Symfony Profiler

Security

Token

There is no security token.

Firewall

main Name

Security enabled

Stateless

Configuration

Key	Value
provider	security.user.provider.concrete.app_user_provider
context	main
entry_point	App\Security\KbinAuthenticator
user_checker	App\Security\UserChecker
access_denied_handler	(none)
access_denied_url	(none)
authenticators	[`"two_factor" "remember_me" "App\Security\KbinAuthenticator" "App\Security\FacebookAuthenticator" "App\Security\GoogleAuthenticator" "App\Security\GithubAuthenticator" "App\Security\KeycloakAuthenticator"`]

Listeners

Listener	Duration	Response
Symfony\Component\Security\Http\Firewall\ChannelListener {#723`-map: Symfony\Component\Security\Http\AccessMap {#722 …} -logger: Monolog\Logger {#783 …} -httpPort: 80 -httpsPort: 443`}	0.00 ms	(none)
Symfony\Component\Security\Http\Firewall\ContextListener {#706-tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\TokenStorage {#1017 …} -sessionKey: "_security_main" -logger: Monolog\Logger {#783 …} -userProviders: Symfony\Component\DependencyInjection\Argument\RewindableGenerator {#705 …} -dispatcher: Symfony\Component\EventDispatcher\Debug\TraceableEventDispatcher {#747 …} -registered: false -trustResolver: Scheb\TwoFactorBundle\Security\Authentication\AuthenticationTrustResolver {#780 …} -sessionTrackerEnabler: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage::enableUsageTracking(): void {#703 …}}	3.87 ms	(none)
Symfony\Component\Security\Http\Firewall\AuthenticatorManagerListener {#584`-authenticatorManager: Symfony\Component\Security\Http\Authentication\AuthenticatorManager {#595 …}`}	0.00 ms	(none)
Scheb\TwoFactorBundle\Security\Http\Firewall\TwoFactorAccessListener {#582`-twoFactorFirewallConfig: Scheb\TwoFactorBundle\Security\TwoFactor\TwoFactorFirewallConfig {#842 …} -tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …} -twoFactorAccessDecider: Scheb\TwoFactorBundle\Security\Authorization\TwoFactorAccessDecider {#581 …}`}	0.20 ms	(none)
Symfony\Component\Security\Http\Firewall\AccessListener {#579`-tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …} -accessDecisionManager: Symfony\Component\Security\Core\Authorization\TraceableAccessDecisionManager {#937 …} -map: Symfony\Component\Security\Http\AccessMap {#722 …}`}	0.00 ms	(none)
Symfony\Component\Security\Http\Firewall\LogoutListener {#786`-tokenStorage: Symfony\Component\Security\Core\Authentication\Token\Storage\UsageTrackingTokenStorage {#1018 …} -options: [ "csrf_parameter" => "_csrf_token" "csrf_token_id" => "logout" "logout_path" => "app_logout" ] -httpUtils: Symfony\Component\Security\Http\HttpUtils {#841 …} -csrfTokenManager: Symfony\Component\Security\Csrf\CsrfTokenManager {#1015 …} -eventDispatcher: Symfony\Component\EventDispatcher\Debug\TraceableEventDispatcher {#747 …}`}	0.00 ms	(none)

Authenticators

No authenticators have been recorded. Check previous profiles on your authentication endpoint.

Access Decision

affirmative Strategy


"Symfony\Component\Security\Core\Authorization\Voter\AuthenticatedVoter"
"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
"Symfony\Component\Security\Core\Authorization\Voter\ExpressionVoter"
"App\Security\Voter\EntryCommentVoter"
"App\Security\Voter\EntryVoter"
"App\Security\Voter\MagazineVoter"
"App\Security\Voter\MessageThreadVoter"
"App\Security\Voter\MessageVoter"
"App\Security\Voter\NotificationVoter"
"App\Security\Voter\OAuth2UserConsentVoter"
"App\Security\Voter\PostCommentVoter"
"App\Security\Voter\PostVoter"
"App\Security\Voter\UserVoter"

#	Voter class
1	"Symfony\Component\Security\Core\Authorization\Voter\AuthenticatedVoter"
2	"Scheb\TwoFactorBundle\Security\Authorization\Voter\TwoFactorInProgressVoter"
3	"Symfony\Component\Security\Core\Authorization\Voter\RoleHierarchyVoter"
4	"Symfony\Component\Security\Core\Authorization\Voter\ExpressionVoter"
5	"App\Security\Voter\EntryCommentVoter"
6	"App\Security\Voter\EntryVoter"
7	"App\Security\Voter\MagazineVoter"
8	"App\Security\Voter\MessageThreadVoter"
9	"App\Security\Voter\MessageVoter"
10	"App\Security\Voter\NotificationVoter"
11	"App\Security\Voter\OAuth2UserConsentVoter"
12	"App\Security\Voter\PostCommentVoter"
13	"App\Security\Voter\PostVoter"
14	"App\Security\Voter\UserVoter"

