Most of the time there is no 1:1 replacement, it all depends on which features you use from these apps. Some suggestions:
AMD Software
CoreCtrl can do most of the important stuff from the AMD software like GPU overclocking, custom fan curves and per-game profiles.
Logitech Ghub
Piper has a lot of support for different mice and keyboards, maybe yours are supported there?
Realtek audio
I’m not sure what Realtek audio does nowadays, which features do you need?
Video recording
OBS is available and does pretty much does the same stuff as on Windows. If you need to capture gameplay you will have to install obs-vkcapture which is the Vulkan/OpenGL replacement for DirectX capturing included on the Windows version of OBS.
Audio settings
Which settings do you require? What do you mean with “Audio quality”?
Unfortunately most Pipewire/Wireplumber settings are hidden behind config files and I’m not aware of any applications to manage them. The KDE audio settings are quite decent but limited in scope. However, most of the Pipewire settings have a sensible default and probably shouldn’t be changed unless you’re doing audio production.
qpwgraph is quite powerful when you need to connect multiple devices together or have virtual audio devices.
Which distro do you use? I don’t really have much sound issues here and I have a pretty exotic setup.
I mostly used AMD Software for instant replay, I miss this loads. Tried replay-sorcery like 3 times, failed all 3 times. I gained more knowledge since, fixed discord’s screenshare, so I might give it another shot, but I also heard that you can get instant replay with OBS somehow.
Yes, I use OBS for that. The feature is called “Replay Buffer” and I have it running with no issues with hardware encoding. I would recommend you use the OBS flatpak, depending on your distro you might also want to use Steam in a Flatpak to make things easier.
I’d like some alternative to fancontrol, I know I could set fanspeed in the bios, idk why I don’t. But I had a nice lil software that managed fans, now I don’t.
I’m not aware of a software that controls all fans but I didn’t really look since I just let them do what they want. CoreCtrl can do the GPU fan but I also leave that alone.
Piper also doesn’t support my mouse. It does however support the one I just switched from a month ago…
You might have some luck requesting support for your mouse/keyboard on their git page, maybe support can be added.
Idk what Realtek does, but I never had any sound related problems on windows. AKA it just worked, I’d like it back pls.
What does not work?
I’d still like to fix the bandwidth (I read somewhere that it’s limited by default)
There’s no bandwidth limit on Pipewire that I’m aware of. The default sampling rate is 48000 if you mean that but it’s a sensible default and you probably don’t want to change it.
and mess around with EQs, my lead is AutoEq.
AutoEq sounds good. EasyEffects definitely can do your EQ and much much more.
there is just so little support, paired with such a steep learning curve.
The learning curve can be steep but don’t be afraid to ask, there’s a lot of helpful people on here. Also most Github/Gitlab projects might look intimidating but they also gladly offer support for applications there.
PDF viewers
Okular is included with KDE and is pretty competent.
Like grep’s powerful, how does regex work, links?, everything in /etc, bash script. hopefully I can get these answered in 2024.
Those are not strictly needed in order to “use” Linux but if you want to learn about them you there’s a lot of resources for them out there. ChatGPT is also pretty useful in helping with bash scripts/commands since they’re sometimes hard to read.
Mine is Strawberry since it has a ton of options and plays a ton of formats. It’s also (distant) fork of Amarok 1.4 and integrates well with KDE Plasma. I’m curious what other people are using these days. What’s your favorite player?
My comment was mostly meant as a joke. I’m aware most of them use their networking capabilities for IPC and being able to use them remotely is just a cool feature resulting from that (except X11).
I have a unique name, think John Doe, and I’m hoping to create a unique and “professional” looking email account like johndoe@gmail.com or john@doe.com. Since my name is common, all reasonable permutations are taken. I was considering purchasing a domain with something unique, then making personal family email accounts for...
I currently selfhost mailcow on a small VPS but I would like to move the receiving part to my homelab and only use a small VPS or service like SES for sending.
