filister,

You need to have a dedicated WAN interface, where you connect your WAN cable. The rest of the ports must be put into bridge mode.

You need to create VLANs, one for the WAN, then your home network, eventually your IoT network, guest network, etc. and expose those VLANs to the respective bridge ports.

You would also need an AP that supports VLANs, so anything that runs OpenWRT or other supported device. The routing would be done on the OPNSense’s side.

On the Proxmox you need to expose the network ports to the VM running OPNSense.

But there are more steps involved and if someone can share a step-by-step guide explaining the whole process would be better.

  • All
  • Subscribed
  • Moderated
  • Favorites
  • selfhosted@lemmy.world
  • localhost
  • All magazines
  • Loading…
    Loading the web debug toolbar…
    Attempt #