@LazaroFilm@lemmy.world
@LazaroFilm@lemmy.world avatar

LazaroFilm

@LazaroFilm@lemmy.world

This profile is from a federated server and may be incomplete. Browse more on the original instance.

LazaroFilm,
@LazaroFilm@lemmy.world avatar

They had QOL but I remember my machines running significantly slower. And that was not worth the extra QOL.

LazaroFilm,
@LazaroFilm@lemmy.world avatar

I use apple’s Books app. If your audiobook is properly formatted, the app can remember your position, show chapters and cover etc…

LazaroFilm,
@LazaroFilm@lemmy.world avatar

To find where a certain movie is available I use Just Watch

LazaroFilm,
@LazaroFilm@lemmy.world avatar

Natural selection at work.

LazaroFilm,
@LazaroFilm@lemmy.world avatar

Je suis je suis je suiiiissss……

LazaroFilm,
@LazaroFilm@lemmy.world avatar

Yep. Some are just so freaking big. I would rather take two smaller pills than one throat size. Talk about perfect fit…

LazaroFilm,
@LazaroFilm@lemmy.world avatar

And Laser-Raptors???

LazaroFilm, (edited )
@LazaroFilm@lemmy.world avatar

No, you Musk post from Twitter… I mean X

LazaroFilm,
@LazaroFilm@lemmy.world avatar

The way I see it is you’re the Simon says machine and the computer is the player. It is expecting the sudo prompt. Asking me is more like do you want XXX Y/n:

LazaroFilm,
@LazaroFilm@lemmy.world avatar

Given the downvotes you’re getting, I’d say you’re at odds with the majority.

LazaroFilm,
@LazaroFilm@lemmy.world avatar

I done let random strangers give random treats to my dog.

LazaroFilm,
@LazaroFilm@lemmy.world avatar

I use stingers used on film sets instead. It’s more that $1 markup.

Power device with higher voltage battery and still get battery reading

I want to power this board with a 14v battery. The board has a 1s battery connector that can power the board and read the voltage via ADC. Is there something I could place between the two to lower the voltage and still have a battery voltage reading? I would not be charging the battery through this. The usb port would not be...

LazaroFilm,
@LazaroFilm@lemmy.world avatar

Thanks for the pointer. Looks like a buffered voltage divider is the way to go. Now down the rabbit hole I go! 🐰🕳️

What's the thinnest E-ink screen that is closest to 3.5×2.5 inch?

I am curious if one, something like this exists, and two what the cost might be? I am looking for a screen, I assume an e-ink is the best/cheapest option and I want it to be as close as possible to the size of a playing card, ideally not thicker than 2MM. But I think up to 5mm could work....

LazaroFilm,
@LazaroFilm@lemmy.world avatar

For an e-ink display to work you need 4 things.

  • the display itself.
  • a display driver that connects to that flat ribbon cable to the display.
  • a MCU or computer to host your programming and send commands to the display driver
  • power, wether it’s battery, USB, or induction…

You can separate the screen from the driver and have the e paper show the last image. The one thing I’d be worried about is how fragile the components are on the side of the rapper display itself as well as the ribbon cable.

Also, you mention 150+ cards. Think of the time it would take to change each one separately with a dock. Connecting the display to the driver is not hot pluggable you would likely need to power cycle the whole thing at every card. Plus the damage risk of constantly connecting the fragile connectors.

LazaroFilm,
@LazaroFilm@lemmy.world avatar

You could potentially modify a game to work with those cards. Making cards able to change state or add extra states (that would usually be extra cards) to a single screen. I like your idea. Maybe the idea would not be a retro fitting but a ground up new mechanics for the mage?

LazaroFilm,
@LazaroFilm@lemmy.world avatar

Basically it’s broken right now. You can try and fix it and it will either work (yay) or not (so just like now) you have nothing to lose. Worst case you tried something new and learned things!!!

LazaroFilm,
@LazaroFilm@lemmy.world avatar

Wait, you guys are getting paid?

LazaroFilm,
@LazaroFilm@lemmy.world avatar

So no connection with Motörhead…

  • All
  • Subscribed
  • Moderated
  • Favorites
  • •
  • localhost
  • All magazines
    •
    Loading…
    Loading the web debug toolbar…
    Attempt #