I’m curious if cars would be bricked if they couldn’t call home, or if you could selectively allow certain messages through.
I can’t speak for every car but at least Teslas do not mind being offline. You cannot control which messages they send because they connect via a VPN to the mothership. So it’s an all or nothing kinda deal.
You can also pretty easily remove the SIM card on older models with just a few screws. Newer ones use eSIMs, never looked into how to get rid of that one but I assume it is more complicated.
Your comment makes me wonder if one could get around AT by installing faraday cages around where the chips are.
The antennas are usually external, mounted somewhere else in the car and can be unplugged. Never checked if it can still get a signal without the antenna though.
edit: Also, the PCB itself is mounted inside a faraday cage because the entire thing sits inside of RF shielding.
I use an 6900 XT and run llama.cpp and ComfyUI inside of Docker containers. I don’t think the RX590 is officially supported by ROCm, there’s an environment variable you can set to enable support for unsupported GPUs but I’m not sure how well it works.
AMD provides the handy rocm/dev-ubuntu-22.04:5.7-complete image which is absolutely massive in size but comes with everything needed to run ROCm without dependency hell on the host. I just build a llama.cpp and ComfyUI container on top of that and run it.
I’ve gotten to the point where I have more than a few servers in my homelab and am looking for a way to increase reliability in case of an update. Two problems: 2 of the servers will be on Wifi and one is a Synology NAS. I can’t do any wiring but I can put together a WiFi 6E network for the servers only, That means buying 4...
Definitely go with K3s instead of K8s if you want to go the Kubernetes route. K8s is a massive pain in the ass to setup. Unless you want to learn about it for work I would avoid it for homelab usage.
I currently run Docker Swarm nodes on top of LXCs in Proxmox. Pretty happy with the setup except that I can’t get IPv6 to work in Docker overlay networks and the overlay network performance leaves things to be desired.
I previously used Rancher to run Kubernetes but I didn’t like the complexity it adds for pretty much no benefit. I’m currently looking into switching to K3s to finally get my IPv6 stack working. I’m so used to docker-compose files that it’s hard to get used to the way Kubernetes does things though.
Linux reaches new high 3.82% (gs.statcounter.com)
What's your favorite music player on Linux? (lemmy.ml)
Mine is Strawberry since it has a ton of options and plays a ton of formats. It’s also (distant) fork of Amarok 1.4 and integrates well with KDE Plasma. I’m curious what other people are using these days. What’s your favorite player?
Why more PC gaming handhelds should ditch Windows for SteamOS (arstechnica.com)
Self-hosted or personal email solutions?
I have a unique name, think John Doe, and I’m hoping to create a unique and “professional” looking email account like johndoe@gmail.com or john@doe.com. Since my name is common, all reasonable permutations are taken. I was considering purchasing a domain with something unique, then making personal family email accounts for...
Does anyone else harvest the magnets and platters from old drives as a monument to selfhosting history? (lemmy.world)
Is DNS Bloat too? (lemmy.sdf.org)
Haier, the air conditioner maker, takes down open source third-party Home Assistant integration (lemmy.world)
cross-posted from: lemmy.world/post/10882099...
Haier hits Home Assistant plugin dev with takedown notice (www.bleepingcomputer.com)
Remove Modem/SimCard from a Car
I want to buy a new car, but it needs to be privacy friendly. Sadly you cannot really buy any new Car that is....
AMD Publishes XDNA Linux Driver: Support For Ryzen AI On Linux (www.phoronix.com)
Proxmox HA, Docker Swarm, Kubrenetes, or what?
I’ve gotten to the point where I have more than a few servers in my homelab and am looking for a way to increase reliability in case of an update. Two problems: 2 of the servers will be on Wifi and one is a Synology NAS. I can’t do any wiring but I can put together a WiFi 6E network for the servers only, That means buying 4...
KDE 6 Megarelease - Release Candidate 1 (kde.org)
Become unreachable (startrek.website)