Access decision log


null
"App\Security\Voter\UserVoter"
App\Entity\Entry {#2412
  +user: Proxies\__CG__\App\Entity\User {#1978 …}
  +magazine: App\Entity\Magazine {#264
    +icon: Proxies\__CG__\App\Entity\Image {#245 …}
    +name: "askelectronics@discuss.tchncs.de"
    +title: "askelectronics"
    +description: """
      **For questions about component-level electronic circuits, tools and equipment.**\n
      \n
      Rules\n
      -----\n
      \n
      1: Be nice.\n
      \n
      2: Be on-topic (eg: *Electronic*, not *electrical*).\n
      \n
      3: No commercial stuff, buying, selling or valuations.\n
      \n
      4: Be safe.\n
      \n
      ---
      """
    +rules: null
    +subscriptionsCount: 1
    +entryCount: 154
    +entryCommentCount: 1230
    +postCount: 1
    +postCommentCount: 4
    +isAdult: false
    +customCss: null
    +lastActive: DateTime @1729413608 {#274
      date: 2024-10-20 10:40:08.0 +02:00
    }
    +markedForDeletionAt: null
    +tags: null
    +moderators: Doctrine\ORM\PersistentCollection {#236 …}
    +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
    +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
    +entries: Doctrine\ORM\PersistentCollection {#179 …}
    +posts: Doctrine\ORM\PersistentCollection {#137 …}
    +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
    +bans: Doctrine\ORM\PersistentCollection {#116 …}
    +reports: Doctrine\ORM\PersistentCollection {#102 …}
    +badges: Doctrine\ORM\PersistentCollection {#80 …}
    +logs: Doctrine\ORM\PersistentCollection {#70 …}
    +awards: Doctrine\ORM\PersistentCollection {#1360 …}
    +categories: Doctrine\ORM\PersistentCollection {#1792 …}
    -id: 11
    +apId: "askelectronics@discuss.tchncs.de"
    +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
    +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
    +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
    +apInboxUrl: "https://discuss.tchncs.de/inbox"
    +apDomain: "discuss.tchncs.de"
    +apPreferredUsername: "askelectronics"
    +apDiscoverable: true
    +apManuallyApprovesFollowers: null
    +privateKey: null
    +publicKey: null
    +apFetchedAt: DateTime @1727247714 {#268
      date: 2024-09-25 09:01:54.0 +02:00
    }
    +apDeletedAt: null
    +apTimeoutAt: null
    +visibility: "visible             "
    +createdAt: DateTimeImmutable @1687144409 {#270
      date: 2023-06-19 05:13:29.0 +02:00
    }
  }
  +image: null
  +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
  +slug: "Housing-for-resistor"
  +title: "Housing for resistor?"
  +url: null
  +body: """
    I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
    \n
    I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
    """
  +type: "article"
  +lang: "en"
  +isOc: false
  +hasEmbed: false
  +commentCount: 8
  +favouriteCount: 5
  +score: 0
  +isAdult: false
  +sticky: false
  +lastActive: DateTime @1697273222 {#2418
    date: 2023-10-14 10:47:02.0 +02:00
  }
  +ip: null
  +adaAmount: 0
  +tags: null
  +mentions: null
  +comments: Doctrine\ORM\PersistentCollection {#1688 …}
  +votes: Doctrine\ORM\PersistentCollection {#1966 …}
  +reports: Doctrine\ORM\PersistentCollection {#1965 …}
  +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
  +badges: Doctrine\ORM\PersistentCollection {#2439 …}
  +children: []
  -id: 2581
  -titleTs: "'hous':1 'resistor':3"
  -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
  +cross: false
  +upVotes: 0
  +downVotes: 0
  +ranking: 1696440665
  +visibility: "visible             "
  +apId: "https://lemmy.world/post/6263071"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696389665 {#1858
    date: 2023-10-04 05:21:05.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\Entry {#2412
  +user: Proxies\__CG__\App\Entity\User {#1978 …}
  +magazine: App\Entity\Magazine {#264
    +icon: Proxies\__CG__\App\Entity\Image {#245 …}
    +name: "askelectronics@discuss.tchncs.de"
    +title: "askelectronics"
    +description: """
      **For questions about component-level electronic circuits, tools and equipment.**\n
      \n
      Rules\n
      -----\n
      \n
      1: Be nice.\n
      \n
      2: Be on-topic (eg: *Electronic*, not *electrical*).\n
      \n
      3: No commercial stuff, buying, selling or valuations.\n
      \n
      4: Be safe.\n
      \n
      ---
      """
    +rules: null
    +subscriptionsCount: 1
    +entryCount: 154
    +entryCommentCount: 1230
    +postCount: 1
    +postCommentCount: 4
    +isAdult: false
    +customCss: null
    +lastActive: DateTime @1729413608 {#274
      date: 2024-10-20 10:40:08.0 +02:00
    }
    +markedForDeletionAt: null
    +tags: null
    +moderators: Doctrine\ORM\PersistentCollection {#236 …}
    +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
    +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
    +entries: Doctrine\ORM\PersistentCollection {#179 …}
    +posts: Doctrine\ORM\PersistentCollection {#137 …}
    +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
    +bans: Doctrine\ORM\PersistentCollection {#116 …}
    +reports: Doctrine\ORM\PersistentCollection {#102 …}
    +badges: Doctrine\ORM\PersistentCollection {#80 …}
    +logs: Doctrine\ORM\PersistentCollection {#70 …}
    +awards: Doctrine\ORM\PersistentCollection {#1360 …}
    +categories: Doctrine\ORM\PersistentCollection {#1792 …}
    -id: 11
    +apId: "askelectronics@discuss.tchncs.de"
    +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
    +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
    +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
    +apInboxUrl: "https://discuss.tchncs.de/inbox"
    +apDomain: "discuss.tchncs.de"
    +apPreferredUsername: "askelectronics"
    +apDiscoverable: true
    +apManuallyApprovesFollowers: null
    +privateKey: null
    +publicKey: null
    +apFetchedAt: DateTime @1727247714 {#268
      date: 2024-09-25 09:01:54.0 +02:00
    }
    +apDeletedAt: null
    +apTimeoutAt: null
    +visibility: "visible             "
    +createdAt: DateTimeImmutable @1687144409 {#270
      date: 2023-06-19 05:13:29.0 +02:00
    }
  }
  +image: null
  +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
  +slug: "Housing-for-resistor"
  +title: "Housing for resistor?"
  +url: null
  +body: """
    I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
    \n
    I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
    """
  +type: "article"
  +lang: "en"
  +isOc: false
  +hasEmbed: false
  +commentCount: 8
  +favouriteCount: 5
  +score: 0
  +isAdult: false
  +sticky: false
  +lastActive: DateTime @1697273222 {#2418
    date: 2023-10-14 10:47:02.0 +02:00
  }
  +ip: null
  +adaAmount: 0
  +tags: null
  +mentions: null
  +comments: Doctrine\ORM\PersistentCollection {#1688 …}
  +votes: Doctrine\ORM\PersistentCollection {#1966 …}
  +reports: Doctrine\ORM\PersistentCollection {#1965 …}
  +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
  +badges: Doctrine\ORM\PersistentCollection {#2439 …}
  +children: []
  -id: 2581
  -titleTs: "'hous':1 'resistor':3"
  -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
  +cross: false
  +upVotes: 0
  +downVotes: 0
  +ranking: 1696440665
  +visibility: "visible             "
  +apId: "https://lemmy.world/post/6263071"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696389665 {#1858
    date: 2023-10-04 05:21:05.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\Entry {#2412
  +user: Proxies\__CG__\App\Entity\User {#1978 …}
  +magazine: App\Entity\Magazine {#264
    +icon: Proxies\__CG__\App\Entity\Image {#245 …}
    +name: "askelectronics@discuss.tchncs.de"
    +title: "askelectronics"
    +description: """
      **For questions about component-level electronic circuits, tools and equipment.**\n
      \n
      Rules\n
      -----\n
      \n
      1: Be nice.\n
      \n
      2: Be on-topic (eg: *Electronic*, not *electrical*).\n
      \n
      3: No commercial stuff, buying, selling or valuations.\n
      \n
      4: Be safe.\n
      \n
      ---
      """
    +rules: null
    +subscriptionsCount: 1
    +entryCount: 154
    +entryCommentCount: 1230
    +postCount: 1
    +postCommentCount: 4
    +isAdult: false
    +customCss: null
    +lastActive: DateTime @1729413608 {#274
      date: 2024-10-20 10:40:08.0 +02:00
    }
    +markedForDeletionAt: null
    +tags: null
    +moderators: Doctrine\ORM\PersistentCollection {#236 …}
    +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
    +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
    +entries: Doctrine\ORM\PersistentCollection {#179 …}
    +posts: Doctrine\ORM\PersistentCollection {#137 …}
    +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
    +bans: Doctrine\ORM\PersistentCollection {#116 …}
    +reports: Doctrine\ORM\PersistentCollection {#102 …}
    +badges: Doctrine\ORM\PersistentCollection {#80 …}
    +logs: Doctrine\ORM\PersistentCollection {#70 …}
    +awards: Doctrine\ORM\PersistentCollection {#1360 …}
    +categories: Doctrine\ORM\PersistentCollection {#1792 …}
    -id: 11
    +apId: "askelectronics@discuss.tchncs.de"
    +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
    +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
    +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
    +apInboxUrl: "https://discuss.tchncs.de/inbox"
    +apDomain: "discuss.tchncs.de"
    +apPreferredUsername: "askelectronics"
    +apDiscoverable: true
    +apManuallyApprovesFollowers: null
    +privateKey: null
    +publicKey: null
    +apFetchedAt: DateTime @1727247714 {#268
      date: 2024-09-25 09:01:54.0 +02:00
    }
    +apDeletedAt: null
    +apTimeoutAt: null
    +visibility: "visible             "
    +createdAt: DateTimeImmutable @1687144409 {#270
      date: 2023-06-19 05:13:29.0 +02:00
    }
  }
  +image: null
  +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
  +slug: "Housing-for-resistor"
  +title: "Housing for resistor?"
  +url: null
  +body: """
    I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
    \n
    I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
    """
  +type: "article"
  +lang: "en"
  +isOc: false
  +hasEmbed: false
  +commentCount: 8
  +favouriteCount: 5
  +score: 0
  +isAdult: false
  +sticky: false
  +lastActive: DateTime @1697273222 {#2418
    date: 2023-10-14 10:47:02.0 +02:00
  }
  +ip: null
  +adaAmount: 0
  +tags: null
  +mentions: null
  +comments: Doctrine\ORM\PersistentCollection {#1688 …}
  +votes: Doctrine\ORM\PersistentCollection {#1966 …}
  +reports: Doctrine\ORM\PersistentCollection {#1965 …}
  +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
  +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
  +badges: Doctrine\ORM\PersistentCollection {#2439 …}
  +children: []
  -id: 2581
  -titleTs: "'hous':1 'resistor':3"
  -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
  +cross: false
  +upVotes: 0
  +downVotes: 0
  +ranking: 1696440665
  +visibility: "visible             "
  +apId: "https://lemmy.world/post/6263071"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696389665 {#1858
    date: 2023-10-04 05:21:05.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
null
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4021
  +user: App\Entity\User {#3969 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: null
  +root: null
  +body: """
    I would make sure the solder connection between wire and resistor is very solid, and then encase the stuff in heat shrink tubing with glue in it. (Adhesive Lined Heat Shrink Tubing)\n
    \n
    If it’s good enough for Nasa, it will work for your car: [makezine.com/…/how-to-splice-wire-to-nasa-standar…](https://makezine.com/article/technology/computers-mobile/how-to-splice-wire-to-nasa-standards/)
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1697273222 {#4030
    date: 2023-10-14 10:47:02.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4019 …}
  +nested: Doctrine\ORM\PersistentCollection {#4017 …}
  +votes: Doctrine\ORM\PersistentCollection {#4015 …}
  +reports: Doctrine\ORM\PersistentCollection {#4013 …}
