askelectronics

Hello altogether, I guess everybody has some USB-C cables lying around, but wonder if it’s 3A, 5A, 3.0, TB… Anybody able to recomment a device able to determine that? Maybe also something that can be combined with a load tester.

I got these TP4056 modules from an AliExpress vendor and fail to understand how the protection circuit works or if it’s just typical Ali shovelware. It could be my limited understanding of electronics....

It’s an SPST-NO micro switch. Don’t waste time searching for it. I already wasted mine. Just let me know what it is if you know it off the top of your head. 😊

Since MOSFETs have a gate capacitance you’d want to limit the inrush of current from the output of a microcontroller to prevent it from getting damaged prematurely. That’s what gate resistors are usually good for....

I recently came to the realization that I’ve been kinda punishing myself with cheap no-name solder that is really difficult to work with....

I’m an EE by trade focusing on embedded devices, but most of my work is in relatively low-power STM32 applications. When I stopped following developments in hobby kits, it was mostly Arduino Unos slowly driving I2C OLED displays....

Trying to repair a Hyperkin Duke Xbox controller where the left trigger doesn’t respond. Found that the resistance of this potentiometer doesn’t change when it’s moved, so I’m looking to replace it. I’m a novice with this stuff though and I’m having trouble identifying it. Any help is appreciated.

Hi everyone!...

Direct Macro unveils a steadfast technological ally, resolute in delivering avant-garde and dependable solutions tailored to address the panorama of your varied requirements. A steadfast commitment to quality and performance underscores our expansive array of state-of-the-art offerings 400-aemm Internal Hard drive to elevate...

I’m learning about electronic components. I believe this is the part which has broken and made this heating pad unsafe to use. Well, unusable, not just unsafe lol.

I’m planning to make a modular synth from scratch, but I need to start with the PSU. Do you see any issues with this schematic?...

cross-posted from: lemmy.world/post/9052986...

I want to replace one half of this with longer wire, but I am not confident about the name of the connector used....

So, there are these great 32700 LiFePO4 batteries that showed up in my local industrial market. For like USD 2$!...

I had an old USB Oscilloscope (StingRay), it's 20+ years old now....

Just exploring about this tp-link XN020-G3v router. I’m mostly interested in connecting to the UART, won’t be tinkering with electronics of it, but out of curiosity I tried to search what these chips are. and I couldn’t find much about the big chip. Can anyone describe the 4 main chips on it ? Best would be datasheet, but...

I migrated here in the US (specifically in San Bernardino, CA). Quick Intro: I’m a graduate electrical engineer; honestly, I really don’t have that much experience and not even a decent internship experience due to covid, resulting in an online OJT. Do you think doing an internship here in the US is the way to go? If yes,...

hi again, since i had a bad idea in my last post i wanted to try again to get some feedback i could understand and apply....

My Google-fu has completely failed me. I’ve got an RGB addressable led curtain. It has 20 strings of 20 LEDs in a square arrangement. I initially assumed it had a wire feeding led data back up, to go to the next drop. On checking however, they are T jointed....

To all the electronic nerds out there: I am trying to trigger a 555 timer by movement in a random direction that also occurs randomly and any change in position should trigger the 555. AFAIK tilt switches are not useable here. Does this idea make sense?...

Im building a flashlight and i want to test if a fan in it would be a good idea but the flashlight is really small so i would need a motor thats smaller than 1 cm preferably. I found really good ones at maxon group but unless you order them in bulk(1000+ units) they cost like 400€. So do yall know anywhere i could find them?...

Does anyone recognise these power supplies? They’re cheap AliExpress led drivers and I want to change its output voltage to around 22V from 12V. I’ve read that the way to do this is to adjust the REF voltage on the IC that controls it. It’s a KA3845 but I don’t understand where that reference voltage is regulated. One...

The purpose of this PCB is to be small, have ok RF performance, and use USB as main power-source and interface. (Off course it has UART if USB is not available) this is just a somewhat challenge I set myself to design a esp32 PCB with the IC without a already made module....

I have a 3D printer and have a special filter that has two 24V blower fans that are connected in parallel. Unfortunately my printer doesn’t have the proper connectors for the fans. So if I purchase something like this power jack adapter I know the adapter is 12V not sure if that would make a difference. Anyway if I connect the...

Hi,...