Can anyone explain these annoying outlier points from my zwave thermostat? This is from a honeywell thermostat, but before this I had a trane that suffered from the same problem. It happens with current temperature and humidity. It’s not like its terrible, it doesn’t mess with my automatons or anything, but when I want to...
This is fairly common with remote sensors. Some are perfect and exist in a perfect system, some do not. I am going to rattle off some of the first things that pop into my head…
Honestly, there are a thousand reasons that you could miss a data point every once in a while. Just looking at the chart, it is still sending a data block but the humidity just reported low for a second. Maybe the thermostat is not getting a data block and filling in the data based on its own clock.
Compare it to other data and see if the system turned on or off. Electronics can be sensitive to power drops and it wasn’t able to feed power to the part of the board that manages the sensor for a second. Maybe there is a condition where a capacitor gets fully discharged for a second and is pulling all current away from the sensor. (It’s usually an analog signal from sensors and maybe a measurement of resistance that translates to temperature or humidity. A voltage drop would significantly impact a reading.)
It could be a timing glitch with the code where it can’t read the sensor but builds the data block anyway. Depending on how the sensor works, it could be trying to compute the data the second it gets polled for data and it has nothing to give.
It could even be the wiring to the rest of the system. HVAC systems vibrate and a screw might be getting loose. It could be a cold solder joint, even. What is to commonality between the two thermostats that you had?
The list goes on. I have always treated sensor data as unreliable. Heck, I have a couple of CO2 sensors that do the same this as what you are seeing here. Every so often, the just report zero for a second.
Mesh protocols like zwave and zigbee aren’t 100% reliable. It could be local interference with the signal.
Without some extensive debugging and the willingness to disassemble your thermostat, just treat it as an annoyance.
in charlie and the chocolate factory (2005) (the best version imo b/c i saw it as a kid and the magic only works around then) a lady said that chocolate is an aphrodisiac and i’ve completely internalized that as true....
There is a term for things like that: “mental gymnastics”
People can naturally hold conflicting ideas or sometimes feel the need to believe things they know aren’t true. It’s extremely important for people to become more self-aware in that regard as it is something that can be exploited by religions, politicians, cults or scam artists.
Everyone is vulnerable to it, to different degrees. Even in the privacy of our own thoughts, most of us have tried to convince ourselves of something that wasn’t true, regardless of any facts we have seen. It’s just human nature.
Quitting drinking is a peculiar beast. If you were a “normal” drinker, you might only experience some mild mood irritation or have an issue getting to sleep if nightcaps were your thing. You might experience nothing.
If you were a heavy drinker and immediately quit, that can actually kill you. I am going to be realistic here: Ex-drinkers in my class of alcoholic could drink a few bottles of wine, or a case of beer or 5th of liquor throughout the day and then drink more after that, pass out drunk and then start the next morning with a couple of shots.
Alcohol withdrawal in those extreme cases can be deadly. When I quit, I was in bed for a week, with supervision, and had a detox center on speed dial, just in case. It’s no joke. (I should add that my approach was still risky and stupid.)
But yeah, quitting anything that is addictive is going to piss your body off a little. Eventually, if you lay off the “bad things” long enough, your body will recover. You can see the full gambit with nicotine though: Agitation, higher BP, sweats, etc. It depends on your body.
Above all else, talk to a doctor. Everyone’s situation is always unique and is rarely diagnosed properly over social media.
Connect instance switching will be buggy sometimes, especially when there is a Lemmy update that modifies auth tokens in some way.
The only way I know how to resolve account list bugs like that is to purge your app cache and app data. It’s not ideal, but it has worked for me in the past.
FreeCAD is fairly good. Some of the controls are a bit wonky, but that is just a minor gripe. If you are starting on FreeCAD, that doesn’t matter so much. FreeCAD is good to know if you design components for KiCAD as well.
Parametric modeling is fucking awesome, btw. I am not quite sure how old that concept is though.
I can only suggest typical troubleshooting stuffs:
clear all app data/app cache (requires reauthentication to instances)
logout/login to all instances (if you didn’t clear app cache and app data)
disable any kind of third-party task manager (those don’t really do much anyway.)
temporarily disable third-party ad filters (many apps absolutely hate local SSL proxies/local VPNs. For me, Connect is unusable with AdGuard’s SSL filter, but it could be a general Lemmy issue)
Try and get crash logs. (This is a convoluted process on Android, so you will need to research a process that works for your phone. If someone has a point-n-shoot process for this, I really want to know.)
Different post display settings might reduce memory consumption. This is a theory, and I don’t know whch ones would have the biggest impact.
Connect will consume a considerable amount of phone memory, but it’s less than my average for other apps. It is currently using ~400MB RAM, but it peaks at ~1.5GB. I am also a heavy user, so there is that. (My app cache is only at about 500MB, for now.)