  +favourites: Doctrine\ORM\PersistentCollection {#3981 …}
  +notifications: Doctrine\ORM\PersistentCollection {#3985 …}
  -id: 48123
  -bodyTs: "'/article/technology/computers-mobile/how-to-splice-wire-to-nasa-standards/)':50 '/how-to-splice-wire-to-nasa-standar':47 'adhes':28 'car':45 'connect':7 'encas':17 'enough':37 'glue':25 'good':36 'heat':21,30 'line':29 'make':3 'makezine.com':46,49 'makezine.com/article/technology/computers-mobile/how-to-splice-wire-to-nasa-standards/)':48 'nasa':39 'resistor':11 'shrink':22,31 'solder':6 'solid':14 'stuff':19 'sure':4 'tube':23,32 'wire':9 'work':42 'would':2"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4521080"
  +editedAt: null
  +createdAt: DateTimeImmutable @1697273222 {#3966
    date: 2023-10-14 10:47:02.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4021
  +user: App\Entity\User {#3969 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: null
  +root: null
  +body: """
    I would make sure the solder connection between wire and resistor is very solid, and then encase the stuff in heat shrink tubing with glue in it. (Adhesive Lined Heat Shrink Tubing)\n
    \n
    If it’s good enough for Nasa, it will work for your car: [makezine.com/…/how-to-splice-wire-to-nasa-standar…](https://makezine.com/article/technology/computers-mobile/how-to-splice-wire-to-nasa-standards/)
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1697273222 {#4030
    date: 2023-10-14 10:47:02.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4019 …}
  +nested: Doctrine\ORM\PersistentCollection {#4017 …}
  +votes: Doctrine\ORM\PersistentCollection {#4015 …}
  +reports: Doctrine\ORM\PersistentCollection {#4013 …}
  +favourites: Doctrine\ORM\PersistentCollection {#3981 …}
  +notifications: Doctrine\ORM\PersistentCollection {#3985 …}
  -id: 48123
  -bodyTs: "'/article/technology/computers-mobile/how-to-splice-wire-to-nasa-standards/)':50 '/how-to-splice-wire-to-nasa-standar':47 'adhes':28 'car':45 'connect':7 'encas':17 'enough':37 'glue':25 'good':36 'heat':21,30 'line':29 'make':3 'makezine.com':46,49 'makezine.com/article/technology/computers-mobile/how-to-splice-wire-to-nasa-standards/)':48 'nasa':39 'resistor':11 'shrink':22,31 'solder':6 'solid':14 'stuff':19 'sure':4 'tube':23,32 'wire':9 'work':42 'would':2"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4521080"
  +editedAt: null
  +createdAt: DateTimeImmutable @1697273222 {#3966
    date: 2023-10-14 10:47:02.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4021
  +user: App\Entity\User {#3969 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: null
  +root: null
  +body: """
    I would make sure the solder connection between wire and resistor is very solid, and then encase the stuff in heat shrink tubing with glue in it. (Adhesive Lined Heat Shrink Tubing)\n
    \n
    If it’s good enough for Nasa, it will work for your car: [makezine.com/…/how-to-splice-wire-to-nasa-standar…](https://makezine.com/article/technology/computers-mobile/how-to-splice-wire-to-nasa-standards/)
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1697273222 {#4030
    date: 2023-10-14 10:47:02.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4019 …}
  +nested: Doctrine\ORM\PersistentCollection {#4017 …}
  +votes: Doctrine\ORM\PersistentCollection {#4015 …}
  +reports: Doctrine\ORM\PersistentCollection {#4013 …}
  +favourites: Doctrine\ORM\PersistentCollection {#3981 …}
  +notifications: Doctrine\ORM\PersistentCollection {#3985 …}
  -id: 48123
  -bodyTs: "'/article/technology/computers-mobile/how-to-splice-wire-to-nasa-standards/)':50 '/how-to-splice-wire-to-nasa-standar':47 'adhes':28 'car':45 'connect':7 'encas':17 'enough':37 'glue':25 'good':36 'heat':21,30 'line':29 'make':3 'makezine.com':46,49 'makezine.com/article/technology/computers-mobile/how-to-splice-wire-to-nasa-standards/)':48 'nasa':39 'resistor':11 'shrink':22,31 'solder':6 'solid':14 'stuff':19 'sure':4 'tube':23,32 'wire':9 'work':42 'would':2"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4521080"
  +editedAt: null
  +createdAt: DateTimeImmutable @1697273222 {#3966
    date: 2023-10-14 10:47:02.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
null
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4053
  +user: App\Entity\User {#4042 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: null
  +root: null
  +body: """
    You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
    I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696393522 {#4059
    date: 2023-10-04 06:25:22.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4058 …}
  +nested: Doctrine\ORM\PersistentCollection {#4057 …}
  +votes: Doctrine\ORM\PersistentCollection {#4048 …}
  +reports: Doctrine\ORM\PersistentCollection {#4051 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4046 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4044 …}
  -id: 30804
  -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/3541321"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696390680 {#4064
    date: 2023-10-04 05:38:00.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4053
  +user: App\Entity\User {#4042 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: null
  +root: null
  +body: """
    You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
    I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696393522 {#4059
    date: 2023-10-04 06:25:22.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4058 …}
  +nested: Doctrine\ORM\PersistentCollection {#4057 …}
  +votes: Doctrine\ORM\PersistentCollection {#4048 …}
  +reports: Doctrine\ORM\PersistentCollection {#4051 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4046 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4044 …}
  -id: 30804
  -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/3541321"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696390680 {#4064
    date: 2023-10-04 05:38:00.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4053
  +user: App\Entity\User {#4042 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: null
  +root: null
  +body: """
    You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
    I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696393522 {#4059
    date: 2023-10-04 06:25:22.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4058 …}
  +nested: Doctrine\ORM\PersistentCollection {#4057 …}
  +votes: Doctrine\ORM\PersistentCollection {#4048 …}
  +reports: Doctrine\ORM\PersistentCollection {#4051 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4046 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4044 …}
  -id: 30804
  -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/3541321"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696390680 {#4064
    date: 2023-10-04 05:38:00.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
null
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4293
  +user: Proxies\__CG__\App\Entity\User {#4296 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: App\Entity\EntryComment {#4053
    +user: App\Entity\User {#4042 …}
    +entry: App\Entity\Entry {#2412}
    +magazine: App\Entity\Magazine {#264}
    +image: null
    +parent: null
    +root: null
    +body: """
      You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
      I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
      """
    +lang: "en"
    +isAdult: false
    +favouriteCount: 1
    +score: 0
    +lastActive: DateTime @1696393522 {#4059
      date: 2023-10-04 06:25:22.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4058 …}
    +nested: Doctrine\ORM\PersistentCollection {#4057 …}
    +votes: Doctrine\ORM\PersistentCollection {#4048 …}
    +reports: Doctrine\ORM\PersistentCollection {#4051 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4046 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4044 …}
    -id: 30804
    -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/comment/3541321"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696390680 {#4064
      date: 2023-10-04 05:38:00.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4053}
  +body: """
    Adding on to this line of thinking, maybe a thin plastic tube and epoxy to encase it with the solder joints. (Bonus points for using thermal epoxy, since it is a resistor after all.)\n
    \n
    I have seen Bigclive on YouTube encase resistors and a diode rectifier in standard epoxy for use in lighting, so heat probably won’t be an issue now that I think of it.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696392230 {#4292
    date: 2023-10-04 06:03:50.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@cmnybo@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4300 …}
  +nested: Doctrine\ORM\PersistentCollection {#4302 …}
  +votes: Doctrine\ORM\PersistentCollection {#4298 …}
  +reports: Doctrine\ORM\PersistentCollection {#4304 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4306 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4308 …}
  -id: 30812
  -bodyTs: "'ad':1 'bigcliv':38 'bonus':22 'diod':45 'encas':16,41 'epoxi':14,27,49 'heat':55 'issu':61 'joint':21 'light':53 'line':5 'mayb':8 'plastic':11 'point':23 'probabl':56 'rectifi':46 'resistor':32,42 'seen':37 'sinc':28 'solder':20 'standard':48 'thermal':26 'thin':10 'think':7,65 'tube':12 'use':25,51 'won':57 'youtub':40"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.ca/comment/3638132"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392230 {#4289
    date: 2023-10-04 06:03:50.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4293
  +user: Proxies\__CG__\App\Entity\User {#4296 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: App\Entity\EntryComment {#4053
    +user: App\Entity\User {#4042 …}
    +entry: App\Entity\Entry {#2412}
    +magazine: App\Entity\Magazine {#264}
    +image: null
    +parent: null
    +root: null
    +body: """
      You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
      I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
      """
    +lang: "en"
    +isAdult: false
    +favouriteCount: 1
    +score: 0
    +lastActive: DateTime @1696393522 {#4059
      date: 2023-10-04 06:25:22.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4058 …}
    +nested: Doctrine\ORM\PersistentCollection {#4057 …}
    +votes: Doctrine\ORM\PersistentCollection {#4048 …}
    +reports: Doctrine\ORM\PersistentCollection {#4051 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4046 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4044 …}
    -id: 30804
    -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/comment/3541321"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696390680 {#4064
      date: 2023-10-04 05:38:00.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4053}
  +body: """
    Adding on to this line of thinking, maybe a thin plastic tube and epoxy to encase it with the solder joints. (Bonus points for using thermal epoxy, since it is a resistor after all.)\n
    \n
    I have seen Bigclive on YouTube encase resistors and a diode rectifier in standard epoxy for use in lighting, so heat probably won’t be an issue now that I think of it.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696392230 {#4292
    date: 2023-10-04 06:03:50.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@cmnybo@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4300 …}
  +nested: Doctrine\ORM\PersistentCollection {#4302 …}
  +votes: Doctrine\ORM\PersistentCollection {#4298 …}
  +reports: Doctrine\ORM\PersistentCollection {#4304 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4306 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4308 …}
  -id: 30812
  -bodyTs: "'ad':1 'bigcliv':38 'bonus':22 'diod':45 'encas':16,41 'epoxi':14,27,49 'heat':55 'issu':61 'joint':21 'light':53 'line':5 'mayb':8 'plastic':11 'point':23 'probabl':56 'rectifi':46 'resistor':32,42 'seen':37 'sinc':28 'solder':20 'standard':48 'thermal':26 'thin':10 'think':7,65 'tube':12 'use':25,51 'won':57 'youtub':40"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.ca/comment/3638132"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392230 {#4289
