wave smart plugs. Finally I added the automation I wanted this whole thing for. Seems to work ™\n
    > \n
    > The only downside I can see so far is that the T6 doesn’t support multi-speed fan (G1/G2/G3 wiring) so I had to choose one of the speeds while wiring and I can’t use the rest. From what I can tell Ecobee seems to be able to use G1/2/3 but I’m not ready to give up on the ethernet-independent operation T6 and Z-Wave allow to have multiple fan speeds.\n
    > \n
    > Does anyone know if there’s a (non-retail) variant of the T6 that supports multi-speed fan?\n
    \n
    I needed some thermostat automation done and I stumbled upon [this thread.](https://community.home-assistant.io/t/which-thermostat-is-most-home-assistant-friendly-ecobee/632022) I just attempted this and it went about as smoothly as I can imagine. If you’re also in need of an offline solution, the Z-Wave version of the Honeywell T6 seems to do the job.\n
    \n
    #homeassistant #zwave #thermostat #homeautomation
    """
  +type: "image"
  +lang: "en"
  +isOc: false
  +hasEmbed: true
  +commentCount: 32
  +favouriteCount: 119
  +score: 0
  +isAdult: false
  +sticky: false
  +lastActive: DateTime @1719276364 {#2455
    date: 2024-06-25 02:46:04.0 +02:00
  }
  +ip: null
  +adaAmount: 0
  +tags: null
  +mentions: null
  +comments: Doctrine\ORM\PersistentCollection {#2363 …}
  +votes: Doctrine\ORM\PersistentCollection {#2372 …}
  +reports: Doctrine\ORM\PersistentCollection {#2386 …}
  +favourites: Doctrine\ORM\PersistentCollection {#2385 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2378 …}
  +badges: Doctrine\ORM\PersistentCollection {#2381 …}
  +children: []
  -id: 27764
  -titleTs: "'anoth':1 'honeywel':3 'instal':5 'success':2 't6':4"
  -bodyTs: "'/pictrs/image/245cbb54-5920-43a9-8c0a-312c0cbfc5ca.png)':3 '/t/which-thermostat-is-most-home-assistant-friendly-ecobee/632022)':189 '2x':36 'abl':126 'ad':26,66 'adapt':21 'allow':149 'also':207 'anyon':156 'attempt':192 'autom':68,179 'choos':103 'community.home-assistant.io':188 'community.home-assistant.io/t/which-thermostat-is-most-home-assistant-friendly-ecobee/632022)':187 'doesn':90 'done':180 'downsid':80 'ecobe':122 'ethernet':141 'ethernet-independ':140 'extend':43 'fan':96,153,174 'far':85 'final':64 'g1/2/3':129 'g1/g2/g3':97 'give':136 'go':6 'gpio':17 'homeassist':228 'homeautom':231 'honeywel':221 'imagin':203 'independ':142 'instal':35 'job':227 'know':157 'lemmy.ca':2 'lemmy.ca/pictrs/image/245cbb54-5920-43a9-8c0a-312c0cbfc5ca.png)':1 'leviton':58 'm':132 'multi':94,172 'multi-spe':93,171 'multipl':152 'need':176,209 'network':45 'non':163 'non-retail':162 'offlin':212 'one':104 'oper':143 'plug':41,63 'pretti':10 're':206 'readi':134 'rest':116 'retail':164 'see':83 'seem':75,123,223 'setup':8,13 'smart':40,62 'smooth':199 'solut':213 'speed':95,107,154,173 'stumbl':183 'support':92,170 't6':28,89,144,168,222 'tell':121 'thermostat':54,178,230 'thing':73 'thread':186 'trivial':11,25,30 'upon':184 'use':57,114,128 'variant':165 'version':218 'want':70 'wave':20,39,61,148,217 'went':196 'whole':72 'wire':98,109 'work':77 'yellow':23,49 'z':19,38,60,147,216 'z-wave':18,37,59,146,215 'zooz':16 'zwave':229"
  +cross: false
  +upVotes: 0
  +downVotes: 0
  +ranking: 1704684169
  +visibility: "visible             "
  +apId: "https://lemmy.ca/post/12804622"
  +editedAt: DateTimeImmutable @1712623827 {#2452
    date: 2024-04-09 02:50:27.0 +02:00
  }
  +createdAt: DateTimeImmutable @1704597769 {#2370
    date: 2024-01-07 04:22:49.0 +01:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS DENIED 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
5 DENIED ROLE_USER 
null
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
 ACCESS DENIED 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
6 DENIED moderate 
App\Entity\Entry {#1562
  +user: App\Entity\User {#264 …}
  +magazine: Proxies\__CG__\App\Entity\Magazine {#1719 …}
  +image: Proxies\__CG__\App\Entity\Image {#1724 …}
  +domain: Proxies\__CG__\App\Entity\Domain {#1630 …}
  +slug: "SOLVED-A-pull-up-resistor-increases-the-low-side-of-a"
  +title: "[SOLVED] A pull-up resistor increases the low side of a signal, how can I counteract it?"
