I watched several sewing videos in preparation to buy a machine. The consensus is that drop-in bobbins are easier for beginners than front-load. Well I’m the kind of person who wants to get to the /expert/ stage & if that means doing things the hard way, so be it. But then the question is, what are the advantages of...
I haven’t come across any significant discussion surrounding this before and I wouldn’t recommend choosing a machine on this basis.
A front-loading bobbin is only an advantage for changing mid-task if you catch it before the thread runs out, otherwise you’ll be backtracking and starting again anyway once you’ve replaced it. I suppose if there is a viewing window and you can see when it is about to run out then this is an advantage, otherwise you won’t know when to stop and change it anyway until you notice that it has already run out.
In terms of speed I doubt you will find any typical sewing machine “too slow” unless you plan to sew a lot and you want it finished quickly. For a few repairs or alterations and the occasional custom piece speed is not a priority, most of the time you will want to go slower anyway for more control/accuracy.
I think you need to put less thought into what machine you get and more thought into getting some machine and start sewing without thinking so much about details like how the bobbin is loaded. As a beginner these things don’t matter, and by the time you are non-beginner enough for them to matter then you will know what aspects are important to you and if you want to upgrade. As it is, you can’t really jump to making “expert-level” choices because you don’t have the experience to know, for example, if speed is even a priority to you.
That machine is a pretty solid choice if it works, and a worthwhile repair project if it doesn’t (it may have seized up if not maintained recently or it may have timing or alignment issues from age).
Machines like that are quite solidly built compared to modern machines, I would be surprised if it can’t get through a few layers of denim for a few stitches (I wouldn’t recommend doing 6 layers continuously, but crossing over the side seam should be OK). If you’re concerned you can always hand crank it for that part.
The lack of a free arm may be somewhat limiting for hems. The “stupid” solution would be to stand the machine up on top of a crate or similar, as long as the circumference of the leg/other fabric is large enough to fit around the bottom metal “plate” of the machine. (These machines have a metal body designed to be built into a cabinet or shelf top. I’m not sure if yours includes a wooden box around the bottom or if it is just the machine itself, but if there is any wood then the machine can be removed from this leaving just the metal body of the machine itself which may provide more flexibility in this regard.)
[answered] Front-load bobbins -- any advantages? Or only downsides?
I watched several sewing videos in preparation to buy a machine. The consensus is that drop-in bobbins are easier for beginners than front-load. Well I’m the kind of person who wants to get to the /expert/ stage & if that means doing things the hard way, so be it. But then the question is, what are the advantages of...