    date: 2023-10-04 06:03:50.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4293
  +user: Proxies\__CG__\App\Entity\User {#4296 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: App\Entity\EntryComment {#4053
    +user: App\Entity\User {#4042 …}
    +entry: App\Entity\Entry {#2412}
    +magazine: App\Entity\Magazine {#264}
    +image: null
    +parent: null
    +root: null
    +body: """
      You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
      I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
      """
    +lang: "en"
    +isAdult: false
    +favouriteCount: 1
    +score: 0
    +lastActive: DateTime @1696393522 {#4059
      date: 2023-10-04 06:25:22.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4058 …}
    +nested: Doctrine\ORM\PersistentCollection {#4057 …}
    +votes: Doctrine\ORM\PersistentCollection {#4048 …}
    +reports: Doctrine\ORM\PersistentCollection {#4051 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4046 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4044 …}
    -id: 30804
    -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/comment/3541321"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696390680 {#4064
      date: 2023-10-04 05:38:00.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4053}
  +body: """
    Adding on to this line of thinking, maybe a thin plastic tube and epoxy to encase it with the solder joints. (Bonus points for using thermal epoxy, since it is a resistor after all.)\n
    \n
    I have seen Bigclive on YouTube encase resistors and a diode rectifier in standard epoxy for use in lighting, so heat probably won’t be an issue now that I think of it.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696392230 {#4292
    date: 2023-10-04 06:03:50.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@cmnybo@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4300 …}
  +nested: Doctrine\ORM\PersistentCollection {#4302 …}
  +votes: Doctrine\ORM\PersistentCollection {#4298 …}
  +reports: Doctrine\ORM\PersistentCollection {#4304 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4306 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4308 …}
  -id: 30812
  -bodyTs: "'ad':1 'bigcliv':38 'bonus':22 'diod':45 'encas':16,41 'epoxi':14,27,49 'heat':55 'issu':61 'joint':21 'light':53 'line':5 'mayb':8 'plastic':11 'point':23 'probabl':56 'rectifi':46 'resistor':32,42 'seen':37 'sinc':28 'solder':20 'standard':48 'thermal':26 'thin':10 'think':7,65 'tube':12 'use':25,51 'won':57 'youtub':40"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.ca/comment/3638132"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392230 {#4289
    date: 2023-10-04 06:03:50.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
null
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4326
  +user: Proxies\__CG__\App\Entity\User {#1978 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: App\Entity\EntryComment {#4293
    +user: Proxies\__CG__\App\Entity\User {#4296 …}
    +entry: App\Entity\Entry {#2412}
    +magazine: App\Entity\Magazine {#264}
    +image: null
    +parent: App\Entity\EntryComment {#4053
      +user: App\Entity\User {#4042 …}
      +entry: App\Entity\Entry {#2412}
      +magazine: App\Entity\Magazine {#264}
      +image: null
      +parent: null
      +root: null
      +body: """
        You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
        I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
        """
      +lang: "en"
      +isAdult: false
      +favouriteCount: 1
      +score: 0
      +lastActive: DateTime @1696393522 {#4059
        date: 2023-10-04 06:25:22.0 +02:00
      }
      +ip: null
      +tags: null
      +mentions: [
        "@thisisawayoflife@lemmy.world"
      ]
      +children: Doctrine\ORM\PersistentCollection {#4058 …}
      +nested: Doctrine\ORM\PersistentCollection {#4057 …}
      +votes: Doctrine\ORM\PersistentCollection {#4048 …}
      +reports: Doctrine\ORM\PersistentCollection {#4051 …}
      +favourites: Doctrine\ORM\PersistentCollection {#4046 …}
      +notifications: Doctrine\ORM\PersistentCollection {#4044 …}
      -id: 30804
      -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
      +ranking: 0
      +commentCount: 0
      +upVotes: 0
      +downVotes: 0
      +visibility: "visible             "
      +apId: "https://discuss.tchncs.de/comment/3541321"
      +editedAt: null
      +createdAt: DateTimeImmutable @1696390680 {#4064
        date: 2023-10-04 05:38:00.0 +02:00
      }
    }
    +root: App\Entity\EntryComment {#4053}
    +body: """
      Adding on to this line of thinking, maybe a thin plastic tube and epoxy to encase it with the solder joints. (Bonus points for using thermal epoxy, since it is a resistor after all.)\n
      \n
      I have seen Bigclive on YouTube encase resistors and a diode rectifier in standard epoxy for use in lighting, so heat probably won’t be an issue now that I think of it.
      """
    +lang: "en"
    +isAdult: false
    +favouriteCount: 1
    +score: 0
    +lastActive: DateTime @1696392230 {#4292
      date: 2023-10-04 06:03:50.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
      "@cmnybo@discuss.tchncs.de"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4300 …}
    +nested: Doctrine\ORM\PersistentCollection {#4302 …}
    +votes: Doctrine\ORM\PersistentCollection {#4298 …}
    +reports: Doctrine\ORM\PersistentCollection {#4304 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4306 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4308 …}
    -id: 30812
    -bodyTs: "'ad':1 'bigcliv':38 'bonus':22 'diod':45 'encas':16,41 'epoxi':14,27,49 'heat':55 'issu':61 'joint':21 'light':53 'line':5 'mayb':8 'plastic':11 'point':23 'probabl':56 'rectifi':46 'resistor':32,42 'seen':37 'sinc':28 'solder':20 'standard':48 'thermal':26 'thin':10 'think':7,65 'tube':12 'use':25,51 'won':57 'youtub':40"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://lemmy.ca/comment/3638132"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696392230 {#4289
      date: 2023-10-04 06:03:50.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4053}
  +body: "This is intriguing and I’m going to think about this."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696392968 {#4331
    date: 2023-10-04 06:16:08.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@cmnybo@discuss.tchncs.de"
    "@remotelove@lemmy.ca"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4334 …}
  +nested: Doctrine\ORM\PersistentCollection {#4338 …}
  +votes: Doctrine\ORM\PersistentCollection {#4340 …}
  +reports: Doctrine\ORM\PersistentCollection {#4341 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4343 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4345 …}
  -id: 30816
  -bodyTs: "'go':7 'intrigu':3 'm':6 'think':9"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4113722"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392968 {#4328
    date: 2023-10-04 06:16:08.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4326
  +user: Proxies\__CG__\App\Entity\User {#1978 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: App\Entity\EntryComment {#4293
    +user: Proxies\__CG__\App\Entity\User {#4296 …}
    +entry: App\Entity\Entry {#2412}
    +magazine: App\Entity\Magazine {#264}
    +image: null
    +parent: App\Entity\EntryComment {#4053
      +user: App\Entity\User {#4042 …}
      +entry: App\Entity\Entry {#2412}
      +magazine: App\Entity\Magazine {#264}
      +image: null
      +parent: null
      +root: null
      +body: """
        You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
        I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
        """
      +lang: "en"
      +isAdult: false
      +favouriteCount: 1
      +score: 0
      +lastActive: DateTime @1696393522 {#4059
        date: 2023-10-04 06:25:22.0 +02:00
      }
      +ip: null
      +tags: null
      +mentions: [
        "@thisisawayoflife@lemmy.world"
      ]
      +children: Doctrine\ORM\PersistentCollection {#4058 …}
      +nested: Doctrine\ORM\PersistentCollection {#4057 …}
      +votes: Doctrine\ORM\PersistentCollection {#4048 …}
      +reports: Doctrine\ORM\PersistentCollection {#4051 …}
      +favourites: Doctrine\ORM\PersistentCollection {#4046 …}
      +notifications: Doctrine\ORM\PersistentCollection {#4044 …}
      -id: 30804
      -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
      +ranking: 0
      +commentCount: 0
      +upVotes: 0
      +downVotes: 0
      +visibility: "visible             "
      +apId: "https://discuss.tchncs.de/comment/3541321"
      +editedAt: null
      +createdAt: DateTimeImmutable @1696390680 {#4064
        date: 2023-10-04 05:38:00.0 +02:00
      }
    }
    +root: App\Entity\EntryComment {#4053}
    +body: """
      Adding on to this line of thinking, maybe a thin plastic tube and epoxy to encase it with the solder joints. (Bonus points for using thermal epoxy, since it is a resistor after all.)\n
      \n
      I have seen Bigclive on YouTube encase resistors and a diode rectifier in standard epoxy for use in lighting, so heat probably won’t be an issue now that I think of it.
      """
    +lang: "en"
    +isAdult: false
    +favouriteCount: 1
    +score: 0
    +lastActive: DateTime @1696392230 {#4292
      date: 2023-10-04 06:03:50.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
      "@cmnybo@discuss.tchncs.de"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4300 …}
    +nested: Doctrine\ORM\PersistentCollection {#4302 …}
    +votes: Doctrine\ORM\PersistentCollection {#4298 …}
    +reports: Doctrine\ORM\PersistentCollection {#4304 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4306 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4308 …}
    -id: 30812
    -bodyTs: "'ad':1 'bigcliv':38 'bonus':22 'diod':45 'encas':16,41 'epoxi':14,27,49 'heat':55 'issu':61 'joint':21 'light':53 'line':5 'mayb':8 'plastic':11 'point':23 'probabl':56 'rectifi':46 'resistor':32,42 'seen':37 'sinc':28 'solder':20 'standard':48 'thermal':26 'thin':10 'think':7,65 'tube':12 'use':25,51 'won':57 'youtub':40"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://lemmy.ca/comment/3638132"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696392230 {#4289
      date: 2023-10-04 06:03:50.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4053}
  +body: "This is intriguing and I’m going to think about this."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696392968 {#4331
    date: 2023-10-04 06:16:08.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@cmnybo@discuss.tchncs.de"
    "@remotelove@lemmy.ca"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4334 …}
  +nested: Doctrine\ORM\PersistentCollection {#4338 …}
  +votes: Doctrine\ORM\PersistentCollection {#4340 …}
  +reports: Doctrine\ORM\PersistentCollection {#4341 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4343 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4345 …}
  -id: 30816
  -bodyTs: "'go':7 'intrigu':3 'm':6 'think':9"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4113722"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392968 {#4328
    date: 2023-10-04 06:16:08.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4326
  +user: Proxies\__CG__\App\Entity\User {#1978 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: App\Entity\EntryComment {#4293
    +user: Proxies\__CG__\App\Entity\User {#4296 …}
    +entry: App\Entity\Entry {#2412}
    +magazine: App\Entity\Magazine {#264}
    +image: null
    +parent: App\Entity\EntryComment {#4053
      +user: App\Entity\User {#4042 …}
      +entry: App\Entity\Entry {#2412}
      +magazine: App\Entity\Magazine {#264}
      +image: null
      +parent: null
      +root: null
      +body: """
        You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
        I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
        """
      +lang: "en"
      +isAdult: false
      +favouriteCount: 1
      +score: 0
