The devs just said fuckit afterwards, as you do when you get a lawsuit saying your about to be so far in debt because of your side project that your whole life will be turned up side down.
you have to have a client that can play the content
output via a HDMI splitter
record the screen from the second computer
you now have a 4k recording
That constitutes a webrip.
A webdl means you need to crack widevine or whatever protections Netflix has in place.
How you crack that means you most likely need a L1 key which is the highest protection and no one is going to tell you how to get one or crack it. If they do they risk making their way & key public and then it will be patched and “everyone” will be worse off.
Size wise if you are already taking the hit for time, you are now better off using AV1 instead of h265. Combine it with 120k OPUS for the best size-quality.
Assuming your planning for the future as av1 support is mostly software decoding rather than hardware.
Your router’s IP can be anything. Choose any internal IP address on your subnet.
You can have 2 routers on the same subnet just make sure you disable DHCP on the new one while you perform the setup of everything else.
Then when you want to switch over, toggle on dhcp on the new router and replace the cables and you should be fine. You’ll know it’s working when you plug into it and get a default route of the new router.
Yep. Keep the WAN port dhcp Client enabled if you can, just one less thing to worry about.
Also take note that when you change the static IP of the new router it would conflict with the old one (and dhcp might fail). So you might need to set your local clients IP. Take note of the configuration it has and the steps to set it manually.