  +url: "https://electronics.stackexchange.com/q/670924/107963"
  +body: """
    Solution\n
    --------\n
    \n
    Using an open drain buffer like the `74LVC1G07` did the trick. Note that this part only works for inputs with a pull-up resistor. There are other parts from the same lineup that can work with any input.\n
    \n
    Problem\n
    -------\n
    \n
    > I have an ebike computer that has two inputs that accept square wave signals. The range is 0-5V. One of the inputs has no pull-up/down resistors on it. When I hook up a device producing signal, the signal is detected correctly. Both highs and lows are detected correctly. The other input has a built-in pull-up resistor. When I hook the same signal to it, only the high side is detected. Measuring the voltage of the low side, it's a bit higher than when hooked to the other input and I'm guessing it isn't crossing the low threshold the computer expects in order to register the low.\n
    \n
    > Am I right in thinking that the pull-up resistor is increasing the lows?\n
    \n
    > Is it possible to counteract the internal pull-up resistor by hooking a pull-down resistor to the input?\n
    \n
    > I'm a software guy with decent soldering skills and minimal knowledge in electronics so please answer like I'm not the brightest electronic bulb on the tree.\n
    \n
    > Thank you in advance!\n
    \n
    Cross-posting my question from StackExchange.
    """
  +type: "link"
  +lang: "en"
  +isOc: false
  +hasEmbed: false
  +commentCount: 6
  +favouriteCount: 3
  +score: 0
  +isAdult: false
  +sticky: false
  +lastActive: DateTime @1687328506 {#1567
    date: 2023-06-21 08:21:46.0 +02:00
  }
  +ip: null
  +adaAmount: 0
  +tags: null
  +mentions: null
  +comments: Doctrine\ORM\PersistentCollection {#1629 …}
  +votes: Doctrine\ORM\PersistentCollection {#1626 …}
  +reports: Doctrine\ORM\PersistentCollection {#1625 …}
  +favourites: Doctrine\ORM\PersistentCollection {#2422 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2463 …}
  +badges: Doctrine\ORM\PersistentCollection {#2470 …}
  +children: []
  -id: 132
  -titleTs: "'counteract':17 'increas':7 'low':9 'pull':4 'pull-up':3 'resistor':6 'side':10 'signal':13 'solv':1"
  -bodyTs: "'-5':60 '/down':71 '0':59 '74lvc1g07':9 'accept':52 'advanc':227 'answer':212 'bit':131 'brightest':218 'buffer':6 'built':101 'built-in':100 'bulb':220 'comput':46,152 'correct':87,94 'counteract':179 'cross':147,229 'cross-post':228 'decent':202 'detect':86,93,120 'devic':80 'drain':5 'ebik':45 'electron':209,219 'expect':153 'guess':143 'guy':200 'high':89,117 'higher':132 'hook':77,109,135,187 'increas':172 'input':20,40,50,65,97,139,195 'intern':181 'isn':145 'knowledg':207 'like':7,213 'lineup':34 'low':91,126,149,159,174 'm':142,197,215 'measur':121 'minim':206 'note':13 'one':62 'open':4 'order':155 'part':16,30 'pleas':211 'possibl':177 'post':230 'problem':41 'produc':81 'pull':24,69,104,168,183,190 'pull-down':189 'pull-up':23,68,103,167,182 'question':232 'rang':57 'regist':157 'resistor':26,72,106,170,185,192 'right':162 'side':118,127 'signal':55,82,84,112 'skill':204 'softwar':199 'solder':203 'solut':1 'squar':53 'stackexchang':234 'thank':224 'think':164 'threshold':150 'tree':223 'trick':12 'two':49 'use':2 'v':61 'voltag':123 'wave':54 'work':18,37"
  +cross: false
  +upVotes: 0
  +downVotes: 0
  +ranking: 1687130578
  +visibility: "visible             "
  +apId: "https://lemmy.ca/post/738378"
  +editedAt: DateTimeImmutable @1687363171 {#1414
    date: 2023-06-21 17:59:31.0 +02:00
  }
  +createdAt: DateTimeImmutable @1687102078 {#1548
    date: 2023-06-18 17:27:58.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS DENIED 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
7 DENIED edit 
App\Entity\Entry {#1562
  +user: App\Entity\User {#264 …}
  +magazine: Proxies\__CG__\App\Entity\Magazine {#1719 …}
  +image: Proxies\__CG__\App\Entity\Image {#1724 …}
  +domain: Proxies\__CG__\App\Entity\Domain {#1630 …}
  +slug: "SOLVED-A-pull-up-resistor-increases-the-low-side-of-a"
  +title: "[SOLVED] A pull-up resistor increases the low side of a signal, how can I counteract it?"