      +lastActive: DateTime @1696393522 {#4059
        date: 2023-10-04 06:25:22.0 +02:00
      }
      +ip: null
      +tags: null
      +mentions: [
        "@thisisawayoflife@lemmy.world"
      ]
      +children: Doctrine\ORM\PersistentCollection {#4058 …}
      +nested: Doctrine\ORM\PersistentCollection {#4057 …}
      +votes: Doctrine\ORM\PersistentCollection {#4048 …}
      +reports: Doctrine\ORM\PersistentCollection {#4051 …}
      +favourites: Doctrine\ORM\PersistentCollection {#4046 …}
      +notifications: Doctrine\ORM\PersistentCollection {#4044 …}
      -id: 30804
      -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
      +ranking: 0
      +commentCount: 0
      +upVotes: 0
      +downVotes: 0
      +visibility: "visible             "
      +apId: "https://discuss.tchncs.de/comment/3541321"
      +editedAt: null
      +createdAt: DateTimeImmutable @1696390680 {#4064
        date: 2023-10-04 05:38:00.0 +02:00
      }
    }
    +root: App\Entity\EntryComment {#4053}
    +body: """
      Adding on to this line of thinking, maybe a thin plastic tube and epoxy to encase it with the solder joints. (Bonus points for using thermal epoxy, since it is a resistor after all.)\n
      \n
      I have seen Bigclive on YouTube encase resistors and a diode rectifier in standard epoxy for use in lighting, so heat probably won’t be an issue now that I think of it.
      """
    +lang: "en"
    +isAdult: false
    +favouriteCount: 1
    +score: 0
    +lastActive: DateTime @1696392230 {#4292
      date: 2023-10-04 06:03:50.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
      "@cmnybo@discuss.tchncs.de"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4300 …}
    +nested: Doctrine\ORM\PersistentCollection {#4302 …}
    +votes: Doctrine\ORM\PersistentCollection {#4298 …}
    +reports: Doctrine\ORM\PersistentCollection {#4304 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4306 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4308 …}
    -id: 30812
    -bodyTs: "'ad':1 'bigcliv':38 'bonus':22 'diod':45 'encas':16,41 'epoxi':14,27,49 'heat':55 'issu':61 'joint':21 'light':53 'line':5 'mayb':8 'plastic':11 'point':23 'probabl':56 'rectifi':46 'resistor':32,42 'seen':37 'sinc':28 'solder':20 'standard':48 'thermal':26 'thin':10 'think':7,65 'tube':12 'use':25,51 'won':57 'youtub':40"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://lemmy.ca/comment/3638132"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696392230 {#4289
      date: 2023-10-04 06:03:50.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4053}
  +body: "This is intriguing and I’m going to think about this."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696392968 {#4331
    date: 2023-10-04 06:16:08.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@cmnybo@discuss.tchncs.de"
    "@remotelove@lemmy.ca"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4334 …}
  +nested: Doctrine\ORM\PersistentCollection {#4338 …}
  +votes: Doctrine\ORM\PersistentCollection {#4340 …}
  +reports: Doctrine\ORM\PersistentCollection {#4341 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4343 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4345 …}
  -id: 30816
  -bodyTs: "'go':7 'intrigu':3 'm':6 'think':9"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4113722"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392968 {#4328
    date: 2023-10-04 06:16:08.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
null
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4362
  +user: Proxies\__CG__\App\Entity\User {#4296 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: App\Entity\EntryComment {#4326
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +entry: App\Entity\Entry {#2412}
    +magazine: App\Entity\Magazine {#264}
    +image: null
    +parent: App\Entity\EntryComment {#4293
      +user: Proxies\__CG__\App\Entity\User {#4296 …}
      +entry: App\Entity\Entry {#2412}
      +magazine: App\Entity\Magazine {#264}
      +image: null
      +parent: App\Entity\EntryComment {#4053
        +user: App\Entity\User {#4042 …}
        +entry: App\Entity\Entry {#2412}
        +magazine: App\Entity\Magazine {#264}
        +image: null
        +parent: null
        +root: null
        +body: """
          You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
          I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
          """
        +lang: "en"
        +isAdult: false
        +favouriteCount: 1
        +score: 0
        +lastActive: DateTime @1696393522 {#4059
          date: 2023-10-04 06:25:22.0 +02:00
        }
        +ip: null
        +tags: null
        +mentions: [
          "@thisisawayoflife@lemmy.world"
        ]
        +children: Doctrine\ORM\PersistentCollection {#4058 …}
        +nested: Doctrine\ORM\PersistentCollection {#4057 …}
        +votes: Doctrine\ORM\PersistentCollection {#4048 …}
        +reports: Doctrine\ORM\PersistentCollection {#4051 …}
        +favourites: Doctrine\ORM\PersistentCollection {#4046 …}
        +notifications: Doctrine\ORM\PersistentCollection {#4044 …}
        -id: 30804
        -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
        +ranking: 0
        +commentCount: 0
        +upVotes: 0
        +downVotes: 0
        +visibility: "visible             "
        +apId: "https://discuss.tchncs.de/comment/3541321"
        +editedAt: null
        +createdAt: DateTimeImmutable @1696390680 {#4064
          date: 2023-10-04 05:38:00.0 +02:00
        }
      }
      +root: App\Entity\EntryComment {#4053}
      +body: """
        Adding on to this line of thinking, maybe a thin plastic tube and epoxy to encase it with the solder joints. (Bonus points for using thermal epoxy, since it is a resistor after all.)\n
        \n
        I have seen Bigclive on YouTube encase resistors and a diode rectifier in standard epoxy for use in lighting, so heat probably won’t be an issue now that I think of it.
        """
      +lang: "en"
      +isAdult: false
      +favouriteCount: 1
      +score: 0
      +lastActive: DateTime @1696392230 {#4292
        date: 2023-10-04 06:03:50.0 +02:00
      }
      +ip: null
      +tags: null
      +mentions: [
        "@thisisawayoflife@lemmy.world"
        "@cmnybo@discuss.tchncs.de"
      ]
      +children: Doctrine\ORM\PersistentCollection {#4300 …}
      +nested: Doctrine\ORM\PersistentCollection {#4302 …}
      +votes: Doctrine\ORM\PersistentCollection {#4298 …}
      +reports: Doctrine\ORM\PersistentCollection {#4304 …}
      +favourites: Doctrine\ORM\PersistentCollection {#4306 …}
      +notifications: Doctrine\ORM\PersistentCollection {#4308 …}
      -id: 30812
      -bodyTs: "'ad':1 'bigcliv':38 'bonus':22 'diod':45 'encas':16,41 'epoxi':14,27,49 'heat':55 'issu':61 'joint':21 'light':53 'line':5 'mayb':8 'plastic':11 'point':23 'probabl':56 'rectifi':46 'resistor':32,42 'seen':37 'sinc':28 'solder':20 'standard':48 'thermal':26 'thin':10 'think':7,65 'tube':12 'use':25,51 'won':57 'youtub':40"
      +ranking: 0
      +commentCount: 0
      +upVotes: 0
      +downVotes: 0
      +visibility: "visible             "
      +apId: "https://lemmy.ca/comment/3638132"
      +editedAt: null
      +createdAt: DateTimeImmutable @1696392230 {#4289
        date: 2023-10-04 06:03:50.0 +02:00
      }
    }
    +root: App\Entity\EntryComment {#4053}
    +body: "This is intriguing and I’m going to think about this."
    +lang: "en"
    +isAdult: false
    +favouriteCount: 1
    +score: 0
    +lastActive: DateTime @1696392968 {#4331
      date: 2023-10-04 06:16:08.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
      "@cmnybo@discuss.tchncs.de"
      "@remotelove@lemmy.ca"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4334 …}
    +nested: Doctrine\ORM\PersistentCollection {#4338 …}
    +votes: Doctrine\ORM\PersistentCollection {#4340 …}
    +reports: Doctrine\ORM\PersistentCollection {#4341 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4343 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4345 …}
    -id: 30816
    -bodyTs: "'go':7 'intrigu':3 'm':6 'think':9"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://lemmy.world/comment/4113722"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696392968 {#4328
      date: 2023-10-04 06:16:08.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4053}
  +body: """
    I tried finding the video, but I cannot.\n
    \n
    It’s the same concept as potting PCBs with black epoxy. Of course, it helps to be aware of heat sensitive components but China never cares about that.\n
    \n
    Google for Epoxyseal 9000, if you want something proper.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696393521 {#4357
    date: 2023-10-04 06:25:21.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@cmnybo@discuss.tchncs.de"
    "@remotelove@lemmy.ca"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4354 …}
  +nested: Doctrine\ORM\PersistentCollection {#4351 …}
  +votes: Doctrine\ORM\PersistentCollection {#4349 …}
  +reports: Doctrine\ORM\PersistentCollection {#4363 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4365 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4367 …}
  -id: 30819
  -bodyTs: "'9000':40 'awar':26 'black':18 'cannot':8 'care':34 'china':32 'compon':30 'concept':13 'cours':21 'epoxi':19 'epoxys':39 'find':3 'googl':37 'heat':28 'help':23 'never':33 'pcbs':16 'pot':15 'proper':45 'sensit':29 'someth':44 'tri':2 'video':5 'want':43"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.ca/comment/3638360"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696393521 {#4360
    date: 2023-10-04 06:25:21.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4362
  +user: Proxies\__CG__\App\Entity\User {#4296 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: App\Entity\EntryComment {#4326
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +entry: App\Entity\Entry {#2412}
    +magazine: App\Entity\Magazine {#264}
    +image: null
    +parent: App\Entity\EntryComment {#4293
      +user: Proxies\__CG__\App\Entity\User {#4296 …}
      +entry: App\Entity\Entry {#2412}
      +magazine: App\Entity\Magazine {#264}
      +image: null
      +parent: App\Entity\EntryComment {#4053
        +user: App\Entity\User {#4042 …}
        +entry: App\Entity\Entry {#2412}
        +magazine: App\Entity\Magazine {#264}
        +image: null
        +parent: null
        +root: null
        +body: """
          You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
          I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
          """
        +lang: "en"
        +isAdult: false
        +favouriteCount: 1
        +score: 0
        +lastActive: DateTime @1696393522 {#4059
          date: 2023-10-04 06:25:22.0 +02:00
        }
        +ip: null
        +tags: null
        +mentions: [
          "@thisisawayoflife@lemmy.world"
        ]
        +children: Doctrine\ORM\PersistentCollection {#4058 …}
        +nested: Doctrine\ORM\PersistentCollection {#4057 …}
        +votes: Doctrine\ORM\PersistentCollection {#4048 …}
        +reports: Doctrine\ORM\PersistentCollection {#4051 …}
        +favourites: Doctrine\ORM\PersistentCollection {#4046 …}
        +notifications: Doctrine\ORM\PersistentCollection {#4044 …}
        -id: 30804
        -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
        +ranking: 0
        +commentCount: 0
        +upVotes: 0
        +downVotes: 0
        +visibility: "visible             "
        +apId: "https://discuss.tchncs.de/comment/3541321"
        +editedAt: null
        +createdAt: DateTimeImmutable @1696390680 {#4064
          date: 2023-10-04 05:38:00.0 +02:00
        }
      }
      +root: App\Entity\EntryComment {#4053}
      +body: """
        Adding on to this line of thinking, maybe a thin plastic tube and epoxy to encase it with the solder joints. (Bonus points for using thermal epoxy, since it is a resistor after all.)\n
        \n
        I have seen Bigclive on YouTube encase resistors and a diode rectifier in standard epoxy for use in lighting, so heat probably won’t be an issue now that I think of it.
