ratman150

@ratman150@sh.itjust.works

This profile is from a federated server and may be incomplete. Browse more on the original instance.

ratman150,

This shit needs to stop. As a Texan (by force…) I’d absolutely be joining the feds to fight against Texas.

ratman150, (edited )

I’ll freely admit to skimming a bit but yes proxmox can run trunas inside of it. Proxmox is powerful but might be a little frustrating to learn at first. For example by default proxmox expects to use the boot drive for itself and it’s not immediately clear how to change that to use that disk for other things.

The noctua dh-15 is overkill for that cpu btw unless you’re doing an overclock which I wouldn’t recommend for server use. What’s your plans for the 1060? If using proxmox you’ll want to get one of the “G” series AMD CPUs do that proxmox binds to the apu and then you should be able to do gpu passthrough on the 1060.

ratman150,

I have a proxbox with a R5 4600G even under extreme loads the stock cooler is fine. Honestly once prox is setup you don’t need a GPU. The video output of proxmox is just a terminal (Debian) so as long as things are running normally you can do everything through the web interface even without the gpu. I do highly recommend a second GPU (either a G series CPU or a cheap GPU) if you want to try proxmox GPU passthrough. I’ve done it and can say it is extremely difficult to get working reliably with just a single GPU.

ratman150,

Depending on your transcoding needs you might not even need it for that.

ratman150,

Clearly the universe decided you needed to listen to Freebird lol

ratman150,

I’m 20 miles south of Sherman TX and while I didn’t see nearly as much snow/ice as they did I did get a lovely stealth ice that coated my neighborhood. Temps got to 7-8°f I was prepared and we were comfortable. Until today I hadn’t heard of any busted pipes but my office and some other people have been flooded by them now lol.

People panic bought on the weekend which was fun to watch.

ratman150,

I used to think this way as I’ve been able to touch type for a very long time but in total darkness it’s very nice to be able to find a key/orient things.

ratman150,

A small container would probably work best

ratman150,

That had no chance of being a relationship.

ratman150,

Wait till you see the enterprise side where you may find a panel that is virtually identical to something from windows 2000

ratman150,

There’s a channel “learnlinuxtv” on YouTube that is pretty good. I haven’t looked in a while but I watched their entire course on proxmox. They also create books.

ratman150,

Jesus lotta “motorcycles are a deathtrap” in here.

Hi, I’ve been riding for 10 years on all different kinds of machines through many lengths of commute/fun. allow me to be abrupt motorcycles cost more than a Prius to own. The tires don’t last as long, the maintenance is more frequent, obviously the gear you absolutely should be wearing is expensive but hey if none of that bothers you please continue to enjoy riding.

It’s not very active but there’s a motorcycle community here on lemmy, please join us ;)

https://sh.itjust.works/pictrs/image/95f24959-0dc5-4db0-9d47-3dec64fe2faf.jpeg

ratman150,

This is very true, even newer bikes that have more modern emissions are still generally exempt from the same standards as any car.

That being said if you have a high traffic commute it would still be faster for you to use a bike as well as better for everyone else in traffic so pros and cons.

Fortnine has a video that touches on the emissions/trying to be green and riding a motorcycle. The fact is most bikes not made within the last 10 years (and some that are) are carbureted and have little if any emissions control. Sure that Yamaha vstar250 might get 80mpg but that has more to do with having a smaller engine than a lawnmower than it does any modern engineering.

ratman150,
ratman150,

Of course lol

ratman150,

They’re very cool but the problem is aero. To build an ev-bike that’s fast enough to be a motorcycle you run into a lot of drag. Ebikes that still go pretty fast but still technically are a bicycle fit this gap nicely.

Another issue is price though. To do my current commute via electric motorcycle id probably need to buy the HD Live Wire Del Mar, which if I remember correctly is about 17k. Do you know what else was 17k? My electric Fiat 500e which is what I generally use to do my commute. On the other end of the scale is pricing for ebikes which isn’t that bad and does start around the 500-800 but can easily get into the tens of thousands of dollars for some very high end options.

While I see there’s a lot of people here that disagree with me on motorcycles being just fine for commuting, it’s important to recognize that not every task needs a car. Motorcycles are not the cleanest way to get around but they do overall have less impact. Sure you can off-road in a Cadillac Escalade, but how much will that tear the trail up compared to my 450lb klr650? You might be able to fit 6 months groceries in the back but you also need to park in the back to find a spot. Sure you can haul 8 people but how often is it just 1?

Finally, they’re fun AF.

ratman150,

Is that a Tracer 900? I’ve only seen people putting around on those I love your setup.

ratman150,

I actually met someone with a ninja 1000sx and they love that thing. For a while I had a concours 1000 that I adored but that has since turned into an indefinite project bike :(

ratman150,

I’ve lost I think 5 personal friends who rode. You know what each of them had in common? Wreckless driving.

ratman150,

I’ve been on plenty of shiny new full fairing machines and they always remind me of just how easy it is to work on my KLR. I really like that in 15 or so minutes I could probably have the bike down to whatever part I need and probably also fix it without resorting to a shop.

ratman150,

Home assistant is probably your friend with hue.

ratman150,

This mower was originally designed to have AC.

  • All
  • Subscribed
  • Moderated
  • Favorites
  • localhost
  • All magazines
  • Loading…
    Loading the web debug toolbar…
    Attempt #