I just dug a little into the Flutter API and saw what might be going on. Scaling is done properly on a regular browser, but there might be a built-in function for it somewhere. It may take a few more steps with Flutter.
(Just rambling a bit for those who care about details and theory crafting.)
Calling BoxFit in Flutter is significantly less expensive for thumbnails, I would speculate. It appears that it would take a few operations to scale an image properly and could impact slower devices.
An option to enable or disable image scaling would be nice. It’s just annoying that its probably not a one line code change. (Unless it is. That would be great.)
I learned a lot running a drop shipping based novelty store for a bit and it seems that human sexuality has very few boundaries. As long as nobody gets hurt (unless that is their thing) and everyone is of age, people should explore what they want to explore.
I made a little bit of a joke about that in my last comment, but it was just superficial. It’s someone’s thing and they have every right to get off how they choose. (TBH, the people I met that were on the extreme side of things were very open and had a good sense of humor about it.)
Edit: I was looking at this from an American perspective and assuming these were all 'murican ships and aircraft. There aren’t. Nothing I previously wrote would align with the video since the British navy is weird. So, I just erased my assumptions. They were likely all wrong anyway.
That explains my confusion. Something looked really off and and my brain couldn’t compute what I was seeing, TBH. The elevators looked right, but I still wasn’t sure.
Edit: There more. Is that whole group British? The last two fixed wing aircraft that fly by aren’t 'murican either. I see a Black Hawk-type helicopter, I think. We use SH/HH-60s in our Navy that have their rear strut moved way forward. The British and Americans both use LCACs as well. The leading helicopter might actually be a Merlin followed by some Wildcats. Alas, all I can make are stupid guesses now.
Having pissed off my fair share of people on social media, there are people that could just be sitting around and downvoting just you. It happens and it’s really weird.
However, I have noticed that here on Lemmy a little more. New comments or posts will get downvoted fairly quick, but they will bounce back fairly quick. It’s also weird.
When doing a search for community names, it would be cool to also see the instance name a community is located on. (The user count of the community is still useful.)...
Zwave Thermostat- Outlier stats (feddit.nl)
Can anyone explain these annoying outlier points from my zwave thermostat? This is from a honeywell thermostat, but before this I had a trane that suffered from the same problem. It happens with current temperature and humidity. It’s not like its terrible, it doesn’t mess with my automatons or anything, but when I want to...
Quarter was rejected at the laundrymat. Someone slipped me a token for a lazer tag franchise that went bankrupt in 1997 (lemmy.world)
What misconceptions do you still have that you learned from TV/film as a child?
in charlie and the chocolate factory (2005) (the best version imo b/c i saw it as a kid and the magic only works around then) a lady said that chocolate is an aphrodisiac and i’ve completely internalized that as true....
For context, texas is a state roughly the size of texas (lemmy.dbzer0.com)
This youtube comment section captures perfectly one of the reasons I hate reddit (lemmy.ml)
Can you guess what it is?
[Feature Request] Export/Save settings.
Sometimes I need to clear app cache and app settings and would like to save my Connect preferences somewhere and restore them later....
Is it normal for your BP to rise after quitting
Quit drinking and smoking cold turkey 9 days ago and my BP is about 140s over 80s (was observed to be even higher about 72 hours in)....
Michelin's Defender 2 is an all-season tire that outlasted three leading competitive tires by more than 25,000 miles for two extra years of tread life. Backed by an (lemmy.world)
[Bug] Unremovable account
I seem to have gotten a saved account that can’t be switched to and therefore can’t be removed....
Planck (file.coffee)
I'm amazed at FreeCAD's abilities. It needs a better name. Thinking of it as simply "cad software" like calling a 2-GHz computer in your pocket a "phone". (www.scan2cad.com)
I thought I would knock some dust off my drafting skills after a small chat with @captain_aggravated...
Well........ (lemmy.world)
Shit…
Is there a word for the feeling of nostalgia for or missing of another lifetime one only lived in a dream?
[title] I could swear I came across it before, but then again, maybe I dreamed it. 🫣
Let's get raunchy
The most outrageous/crazy place you’ve had sex
18+ crash issue
Enjoy app but recently when viewing All, it will just shut down. All subscribed work well, just “All”. Fix ideas?
Post images always square and stretched
As the title says, the post images are always square and because of that non-aspect-ratio-respecting scaling a lot of images are stretched....
Electro posting (reddthat.com)
Community note pointing out fake news once again 🫡 (sh.itjust.works)
How the rest of the world sees the US and Royal Navy (files.catbox.moe)
deleted_by_author
[Feature Request] Additional search information.
When doing a search for community names, it would be cool to also see the instance name a community is located on. (The user count of the community is still useful.)...