        """
      +lang: "en"
      +isAdult: false
      +favouriteCount: 1
      +score: 0
      +lastActive: DateTime @1696392230 {#4292
        date: 2023-10-04 06:03:50.0 +02:00
      }
      +ip: null
      +tags: null
      +mentions: [
        "@thisisawayoflife@lemmy.world"
        "@cmnybo@discuss.tchncs.de"
      ]
      +children: Doctrine\ORM\PersistentCollection {#4300 …}
      +nested: Doctrine\ORM\PersistentCollection {#4302 …}
      +votes: Doctrine\ORM\PersistentCollection {#4298 …}
      +reports: Doctrine\ORM\PersistentCollection {#4304 …}
      +favourites: Doctrine\ORM\PersistentCollection {#4306 …}
      +notifications: Doctrine\ORM\PersistentCollection {#4308 …}
      -id: 30812
      -bodyTs: "'ad':1 'bigcliv':38 'bonus':22 'diod':45 'encas':16,41 'epoxi':14,27,49 'heat':55 'issu':61 'joint':21 'light':53 'line':5 'mayb':8 'plastic':11 'point':23 'probabl':56 'rectifi':46 'resistor':32,42 'seen':37 'sinc':28 'solder':20 'standard':48 'thermal':26 'thin':10 'think':7,65 'tube':12 'use':25,51 'won':57 'youtub':40"
      +ranking: 0
      +commentCount: 0
      +upVotes: 0
      +downVotes: 0
      +visibility: "visible             "
      +apId: "https://lemmy.ca/comment/3638132"
      +editedAt: null
      +createdAt: DateTimeImmutable @1696392230 {#4289
        date: 2023-10-04 06:03:50.0 +02:00
      }
    }
    +root: App\Entity\EntryComment {#4053}
    +body: "This is intriguing and I’m going to think about this."
    +lang: "en"
    +isAdult: false
    +favouriteCount: 1
    +score: 0
    +lastActive: DateTime @1696392968 {#4331
      date: 2023-10-04 06:16:08.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
      "@cmnybo@discuss.tchncs.de"
      "@remotelove@lemmy.ca"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4334 …}
    +nested: Doctrine\ORM\PersistentCollection {#4338 …}
    +votes: Doctrine\ORM\PersistentCollection {#4340 …}
    +reports: Doctrine\ORM\PersistentCollection {#4341 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4343 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4345 …}
    -id: 30816
    -bodyTs: "'go':7 'intrigu':3 'm':6 'think':9"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://lemmy.world/comment/4113722"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696392968 {#4328
      date: 2023-10-04 06:16:08.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4053}
  +body: """
    I tried finding the video, but I cannot.\n
    \n
    It’s the same concept as potting PCBs with black epoxy. Of course, it helps to be aware of heat sensitive components but China never cares about that.\n
    \n
    Google for Epoxyseal 9000, if you want something proper.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696393521 {#4357
    date: 2023-10-04 06:25:21.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@cmnybo@discuss.tchncs.de"
    "@remotelove@lemmy.ca"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4354 …}
  +nested: Doctrine\ORM\PersistentCollection {#4351 …}
  +votes: Doctrine\ORM\PersistentCollection {#4349 …}
  +reports: Doctrine\ORM\PersistentCollection {#4363 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4365 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4367 …}
  -id: 30819
  -bodyTs: "'9000':40 'awar':26 'black':18 'cannot':8 'care':34 'china':32 'compon':30 'concept':13 'cours':21 'epoxi':19 'epoxys':39 'find':3 'googl':37 'heat':28 'help':23 'never':33 'pcbs':16 'pot':15 'proper':45 'sensit':29 'someth':44 'tri':2 'video':5 'want':43"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.ca/comment/3638360"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696393521 {#4360
    date: 2023-10-04 06:25:21.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4362
  +user: Proxies\__CG__\App\Entity\User {#4296 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: App\Entity\EntryComment {#4326
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +entry: App\Entity\Entry {#2412}
    +magazine: App\Entity\Magazine {#264}
    +image: null
    +parent: App\Entity\EntryComment {#4293
      +user: Proxies\__CG__\App\Entity\User {#4296 …}
      +entry: App\Entity\Entry {#2412}
      +magazine: App\Entity\Magazine {#264}
      +image: null
      +parent: App\Entity\EntryComment {#4053
        +user: App\Entity\User {#4042 …}
        +entry: App\Entity\Entry {#2412}
        +magazine: App\Entity\Magazine {#264}
        +image: null
        +parent: null
        +root: null
        +body: """
          You can get small project enclosures to put them in. Some PVC pipe and end caps could also work.  \n
          I would probably just use some good quality, adhesive heat shrink if they are out of the way though.
          """
        +lang: "en"
        +isAdult: false
        +favouriteCount: 1
        +score: 0
        +lastActive: DateTime @1696393522 {#4059
          date: 2023-10-04 06:25:22.0 +02:00
        }
        +ip: null
        +tags: null
        +mentions: [
          "@thisisawayoflife@lemmy.world"
        ]
        +children: Doctrine\ORM\PersistentCollection {#4058 …}
        +nested: Doctrine\ORM\PersistentCollection {#4057 …}
        +votes: Doctrine\ORM\PersistentCollection {#4048 …}
        +reports: Doctrine\ORM\PersistentCollection {#4051 …}
        +favourites: Doctrine\ORM\PersistentCollection {#4046 …}
        +notifications: Doctrine\ORM\PersistentCollection {#4044 …}
        -id: 30804
        -bodyTs: "'adhes':28 'also':18 'cap':16 'could':17 'enclosur':6 'end':15 'get':3 'good':26 'heat':29 'pipe':13 'probabl':22 'project':5 'put':8 'pvc':12 'qualiti':27 'shrink':30 'small':4 'though':38 'use':24 'way':37 'work':19 'would':21"
        +ranking: 0
        +commentCount: 0
        +upVotes: 0
        +downVotes: 0
        +visibility: "visible             "
        +apId: "https://discuss.tchncs.de/comment/3541321"
        +editedAt: null
        +createdAt: DateTimeImmutable @1696390680 {#4064
          date: 2023-10-04 05:38:00.0 +02:00
        }
      }
      +root: App\Entity\EntryComment {#4053}
      +body: """
        Adding on to this line of thinking, maybe a thin plastic tube and epoxy to encase it with the solder joints. (Bonus points for using thermal epoxy, since it is a resistor after all.)\n
        \n
        I have seen Bigclive on YouTube encase resistors and a diode rectifier in standard epoxy for use in lighting, so heat probably won’t be an issue now that I think of it.
        """
      +lang: "en"
      +isAdult: false
      +favouriteCount: 1
      +score: 0
      +lastActive: DateTime @1696392230 {#4292
        date: 2023-10-04 06:03:50.0 +02:00
      }
      +ip: null
      +tags: null
      +mentions: [
        "@thisisawayoflife@lemmy.world"
        "@cmnybo@discuss.tchncs.de"
      ]
      +children: Doctrine\ORM\PersistentCollection {#4300 …}
      +nested: Doctrine\ORM\PersistentCollection {#4302 …}
      +votes: Doctrine\ORM\PersistentCollection {#4298 …}
      +reports: Doctrine\ORM\PersistentCollection {#4304 …}
      +favourites: Doctrine\ORM\PersistentCollection {#4306 …}
      +notifications: Doctrine\ORM\PersistentCollection {#4308 …}
      -id: 30812
      -bodyTs: "'ad':1 'bigcliv':38 'bonus':22 'diod':45 'encas':16,41 'epoxi':14,27,49 'heat':55 'issu':61 'joint':21 'light':53 'line':5 'mayb':8 'plastic':11 'point':23 'probabl':56 'rectifi':46 'resistor':32,42 'seen':37 'sinc':28 'solder':20 'standard':48 'thermal':26 'thin':10 'think':7,65 'tube':12 'use':25,51 'won':57 'youtub':40"
      +ranking: 0
      +commentCount: 0
      +upVotes: 0
      +downVotes: 0
      +visibility: "visible             "
      +apId: "https://lemmy.ca/comment/3638132"
      +editedAt: null
      +createdAt: DateTimeImmutable @1696392230 {#4289
        date: 2023-10-04 06:03:50.0 +02:00
      }
    }
    +root: App\Entity\EntryComment {#4053}
    +body: "This is intriguing and I’m going to think about this."
    +lang: "en"
    +isAdult: false
    +favouriteCount: 1
    +score: 0
    +lastActive: DateTime @1696392968 {#4331
      date: 2023-10-04 06:16:08.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
      "@cmnybo@discuss.tchncs.de"
      "@remotelove@lemmy.ca"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4334 …}
    +nested: Doctrine\ORM\PersistentCollection {#4338 …}
    +votes: Doctrine\ORM\PersistentCollection {#4340 …}
    +reports: Doctrine\ORM\PersistentCollection {#4341 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4343 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4345 …}
    -id: 30816
    -bodyTs: "'go':7 'intrigu':3 'm':6 'think':9"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://lemmy.world/comment/4113722"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696392968 {#4328
      date: 2023-10-04 06:16:08.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4053}
  +body: """
    I tried finding the video, but I cannot.\n
    \n
    It’s the same concept as potting PCBs with black epoxy. Of course, it helps to be aware of heat sensitive components but China never cares about that.\n
    \n
    Google for Epoxyseal 9000, if you want something proper.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 1
  +score: 0
  +lastActive: DateTime @1696393521 {#4357
    date: 2023-10-04 06:25:21.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@cmnybo@discuss.tchncs.de"
    "@remotelove@lemmy.ca"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4354 …}
  +nested: Doctrine\ORM\PersistentCollection {#4351 …}
  +votes: Doctrine\ORM\PersistentCollection {#4349 …}
  +reports: Doctrine\ORM\PersistentCollection {#4363 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4365 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4367 …}
  -id: 30819
  -bodyTs: "'9000':40 'awar':26 'black':18 'cannot':8 'care':34 'china':32 'compon':30 'concept':13 'cours':21 'epoxi':19 'epoxys':39 'find':3 'googl':37 'heat':28 'help':23 'never':33 'pcbs':16 'pot':15 'proper':45 'sensit':29 'someth':44 'tri':2 'video':5 'want':43"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.ca/comment/3638360"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696393521 {#4360
    date: 2023-10-04 06:25:21.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
null
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4138
  +user: App\Entity\User {#4151 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: null
  +root: null
  +body: """
    You can get panel mount resistors. They are usually rated at way higher wattage though.\n
    \n
    I would probably just heat shrink the resistor. Your harness should be reasonably secure anyway.\n
    \n
    I would question why you need a 2.2ohm 1/2w resistor in a harness in the first place though.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 2
  +score: 0
  +lastActive: DateTime @1696392905 {#4133
    date: 2023-10-04 06:15:05.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4139 …}
  +nested: Doctrine\ORM\PersistentCollection {#4141 …}
  +votes: Doctrine\ORM\PersistentCollection {#4143 …}
  +reports: Doctrine\ORM\PersistentCollection {#4145 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4147 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4149 …}
  -id: 30814
  -bodyTs: "'1/2w':40 '2.2':38 'anyway':30 'first':47 'get':3 'har':25,44 'heat':20 'higher':13 'mount':5 'need':36 'ohm':39 'panel':4 'place':48 'probabl':18 'question':33 'rate':10 'reason':28 'resistor':6,23,41 'secur':29 'shrink':21 'though':15,49 'usual':9 'wattag':14 'way':12 'would':17,32"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/3541699"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392413 {#4134
    date: 2023-10-04 06:06:53.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4138
  +user: App\Entity\User {#4151 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: null
  +root: null
  +body: """
    You can get panel mount resistors. They are usually rated at way higher wattage though.\n
    \n
