Create your own automation instead of using the blueprint. The blueprint doesn’t expose the location so it won’t work.
You might be able to look at the full yaml from the trace and copy it into a new automation (replace everything, then update the name). Once you’ve done that you should be able to use the visual editor and make whatever changes you need.
I’ve actually been trying to implement something like this myself, but I’m trying to do it natively in HA. What I’ve done so far is make an automation for each appliance that calls a script (with variables passed through for messages and whatnot) which notified each member of the household in parallel, based on whether they’re home or not.
My eventual plan is to make each appliance automation flip an input_boolean that sends an initial notification which can be dismissed (either by sensor, NFC tag or notification action). Then every so often or based on a trigger (like door opening, toothbrush doing off, etc.) it triggers the notification script again.
Do either of you know what entity is being used for weather? I use openweathermap for my weather entities, but none of them provide a nice image of the weather like in the picture above
Maybe a template sensor over the openweathermap_forecast_condition state? You can pretty easily have a template change its icon, and mdi: has all the icons built in.
Here’s a template I use for current condition in a card, but it should work similarly for the forecast. Or works just need to be applied to the icon of a template sensor.
github.com/…/Installation:-Home-Assistant-OSInstalled it, got one feed working live streaming, that’s it. Left it because of life you know. Upgrade it to version 0.8 the other day and rebooted the HoAss server and voila, there it was. Recordings of the all the movements recorded by the camera.
I mean you can basically make everything you can image work through stateless switches. You would use homebridge to attach some script to the switch and start from there. That’s how I control some of my stuff too. AFAIK homebridge and HA can co-exist.
Yes sorry I didn’t read your whole question very well. It may be possible to use the integrated remote app in the iPhone to control that. What device plays this video feed?
I’ve been using the Sendled Sengled E11-N1EA bulbs available on Amazon for quite some time now. They have a bit of a cold white edge to them and could maybe be a bit brighter at times, but overall I’ve been happy with them.
Mine came in a 4-pack. I have two inside in table lamps, and two outside in coach lamps.
I’ve had 10 of the RGB ones, E21-N1EA, for a few months now and they’ve been working perfectly. Not the brightest or the most accurate color, but they’re simple, cheap, and local-only.
I’m using both IKEA and Hue bulbs without having used any of the original apps/hubs (though I do use the deCONZ/Phoscon hub addon, not the Home Assistant ZHA but if you’re device is listed as compatible the experience should be the same.
Edit: apparently you can re-pair without a remote, see below comment: One thing to note about the Hue bulbs (without a Hue hub) is that you need one of the remotes to reset bulbs after already being paired so they can be re-paired to a hub, where as the IKEA only need the power turned off and on a number of times to enter pairing mode.
I actually ran into this just the other day on some refurbished Hue bulbs. I was able to reset then without any remote or app using this method. Just make sure to do it 2-3 times in a row or until the bulbs start flashing.
I use bulbs I’ve bought from IKEA and Lidl. Because they’re ZigBee they’re local. The "Hub’ is HA because I have a ZigaZiga electrolama.com/projects/zig-a-zig-ah/ usb stick.
I use ZigBee2MQTT in HA to route commands to my bulbs (and sensors and plugs) which routes ZigBee commands through my MQTT broker which is also in HA.
I would spend the money on smart switches before smart outlets. I personally find that I want smart control over almost all of my lights/ fans but only some of my outlets.
Another reason for my avoidance of smart outlets is they are much more expensive than smart plugs and it’s rare that you want to control both plugs in an outlet anyways.
As far as wiring if you want window/ door sensors or motion sensors you might consider running power to those locations. Much better than changing button batteries constantly.
Use conduit to future proof any network cables you run…
I don’t get as much into automating for the sake of automating. Personally, I prefer technology that makes my life easier. Anything “smart” in our house has to be manually overrideable.
That said, one thing I’m working on automating is the HVAC. Eventually I’ll have the Central heat, central humidifier, and whole house fan controls all integrated with HA. My goal is to maximize both comfort and energy efficiency. Being able to maintain the comfort level by automatically switching between A/C or fresh air (via the whole house fan) would be pretty cool (figuratively and literally).
It might be easier to have the electrician install normal switches at first. That will give you time to figure out which ones you want to be smart, which ones you want on dimmers, etc.
Sensors will all be outside the wall, although you should make sure the thermostat wire has enough for a C wire.
I don’t know about smart outlets – I don’t think they’re very common. Most smart outlets are designed to plug in to normal dumb outlets.
If there’s a good spot on the ceiling, I’d have them run some ethernet cable to a box. You can leave it covered, but it’ll be there in case you decide to mount a WiFi AP there.
This is the answer. I have a handful of notifications setup this way. My routing logic tends to be much simpler but that’s what “choose” is for.
The only tricky one may be to hold the notifications until later. I probably wouldn’t bother with that personally. Instead I use the do not disturb functionality on the phone.
I love the automation screen updates. Makes it all a bit less “techie”. I’ve been assisting my non-technical sister with setting up her own instance on a Pi. This is going to make things much easier for to understand.
I simply use an USB conference speaker/microphone plus the Assist Microphone add-on. (in my case this one from Microsoft, it works great with my RasPi.)
I actually prefer that over the Echo or other embedded devices, as it is able to pick up my voice from further away and the output audio quality is much better. (My use case is something similar to commercial proprietary systems like from Amazon/Google.)
The M5Stack Echo I use on my night stand with push to talk for quick actions, for that it is enough.
Sorry to not tell that, the plan is indeed for doing this in node red. I only want an example to put me on the right track and thought maybe someone else had something similar.
homeassistant
Hot
This magazine is from a federated server and may be incomplete. Browse more on the original instance.