I have this habit where I try to squeeze every bit of use out of a device until something forces me to get a new one.
My latest two phones have both lasted for 7 years, and I’m still not planning on upgrading until someting breaks.
In all those years I have never encountered a situation where I would have benefited from my phone being more waterproof than just basic ingress protection. Higher IP ratings are only helpful for those who don’t want to be conscious of their possessions and want insurance in case of accidents instead of preventing the situations outright.
If we truly want to reduce our impact on the use of natural resources, we should start with eradicating the mindset that things being disposable is somehow fine.
Nuclear powered- or nuclear capable submarines? Though I guess in nuclear powered submarines the “batteries” are actively unglueing themselves, which is what powers them in the first place.
Unfortunately we still see too many people push the “but my IP rating” narrative without realising that engineers are perfectly able to design gaskets for all kinds of applications.
Some phones with removable batteries even had them and were (to a certain degree) waterproof.
The ONLY reason phones are no longer servicable is profits. Why extend a product’s lifespan if you can just frustrate the consumer to the point where they will just buy another one?
Think of it this way: There’s value in having access to a list of curated content others have deemed “worth reading or looking at”. But there is just as much value in engaging in some banter, provided it doesn’t lead to outright war in the comments.
I admit, it is tiresome trying to seriously discuss a topic when people haven’t actually read the article, but there is still an upside to a topic triggering at least enough interest to where people actually want to engage.
“Weee-wooo weee-wooo weee-wooo… Sir, I’ve noticed that you’ve missed the cart return. That’s okay, it’s kinda hard to find. See, the cart goes over there.”
cue incoming verbal violence.
For anyone missing the reference: CartNarcsAbsolute treasure trove of comedy gold featuring entitled shitty people.
Had the exact same experience the other day. Fuck these machines, fuck printers, fuck microwave ovens, fuck software updates and fuck time estimates in general.
From personal experience working in a Microsoft ecosystem, it’s mostly a matter of being able to hire the right people.
There is a near-infinite source of IT workers that have some expertise with Microsoft software and services. And those kinds of numbers simply don’t exist for the Linux world, especially with all the different configurations out there.
Medium-sized organizations have to employ a strategy of throwing enough idiots at a problem in order to keep things running. This also creates some of the issues they need the idiots for because no one has detailed knowledge of how things work.
My attempts at proposing a linux-based application server have been met with all sorts of “but our domain policy”, “we can’t guarantee continuity”, “none of my people know how to admin this stuff” type responses.
It definitely is a matter of mindset, but there is also a big commitment to make if switching systems to Linux. And that is a choice managers will only make if the benefits are clearly illustrated in a businesscase.
Certified European here, can confirm individual member states and EU as a whole as not being a utopia.
Especially us Dutch folks who have been fucked over and held hostage by a waaay to large upper middle class for years. To the point where we’ve managed to abolish the ministry of housing, open up the housing market to foreign investors, replace a functioning healthcare system with a healthcare market where insurance firms rule with an iron fist and demand more bureacracy than actual care being provided.
… and the list goes on.
It’s a worldwide symptom of economic unequality and the decrease in social skills stemming from the fact that we live our lives increasingly isolated in our own online social bubbles. We’re turning increasingly hostile towards each other because we’re no longer confronted with all people and perspectives in our surroundings, but just the ones we like.
The United States, being a large country filled with very diverse people, despite all being taught to “love America”, still deals with Nebraskan farmers having wildly different wants and needs, and way different social standards than the Californian yuppies.
You’re a large country, with 334 million people spread out over a vast amount of land. Meanwhile, we’re 18 million living on a patch of marshy land roughly 3/4th the size of West Virgina, and we’re further from being united than ever before. The fact that you’re even holding together as a country is nothing short of amazing considering the fact that your political systems probably cause way more chaos than ours do.
A lot of Europeans probably mean it when they say “How are you even a country?”. And it’s not so much an attack on the American people as a whole (though some of y’all deserve to be made fun of), but geniuine amazement at the fact that it has more or less held together since 1776.
While I’m not exactly an expert user of AutoCAD (my background is architecture, industrial design and full stack development), I know enough about the software where I can tell it’s based on a lot of legacy spaghetti code.
It’s the same for Solidworks, which I know through and through, including the shitty VBA scripting environment. My CAD teachers always used to say the software is built like a wooden playhouse, which has been extended over the years to include a second story, a slide, a swingset and a roof extension. But underneath it all, it is still the same “don’t fix it if it aint broke” codebase that Dassault has taken their chances on since the '90s.
The second someone invests any kind of money into an open source alternative, the way Blender has done for the mesh modeling industries, both Autodesk and Dassault systemes stand to lose their respective monopolies on 2D and 3D CAD.
But the trend is not limited to CAD software only, it is also highly prevalent in software providers for governmental tasks. Most of which sell the same products for years without iteration on their codebase. The result is that government organisations have to deal with shitty software that requires their individual users to connect to the database (yes, you heard that right, every user has to manually input database credentials that include all grants on all of the relevant datasets). Most of these cronies are reselling badly thought out software, where they’ve outsourced the development to third-world shitholes. Is is a goddamn miracle that there aren’t more major incidents with government organisations.
The only solution for this kind of bullshit is open standards that encourage an open source approach to these kinds of critical applications. Where more parties are actually encouraged to build their own software and where the businessmodel is built around being a service provider and not a magical black box salesman.
If you’re able to stop worrying about generating revenue based on your intellectual property and focus on generating revenue from the service you provide, surrounding your product… you’ll automatically build a better product.
I bet AutoCAD will collapse either way if Microsoft decided to purge legacy components from the OS. Feel like the codebase hasn’t changed since the early days and it probably depends on some APIs that have been there since Windows ME.
I haven’t dabbled that much in PCB design but I have seen some good things in KiCAD. All my electro engineer homies assure me Altium’s the way to go for now though. Most of them also happen to be big F(L)OSS nerds so I’m curious to see where KiCAD goes in the future.
FreeCAD is an awesome attempt at building a parametric CAD modeler, though it will need a lot of polish to be usable. Especially on the UX side of things the software could do with a lot of improvement. As far as I know the most difficult part to program for parametric modelers is the actual geometry kernel, which is why so many modelers are based on Parasolid, including the recent hybrid modeler Plasticity. For a F(L)OSS parametric CAD modeler to truly succeed some genius needs to build an open geometry kernel that performs at least close to on par with Parasolid. But that takes a special kind of autistic in order to achieve. Either that or the engineering world needs to collectively decide this needs to happen.
As much as I hope FreeCAD becomes the open source alternative everyone is looking for, it is trying to be everything at once and that might be too ambitious for the current state of the project. I’m secretly hoping we also get a new project sometime soon with a smaller scope.