    I would probably just heat shrink the resistor. Your harness should be reasonably secure anyway.\n
    \n
    I would question why you need a 2.2ohm 1/2w resistor in a harness in the first place though.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 2
  +score: 0
  +lastActive: DateTime @1696392905 {#4133
    date: 2023-10-04 06:15:05.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4139 …}
  +nested: Doctrine\ORM\PersistentCollection {#4141 …}
  +votes: Doctrine\ORM\PersistentCollection {#4143 …}
  +reports: Doctrine\ORM\PersistentCollection {#4145 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4147 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4149 …}
  -id: 30814
  -bodyTs: "'1/2w':40 '2.2':38 'anyway':30 'first':47 'get':3 'har':25,44 'heat':20 'higher':13 'mount':5 'need':36 'ohm':39 'panel':4 'place':48 'probabl':18 'question':33 'rate':10 'reason':28 'resistor':6,23,41 'secur':29 'shrink':21 'though':15,49 'usual':9 'wattag':14 'way':12 'would':17,32"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/3541699"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392413 {#4134
    date: 2023-10-04 06:06:53.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4138
  +user: App\Entity\User {#4151 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: null
  +root: null
  +body: """
    You can get panel mount resistors. They are usually rated at way higher wattage though.\n
    \n
    I would probably just heat shrink the resistor. Your harness should be reasonably secure anyway.\n
    \n
    I would question why you need a 2.2ohm 1/2w resistor in a harness in the first place though.
    """
  +lang: "en"
  +isAdult: false
  +favouriteCount: 2
  +score: 0
  +lastActive: DateTime @1696392905 {#4133
    date: 2023-10-04 06:15:05.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4139 …}
  +nested: Doctrine\ORM\PersistentCollection {#4141 …}
  +votes: Doctrine\ORM\PersistentCollection {#4143 …}
  +reports: Doctrine\ORM\PersistentCollection {#4145 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4147 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4149 …}
  -id: 30814
  -bodyTs: "'1/2w':40 '2.2':38 'anyway':30 'first':47 'get':3 'har':25,44 'heat':20 'higher':13 'mount':5 'need':36 'ohm':39 'panel':4 'place':48 'probabl':18 'question':33 'rate':10 'reason':28 'resistor':6,23,41 'secur':29 'shrink':21 'though':15,49 'usual':9 'wattag':14 'way':12 'would':17,32"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://discuss.tchncs.de/comment/3541699"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392413 {#4134
    date: 2023-10-04 06:06:53.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
null
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4312
  +user: Proxies\__CG__\App\Entity\User {#1978 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: App\Entity\EntryComment {#4138
    +user: App\Entity\User {#4151 …}
    +entry: App\Entity\Entry {#2412}
    +magazine: App\Entity\Magazine {#264}
    +image: null
    +parent: null
    +root: null
    +body: """
      You can get panel mount resistors. They are usually rated at way higher wattage though.\n
      \n
      I would probably just heat shrink the resistor. Your harness should be reasonably secure anyway.\n
      \n
      I would question why you need a 2.2ohm 1/2w resistor in a harness in the first place though.
      """
    +lang: "en"
    +isAdult: false
    +favouriteCount: 2
    +score: 0
    +lastActive: DateTime @1696392905 {#4133
      date: 2023-10-04 06:15:05.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4139 …}
    +nested: Doctrine\ORM\PersistentCollection {#4141 …}
    +votes: Doctrine\ORM\PersistentCollection {#4143 …}
    +reports: Doctrine\ORM\PersistentCollection {#4145 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4147 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4149 …}
    -id: 30814
    -bodyTs: "'1/2w':40 '2.2':38 'anyway':30 'first':47 'get':3 'har':25,44 'heat':20 'higher':13 'mount':5 'need':36 'ohm':39 'panel':4 'place':48 'probabl':18 'question':33 'rate':10 'reason':28 'resistor':6,23,41 'secur':29 'shrink':21 'though':15,49 'usual':9 'wattag':14 'way':12 'would':17,32"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/comment/3541699"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696392413 {#4134
      date: 2023-10-04 06:06:53.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4138}
  +body: "To fool the computer into not throwing an airbag light and disabling all the airbags. I have an early 00s car that swings double duty as street car and track car and when I pull the driver’s seat out for a race seat, the airbag light shows up. Then I go through a rigamarole to reset the light once everything is swapped and plugged in again. It’s a common mod, but just people usually cut up the harness. I’d like to keep things neat and tidy so I bought the seat side of the harness and want to cut the plug off, solder on the resistor and plug it in."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 4
  +score: 0
  +lastActive: DateTime @1696392904 {#4310
    date: 2023-10-04 06:15:04.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@benzmacx16v@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4313 …}
  +nested: Doctrine\ORM\PersistentCollection {#4315 …}
  +votes: Doctrine\ORM\PersistentCollection {#4317 …}
  +reports: Doctrine\ORM\PersistentCollection {#4319 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4321 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4323 …}
  -id: 30815
  -bodyTs: "'00s':20 'airbag':9,15,46 'bought':92 'car':21,28,31 'common':71 'comput':4 'cut':77,102 'd':82 'disabl':12 'doubl':24 'driver':37 'duti':25 'earli':19 'everyth':61 'fool':2 'go':52 'har':80,98 'keep':85 'light':10,47,59 'like':83 'mod':72 'neat':87 'peopl':75 'plug':65,104,111 'pull':35 'race':43 'reset':57 'resistor':109 'rigamarol':55 'seat':39,44,94 'show':48 'side':95 'solder':106 'street':27 'swap':63 'swing':23 'thing':86 'throw':7 'tidi':89 'track':30 'usual':76 'want':100"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4113703"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392904 {#4311
    date: 2023-10-04 06:15:04.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4312
  +user: Proxies\__CG__\App\Entity\User {#1978 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: App\Entity\EntryComment {#4138
    +user: App\Entity\User {#4151 …}
    +entry: App\Entity\Entry {#2412}
    +magazine: App\Entity\Magazine {#264}
    +image: null
    +parent: null
    +root: null
    +body: """
      You can get panel mount resistors. They are usually rated at way higher wattage though.\n
      \n
      I would probably just heat shrink the resistor. Your harness should be reasonably secure anyway.\n
      \n
      I would question why you need a 2.2ohm 1/2w resistor in a harness in the first place though.
      """
    +lang: "en"
    +isAdult: false
    +favouriteCount: 2
    +score: 0
    +lastActive: DateTime @1696392905 {#4133
      date: 2023-10-04 06:15:05.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4139 …}
    +nested: Doctrine\ORM\PersistentCollection {#4141 …}
    +votes: Doctrine\ORM\PersistentCollection {#4143 …}
    +reports: Doctrine\ORM\PersistentCollection {#4145 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4147 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4149 …}
    -id: 30814
    -bodyTs: "'1/2w':40 '2.2':38 'anyway':30 'first':47 'get':3 'har':25,44 'heat':20 'higher':13 'mount':5 'need':36 'ohm':39 'panel':4 'place':48 'probabl':18 'question':33 'rate':10 'reason':28 'resistor':6,23,41 'secur':29 'shrink':21 'though':15,49 'usual':9 'wattag':14 'way':12 'would':17,32"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/comment/3541699"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696392413 {#4134
      date: 2023-10-04 06:06:53.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4138}
  +body: "To fool the computer into not throwing an airbag light and disabling all the airbags. I have an early 00s car that swings double duty as street car and track car and when I pull the driver’s seat out for a race seat, the airbag light shows up. Then I go through a rigamarole to reset the light once everything is swapped and plugged in again. It’s a common mod, but just people usually cut up the harness. I’d like to keep things neat and tidy so I bought the seat side of the harness and want to cut the plug off, solder on the resistor and plug it in."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 4
  +score: 0
  +lastActive: DateTime @1696392904 {#4310
    date: 2023-10-04 06:15:04.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@benzmacx16v@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4313 …}
  +nested: Doctrine\ORM\PersistentCollection {#4315 …}
  +votes: Doctrine\ORM\PersistentCollection {#4317 …}
  +reports: Doctrine\ORM\PersistentCollection {#4319 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4321 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4323 …}
  -id: 30815
  -bodyTs: "'00s':20 'airbag':9,15,46 'bought':92 'car':21,28,31 'common':71 'comput':4 'cut':77,102 'd':82 'disabl':12 'doubl':24 'driver':37 'duti':25 'earli':19 'everyth':61 'fool':2 'go':52 'har':80,98 'keep':85 'light':10,47,59 'like':83 'mod':72 'neat':87 'peopl':75 'plug':65,104,111 'pull':35 'race':43 'reset':57 'resistor':109 'rigamarol':55 'seat':39,44,94 'show':48 'side':95 'solder':106 'street':27 'swap':63 'swing':23 'thing':86 'throw':7 'tidi':89 'track':30 'usual':76 'want':100"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4113703"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392904 {#4311
    date: 2023-10-04 06:15:04.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4312
  +user: Proxies\__CG__\App\Entity\User {#1978 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: App\Entity\EntryComment {#4138
    +user: App\Entity\User {#4151 …}
    +entry: App\Entity\Entry {#2412}
    +magazine: App\Entity\Magazine {#264}
    +image: null
    +parent: null
    +root: null
    +body: """
      You can get panel mount resistors. They are usually rated at way higher wattage though.\n
      \n
      I would probably just heat shrink the resistor. Your harness should be reasonably secure anyway.\n
      \n
      I would question why you need a 2.2ohm 1/2w resistor in a harness in the first place though.
      """
    +lang: "en"
    +isAdult: false
    +favouriteCount: 2
    +score: 0
    +lastActive: DateTime @1696392905 {#4133
      date: 2023-10-04 06:15:05.0 +02:00
    }
    +ip: null
    +tags: null
    +mentions: [
      "@thisisawayoflife@lemmy.world"
    ]
    +children: Doctrine\ORM\PersistentCollection {#4139 …}
    +nested: Doctrine\ORM\PersistentCollection {#4141 …}
    +votes: Doctrine\ORM\PersistentCollection {#4143 …}
    +reports: Doctrine\ORM\PersistentCollection {#4145 …}
    +favourites: Doctrine\ORM\PersistentCollection {#4147 …}
    +notifications: Doctrine\ORM\PersistentCollection {#4149 …}
    -id: 30814
    -bodyTs: "'1/2w':40 '2.2':38 'anyway':30 'first':47 'get':3 'har':25,44 'heat':20 'higher':13 'mount':5 'need':36 'ohm':39 'panel':4 'place':48 'probabl':18 'question':33 'rate':10 'reason':28 'resistor':6,23,41 'secur':29 'shrink':21 'though':15,49 'usual':9 'wattag':14 'way':12 'would':17,32"
    +ranking: 0
    +commentCount: 0
    +upVotes: 0
    +downVotes: 0
    +visibility: "visible             "
    +apId: "https://discuss.tchncs.de/comment/3541699"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696392413 {#4134
      date: 2023-10-04 06:06:53.0 +02:00
    }
  }
  +root: App\Entity\EntryComment {#4138}
  +body: "To fool the computer into not throwing an airbag light and disabling all the airbags. I have an early 00s car that swings double duty as street car and track car and when I pull the driver’s seat out for a race seat, the airbag light shows up. Then I go through a rigamarole to reset the light once everything is swapped and plugged in again. It’s a common mod, but just people usually cut up the harness. I’d like to keep things neat and tidy so I bought the seat side of the harness and want to cut the plug off, solder on the resistor and plug it in."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 4