  +url: "https://electronics.stackexchange.com/q/670924/107963"
  +body: """
    Solution\n
    --------\n
    \n
    Using an open drain buffer like the `74LVC1G07` did the trick. Note that this part only works for inputs with a pull-up resistor. There are other parts from the same lineup that can work with any input.\n
    \n
    Problem\n
    -------\n
    \n
    > I have an ebike computer that has two inputs that accept square wave signals. The range is 0-5V. One of the inputs has no pull-up/down resistors on it. When I hook up a device producing signal, the signal is detected correctly. Both highs and lows are detected correctly. The other input has a built-in pull-up resistor. When I hook the same signal to it, only the high side is detected. Measuring the voltage of the low side, it's a bit higher than when hooked to the other input and I'm guessing it isn't crossing the low threshold the computer expects in order to register the low.\n
    \n
    > Am I right in thinking that the pull-up resistor is increasing the lows?\n
    \n
    > Is it possible to counteract the internal pull-up resistor by hooking a pull-down resistor to the input?\n
    \n
    > I'm a software guy with decent soldering skills and minimal knowledge in electronics so please answer like I'm not the brightest electronic bulb on the tree.\n
    \n
    > Thank you in advance!\n
    \n
    Cross-posting my question from StackExchange.
    """
  +type: "link"
  +lang: "en"
  +isOc: false
  +hasEmbed: false
  +commentCount: 6
  +favouriteCount: 3
  +score: 0
  +isAdult: false
  +sticky: false
  +lastActive: DateTime @1687328506 {#1567
    date: 2023-06-21 08:21:46.0 +02:00
  }
  +ip: null
  +adaAmount: 0
  +tags: null
  +mentions: null
  +comments: Doctrine\ORM\PersistentCollection {#1629 …}
  +votes: Doctrine\ORM\PersistentCollection {#1626 …}
  +reports: Doctrine\ORM\PersistentCollection {#1625 …}
  +favourites: Doctrine\ORM\PersistentCollection {#2422 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2463 …}
  +badges: Doctrine\ORM\PersistentCollection {#2470 …}
  +children: []
  -id: 132
  -titleTs: "'counteract':17 'increas':7 'low':9 'pull':4 'pull-up':3 'resistor':6 'side':10 'signal':13 'solv':1"
  -bodyTs: "'-5':60 '/down':71 '0':59 '74lvc1g07':9 'accept':52 'advanc':227 'answer':212 'bit':131 'brightest':218 'buffer':6 'built':101 'built-in':100 'bulb':220 'comput':46,152 'correct':87,94 'counteract':179 'cross':147,229 'cross-post':228 'decent':202 'detect':86,93,120 'devic':80 'drain':5 'ebik':45 'electron':209,219 'expect':153 'guess':143 'guy':200 'high':89,117 'higher':132 'hook':77,109,135,187 'increas':172 'input':20,40,50,65,97,139,195 'intern':181 'isn':145 'knowledg':207 'like':7,213 'lineup':34 'low':91,126,149,159,174 'm':142,197,215 'measur':121 'minim':206 'note':13 'one':62 'open':4 'order':155 'part':16,30 'pleas':211 'possibl':177 'post':230 'problem':41 'produc':81 'pull':24,69,104,168,183,190 'pull-down':189 'pull-up':23,68,103,167,182 'question':232 'rang':57 'regist':157 'resistor':26,72,106,170,185,192 'right':162 'side':118,127 'signal':55,82,84,112 'skill':204 'softwar':199 'solder':203 'solut':1 'squar':53 'stackexchang':234 'thank':224 'think':164 'threshold':150 'tree':223 'trick':12 'two':49 'use':2 'v':61 'voltag':123 'wave':54 'work':18,37"
  +cross: false
  +upVotes: 0
  +downVotes: 0
  +ranking: 1687130578
  +visibility: "visible             "
  +apId: "https://lemmy.ca/post/738378"
  +editedAt: DateTimeImmutable @1687363171 {#1414
    date: 2023-06-21 17:59:31.0 +02:00
  }
  +createdAt: DateTimeImmutable @1687102078 {#1548
    date: 2023-06-18 17:27:58.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS DENIED 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details
8 DENIED moderate 
App\Entity\Entry {#1562
  +user: App\Entity\User {#264 …}
  +magazine: Proxies\__CG__\App\Entity\Magazine {#1719 …}
  +image: Proxies\__CG__\App\Entity\Image {#1724 …}
  +domain: Proxies\__CG__\App\Entity\Domain {#1630 …}
  +slug: "SOLVED-A-pull-up-resistor-increases-the-low-side-of-a"
  +title: "[SOLVED] A pull-up resistor increases the low side of a signal, how can I counteract it?"
