I put it all under a spoiler tag because it’s a lot. Let me know if you’re interested!
inventory/specs# UPS Eaton 5SC 1000 full sine-wave inverter # Rack 13U enclosed rack w/casters and magnetic front door # Networking ## TP-Link EAP225 Wifi AP ## Aruba Networks S2500-24P-US Switch - 24 Port Gigabit Switch - PoE - 4x SFP+ 10Gbit ports # Servers ## Dell R720xd ### Components - 2x Intel Xeon E5-2667 v2 @ 3.3GHz (8-core CPUs) - 14x 8GB Samsung ECC 2Rx4 Dual Rank DDR3 10600R 1333MHz RAM (112 GB) - Intel 4P X520 NIC (2x SFP+ 10Gbit, 2x 1Gbit) - 2x 750W PSU - IDSDM 6YFN5 dual SD module - 2x Sandisk 16GB UHS-1 Extreme SDHC SD cards - PERC H710P Mini Host Bus Adapter - PERC H310 Host Bus Adapter - Dual 2.5" Hotswap Drive Backplane 0JDG3 - 2x Crucial MX500 500GB SSD - 2x 2.5" Dell Hotswap Drive Caddies/Trays - Front Hotswap HDD Backplane - 12x HGST Ultrastar KP06 6TB 7200RPM HDDs - 12x 3.5" Dell Hotswap Drive Caddies/Trays - Rack Rails (They hold the server in place, but they’re missing some bearings. If the server is pulled out on the rails it may not go back. Replacing these should be less than $50) - Locking front panel - iDRAC Module ### Notes - Runs ~235W at idle - Can handle many VMs and multiple simultaneous 4k Plex transcodes - This is basically the best set of parts for the xx20 series Dell servers and is more capable than a lot of the xx30 units ## Dell R710 ### Components - Rack Rails - Locking front panel - CD Drive to 2.5" Drive Adapter - Samsung 860 Evo 250GB SSD - Front Hotswap HDD Backplane - 6x 3.5" Dell Hotswap Drive Caddies/Trays - 2x 870W PSU - PERC H216 Host Bus Adapter - 2x Intel Xeon L5640 @2.26GHz (6-core CPUs) - 18x 4GB Samsung ECC 2Rx8 Dual Rank DDR3 10600R 1333MHz RAM (72GB) - Dell 0KJYDB 2xSFP+ 10Gbit NIC ### Notes - Set up to be an ideal backup server - Just add hard drives and it will be ready to go - iDRAC modules are available on eBay if you would like out of band management