  +score: 0
  +lastActive: DateTime @1696392904 {#4310
    date: 2023-10-04 06:15:04.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
    "@benzmacx16v@discuss.tchncs.de"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4313 …}
  +nested: Doctrine\ORM\PersistentCollection {#4315 …}
  +votes: Doctrine\ORM\PersistentCollection {#4317 …}
  +reports: Doctrine\ORM\PersistentCollection {#4319 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4321 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4323 …}
  -id: 30815
  -bodyTs: "'00s':20 'airbag':9,15,46 'bought':92 'car':21,28,31 'common':71 'comput':4 'cut':77,102 'd':82 'disabl':12 'doubl':24 'driver':37 'duti':25 'earli':19 'everyth':61 'fool':2 'go':52 'har':80,98 'keep':85 'light':10,47,59 'like':83 'mod':72 'neat':87 'peopl':75 'plug':65,104,111 'pull':35 'race':43 'reset':57 'resistor':109 'rigamarol':55 'seat':39,44,94 'show':48 'side':95 'solder':106 'street':27 'swap':63 'swing':23 'thing':86 'throw':7 'tidi':89 'track':30 'usual':76 'want':100"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4113703"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696392904 {#4311
    date: 2023-10-04 06:15:04.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
null
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4211
  +user: App\Entity\User {#4224 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: null
  +root: null
  +body: "Look for a higher quality resistor? There will definitely be something in your range that is made for durability."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 0
  +score: 0
  +lastActive: DateTime @1696391068 {#4206
    date: 2023-10-04 05:44:28.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4212 …}
  +nested: Doctrine\ORM\PersistentCollection {#4214 …}
  +votes: Doctrine\ORM\PersistentCollection {#4216 …}
  +reports: Doctrine\ORM\PersistentCollection {#4218 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4220 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4222 …}
  -id: 30809
  -bodyTs: "'definit':9 'durabl':19 'higher':4 'look':1 'made':17 'qualiti':5 'rang':14 'resistor':6 'someth':11"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4113348"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696391068 {#4207
    date: 2023-10-04 05:44:28.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4211
  +user: App\Entity\User {#4224 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: null
  +root: null
  +body: "Look for a higher quality resistor? There will definitely be something in your range that is made for durability."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 0
  +score: 0
  +lastActive: DateTime @1696391068 {#4206
    date: 2023-10-04 05:44:28.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4212 …}
  +nested: Doctrine\ORM\PersistentCollection {#4214 …}
  +votes: Doctrine\ORM\PersistentCollection {#4216 …}
  +reports: Doctrine\ORM\PersistentCollection {#4218 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4220 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4222 …}
  -id: 30809
  -bodyTs: "'definit':9 'durabl':19 'higher':4 'look':1 'made':17 'qualiti':5 'rang':14 'resistor':6 'someth':11"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4113348"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696391068 {#4207
    date: 2023-10-04 05:44:28.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\EntryComment {#4211
  +user: App\Entity\User {#4224 …}
  +entry: App\Entity\Entry {#2412
    +user: Proxies\__CG__\App\Entity\User {#1978 …}
    +magazine: App\Entity\Magazine {#264
      +icon: Proxies\__CG__\App\Entity\Image {#245 …}
      +name: "askelectronics@discuss.tchncs.de"
      +title: "askelectronics"
      +description: """
        **For questions about component-level electronic circuits, tools and equipment.**\n
        \n
        Rules\n
        -----\n
        \n
        1: Be nice.\n
        \n
        2: Be on-topic (eg: *Electronic*, not *electrical*).\n
        \n
        3: No commercial stuff, buying, selling or valuations.\n
        \n
        4: Be safe.\n
        \n
        ---
        """
      +rules: null
      +subscriptionsCount: 1
      +entryCount: 154
      +entryCommentCount: 1230
      +postCount: 1
      +postCommentCount: 4
      +isAdult: false
      +customCss: null
      +lastActive: DateTime @1729413608 {#274
        date: 2024-10-20 10:40:08.0 +02:00
      }
      +markedForDeletionAt: null
      +tags: null
      +moderators: Doctrine\ORM\PersistentCollection {#236 …}
      +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
      +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
      +entries: Doctrine\ORM\PersistentCollection {#179 …}
      +posts: Doctrine\ORM\PersistentCollection {#137 …}
      +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
      +bans: Doctrine\ORM\PersistentCollection {#116 …}
      +reports: Doctrine\ORM\PersistentCollection {#102 …}
      +badges: Doctrine\ORM\PersistentCollection {#80 …}
      +logs: Doctrine\ORM\PersistentCollection {#70 …}
      +awards: Doctrine\ORM\PersistentCollection {#1360 …}
      +categories: Doctrine\ORM\PersistentCollection {#1792 …}
      -id: 11
      +apId: "askelectronics@discuss.tchncs.de"
      +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
      +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
      +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
      +apInboxUrl: "https://discuss.tchncs.de/inbox"
      +apDomain: "discuss.tchncs.de"
      +apPreferredUsername: "askelectronics"
      +apDiscoverable: true
      +apManuallyApprovesFollowers: null
      +privateKey: null
      +publicKey: null
      +apFetchedAt: DateTime @1727247714 {#268
        date: 2024-09-25 09:01:54.0 +02:00
      }
      +apDeletedAt: null
      +apTimeoutAt: null
      +visibility: "visible             "
      +createdAt: DateTimeImmutable @1687144409 {#270
        date: 2023-06-19 05:13:29.0 +02:00
      }
    }
    +image: null
    +domain: Proxies\__CG__\App\Entity\Domain {#1889 …}
    +slug: "Housing-for-resistor"
    +title: "Housing for resistor?"
    +url: null
    +body: """
      I have some metal film 1/2w 2.2ohm resistors in some car wiring. I’m concerned about the durability of this install and am seeking advice on how to protect the resistor once it’s soldered in place. The obvious is heat shrink tubing, but it’s there anything more substantial?\n
      \n
      I’ll be using these resistors in a custom pigtail that will plug into the car wiring. 3D printed housing? I have tried searching and I haven’t found anything like that.
      """
    +type: "article"
    +lang: "en"
    +isOc: false
    +hasEmbed: false
    +commentCount: 8
    +favouriteCount: 5
    +score: 0
    +isAdult: false
    +sticky: false
    +lastActive: DateTime @1697273222 {#2418
      date: 2023-10-14 10:47:02.0 +02:00
    }
    +ip: null
    +adaAmount: 0
    +tags: null
    +mentions: null
    +comments: Doctrine\ORM\PersistentCollection {#1688 …}
    +votes: Doctrine\ORM\PersistentCollection {#1966 …}
    +reports: Doctrine\ORM\PersistentCollection {#1965 …}
    +favourites: Doctrine\ORM\PersistentCollection {#1368 …}
    +notifications: Doctrine\ORM\PersistentCollection {#2426 …}
    +badges: Doctrine\ORM\PersistentCollection {#2439 …}
    +children: []
    -id: 2581
    -titleTs: "'hous':1 'resistor':3"
    -bodyTs: "'1/2w':6 '2.2':7 '3d':69 'advic':26 'anyth':49,81 'car':12,67 'concern':16 'custom':60 'durabl':19 'film':5 'found':80 'haven':78 'heat':42 'hous':71 'instal':22 'like':82 'll':53 'm':15 'metal':4 'obvious':40 'ohm':8 'pigtail':61 'place':38 'plug':64 'print':70 'protect':30 'resistor':9,32,57 'search':75 'seek':25 'shrink':43 'solder':36 'substanti':51 'tri':74 'tube':44 'use':55 'wire':13,68"
    +cross: false
    +upVotes: 0
    +downVotes: 0
    +ranking: 1696440665
    +visibility: "visible             "
    +apId: "https://lemmy.world/post/6263071"
    +editedAt: null
    +createdAt: DateTimeImmutable @1696389665 {#1858
      date: 2023-10-04 05:21:05.0 +02:00
    }
  }
  +magazine: App\Entity\Magazine {#264}
  +image: null
  +parent: null
  +root: null
  +body: "Look for a higher quality resistor? There will definitely be something in your range that is made for durability."
  +lang: "en"
  +isAdult: false
  +favouriteCount: 0
  +score: 0
  +lastActive: DateTime @1696391068 {#4206
    date: 2023-10-04 05:44:28.0 +02:00
  }
  +ip: null
  +tags: null
  +mentions: [
    "@thisisawayoflife@lemmy.world"
  ]
  +children: Doctrine\ORM\PersistentCollection {#4212 …}
  +nested: Doctrine\ORM\PersistentCollection {#4214 …}
  +votes: Doctrine\ORM\PersistentCollection {#4216 …}
  +reports: Doctrine\ORM\PersistentCollection {#4218 …}
  +favourites: Doctrine\ORM\PersistentCollection {#4220 …}
  +notifications: Doctrine\ORM\PersistentCollection {#4222 …}
  -id: 30809
  -bodyTs: "'definit':9 'durabl':19 'higher':4 'look':1 'made':17 'qualiti':5 'rang':14 'resistor':6 'someth':11"
  +ranking: 0
  +commentCount: 0
  +upVotes: 0
  +downVotes: 0
  +visibility: "visible             "
  +apId: "https://lemmy.world/comment/4113348"
  +editedAt: null
  +createdAt: DateTimeImmutable @1696391068 {#4207
    date: 2023-10-04 05:44:28.0 +02:00
  }
}
"App\Security\Voter\UserVoter"
App\Entity\Magazine {#264
  +icon: Proxies\__CG__\App\Entity\Image {#245 …}
  +name: "askelectronics@discuss.tchncs.de"
  +title: "askelectronics"
  +description: """
    **For questions about component-level electronic circuits, tools and equipment.**\n
    \n
    Rules\n
    -----\n
    \n
    1: Be nice.\n
    \n
    2: Be on-topic (eg: *Electronic*, not *electrical*).\n
    \n
    3: No commercial stuff, buying, selling or valuations.\n
    \n
    4: Be safe.\n
    \n
    ---
    """
  +rules: null
  +subscriptionsCount: 1
  +entryCount: 154
  +entryCommentCount: 1230
  +postCount: 1
  +postCommentCount: 4
  +isAdult: false
  +customCss: null
  +lastActive: DateTime @1729413608 {#274
    date: 2024-10-20 10:40:08.0 +02:00
  }
  +markedForDeletionAt: null
  +tags: null
  +moderators: Doctrine\ORM\PersistentCollection {#236 …}
  +ownershipRequests: Doctrine\ORM\PersistentCollection {#232 …}
  +moderatorRequests: Doctrine\ORM\PersistentCollection {#221 …}
  +entries: Doctrine\ORM\PersistentCollection {#179 …}
  +posts: Doctrine\ORM\PersistentCollection {#137 …}
  +subscriptions: Doctrine\ORM\PersistentCollection {#199 …}
  +bans: Doctrine\ORM\PersistentCollection {#116 …}
  +reports: Doctrine\ORM\PersistentCollection {#102 …}
  +badges: Doctrine\ORM\PersistentCollection {#80 …}
  +logs: Doctrine\ORM\PersistentCollection {#70 …}
  +awards: Doctrine\ORM\PersistentCollection {#1360 …}
  +categories: Doctrine\ORM\PersistentCollection {#1792 …}
  -id: 11
  +apId: "askelectronics@discuss.tchncs.de"
  +apProfileId: "https://discuss.tchncs.de/c/askelectronics"
  +apPublicUrl: "https://discuss.tchncs.de/c/askelectronics"
  +apFollowersUrl: "https://discuss.tchncs.de/c/askelectronics/followers"
  +apInboxUrl: "https://discuss.tchncs.de/inbox"
  +apDomain: "discuss.tchncs.de"
  +apPreferredUsername: "askelectronics"
  +apDiscoverable: true
  +apManuallyApprovesFollowers: null
  +privateKey: null
  +publicKey: null
  +apFetchedAt: DateTime @1727247714 {#268
    date: 2024-09-25 09:01:54.0 +02:00
  }
  +apDeletedAt: null
  +apTimeoutAt: null
  +visibility: "visible             "
  +createdAt: DateTimeImmutable @1687144409 {#270
    date: 2023-06-19 05:13:29.0 +02:00
  }
}
"App\Security\Voter\UserVoter"

Symfony Profiler

GET https://kbin.spritesserver.nl/index.php/m/askelectronics@discuss.tchncs.de/t/2581/Housing-for-resistor/active

Configuration Settings

Theme

Page Width

Security

Token

Firewall

Configuration

Listeners

Authenticators

Access Decision

Access decision log