  +url: "https://electronics.stackexchange.com/q/670924/107963"
  +body: """
    Solution\n
    --------\n
    \n
    Using an open drain buffer like the `74LVC1G07` did the trick. Note that this part only works for inputs with a pull-up resistor. There are other parts from the same lineup that can work with any input.\n
    \n
    Problem\n
    -------\n
    \n
    > I have an ebike computer that has two inputs that accept square wave signals. The range is 0-5V. One of the inputs has no pull-up/down resistors on it. When I hook up a device producing signal, the signal is detected correctly. Both highs and lows are detected correctly. The other input has a built-in pull-up resistor. When I hook the same signal to it, only the high side is detected. Measuring the voltage of the low side, it's a bit higher than when hooked to the other input and I'm guessing it isn't crossing the low threshold the computer expects in order to register the low.\n
    \n
    > Am I right in thinking that the pull-up resistor is increasing the lows?\n
    \n
    > Is it possible to counteract the internal pull-up resistor by hooking a pull-down resistor to the input?\n
    \n
    > I'm a software guy with decent soldering skills and minimal knowledge in electronics so please answer like I'm not the brightest electronic bulb on the tree.\n
    \n
    > Thank you in advance!\n
    \n
    Cross-posting my question from StackExchange.
    """
  +type: "link"
  +lang: "en"
  +isOc: false
  +hasEmbed: false
  +commentCount: 6
  +favouriteCount: 3
  +score: 0
  +isAdult: false
  +sticky: false
  +lastActive: DateTime @1687328506 {#1567
    date: 2023-06-21 08:21:46.0 +02:00
  }
  +ip: null
  +adaAmount: 0
  +tags: null
  +mentions: null
  +comments: Doctrine\ORM\PersistentCollection {#1629 …}
  +votes: Doctrine\ORM\PersistentCollection {#1626 …}
  +reports: Doctrine\ORM\PersistentCollection {#1625 …}
  +favourites: Doctrine\ORM\PersistentCollection {#2422 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2463 …}
  +badges: Doctrine\ORM\PersistentCollection {#2470 …}
  +children: []
  -id: 132
  -titleTs: "'counteract':17 'increas':7 'low':9 'pull':4 'pull-up':3 'resistor':6 'side':10 'signal':13 'solv':1"
  -bodyTs: "'-5':60 '/down':71 '0':59 '74lvc1g07':9 'accept':52 'advanc':227 'answer':212 'bit':131 'brightest':218 'buffer':6 'built':101 'built-in':100 'bulb':220 'comput':46,152 'correct':87,94 'counteract':179 'cross':147,229 'cross-post':228 'decent':202 'detect':86,93,120 'devic':80 'drain':5 'ebik':45 'electron':209,219 'expect':153 'guess':143 'guy':200 'high':89,117 'higher':132 'hook':77,109,135,187 'increas':172 'input':20,40,50,65,97,139,195 'intern':181 'isn':145 'knowledg':207 'like':7,213 'lineup':34 'low':91,126,149,159,174 'm':142,197,215 'measur':121 'minim':206 'note':13 'one':62 'open':4 'order':155 'part':16,30 'pleas':211 'possibl':177 'post':230 'problem':41 'produc':81 'pull':24,69,104,168,183,190 'pull-down':189 'pull-up':23,68,103,167,182 'question':232 'rang':57 'regist':157 'resistor':26,72,106,170,185,192 'right':162 'side':118,127 'signal':55,82,84,112 'skill':204 'softwar':199 'solder':203 'solut':1 'squar':53 'stackexchang':234 'thank':224 'think':164 'threshold':150 'tree':223 'trick':12 'two':49 'use':2 'v':61 'voltag':123 'wave':54 'work':18,37"
  +cross: false
  +upVotes: 0
  +downVotes: 0
  +ranking: 1687130578
  +visibility: "visible             "
  +apId: "https://lemmy.ca/post/738378"
  +editedAt: DateTimeImmutable @1687363171 {#1414
    date: 2023-06-21 17:59:31.0 +02:00
  }
  +createdAt: DateTimeImmutable @1687102078 {#1548
    date: 2023-06-18 17:27:58.0 +02:00
  }
}
 
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\EntryVoter"
 ACCESS DENIED 
"App\Security\Voter\MagazineVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageThreadVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\MessageVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\NotificationVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\OAuth2UserConsentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostCommentVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\PostVoter"
 ACCESS ABSTAIN 
"App\Security\Voter\UserVoter"
 ACCESS ABSTAIN
Show voter details