Never seen any cat that chose to stay inside even 50% of the time when given a choice. I’d rather they enjoy their life than make me feel better be cause they’re penned up all the time.
I think we fixed that for someone a few months ago, maybe you can scroll back and find it. I think the guys handle was user-something, might have been around May…
I dunno when it happened but I swear SBCs were the new best thing in the universe for a while and everyone was building cool little servers with their RockPis and OrangePis....
I’m just going to say, I shit on them all along. ARM is relatively expensive, bespoke and difficult to compile for because of that. Anyone can puke out a binary for amd64 that works everywhere. And way, way faster than some sad little SOC. Especially weird is spending $1000 on a clusterboard with CMs that had half of the power of a 5 year old X86 SFF desktop you could pick up for $75 and attach some actual storage to.
Maybe RISC-V will change all that, but I doubt it. Sure hope so though. The price factor has already leaned the right way to make it worthwhile.
Basically title. I waited on installing F droid for a long time because my phone threw many scary warnings when I tried a long time ago. But now I have it, and I got some fossify apps, but since there is no “Editor’s Picks” on F- droid I dont really know where to go from here....
There’s a lot of difference between a container and a VM. You can install HA on a container, all you have to do is set it up according to the manual install instructions, and work around any hardware interfacing issues that come up. You’ll save 200MB of RAM and will have to do any upgrades manually. Doesn’t seem worth it to me, but to each their own.
I started out that way, but I’ve moved to doing most of it in HA directly since they massively improves the UI. I still use NR for complicated stuff though. I’ve recently started using Pyscript for modbus integrations too.
I’ve done something similiar in NR to scrape the CUPS webpage on my desktop and turn on a tasmota plug for the printer when it sees a job waiting in the queue. I wouldn’t even try to do that in HA directly. But I wouldn’t be surprised if there’s an integration somewhere that would do it.
I’ve been running HA for a while, and it’s been working well; I haven’t had to change much in a few months. That being said, it’s fun to tinker with it, and I’m curious to hear what kind of automations the rest of the community is using. What automations are you most proud of? What are your favorite? What kind of...
I’m trying this now, I see it change the state to “printing” but I can’t bring up the device in automations to act on it. If I go into the IPP devices page and try to add an automation from the device page, it tells me no devics are available for automation.
Edit: got it, it was under entities, not devices, in automations. That’s one more thing out of Node Red now, thanks!
I can’t stand using Gnome, but it is the only one that’s vaguely touch friendly. If you pile enough extensions in there, it becomes usable. Plasma has always been a disaster for me on tablets. Maybe 6 will be better, but I’m not holding my breath.
Check out the “Open Source Security Podcast” with Kurt Siegfried and Josh Bressers. It’s not about specifics so much as how to build a mindset around security for IOT and hosting, generally dealing with opensource offerings.
We have our house and a cabin. While I guess I could make an area for the cabin, it has it’s own areas that I’d like to manage separately (and copy automations directly)....
If you’re using Voice Assistant, the recog and TTS are much faster and more fluent than what I’ve seen on my own system. I am running it as a VM on an old server, so hardware will matter, of course. Also, you can get remote access with Home Assistant Companion proxying your HA interface very seamlessly. There might be others, but this is what stands out to me.
I don’t see that there’s any sort of integration for writing code to process information from HA entities like Node Red + Companion. Am I missing something and this is more than just an interface for the config files and maybe a git client for those config files?
No, I see all the config files in VScode, but I really don’t have much need for that since I’ve usually done that stuff via SSH. I was wondering if VSCode gave any sort of actual integration with HA like the NodeRed Companion does by exposing all the entities within the IDE so you can do your own coding.
Another commenter mentioned Pyscript which seems like it does some sort of tying together of HA and code.
These things aren’t bad, I’ve got a few that I use sort of successfully, but the speaker and mic aren’t very powerful. I was thinking of building one with an ESP32 and i2S (not i2c, that threw me off too) speaker/mic, but I’m wondering if I’d be reinventing the wheel here if there’s a better alternative already out...
AMA (sh.itjust.works)
"Outdoor Cat vs Indoor Cat" by Sarah Andersen (lemm.ee)
Source: Website - RSS
Never again (lemmy.world)
So SBCs are shit now? Anything I can do with my collection of Pis and old routers?
I dunno when it happened but I swear SBCs were the new best thing in the universe for a while and everyone was building cool little servers with their RockPis and OrangePis....
Streaming Pirates Are Hollywood’s New Villains - Illegal subscription services that steal films or TV shows bring in $2 billion a year in ads and subscriber fees. (www.bloomberg.com)
Alright boys, I've been converted to the light side and have installed F-Droid. Now what?
Basically title. I waited on installing F droid for a long time because my phone threw many scary warnings when I tried a long time ago. But now I have it, and I got some fossify apps, but since there is no “Editor’s Picks” on F- droid I dont really know where to go from here....
Alternative to Home Assistant for ESPHome Devices
Hello,...
Share your favorite automations
I’ve been running HA for a while, and it’s been working well; I haven’t had to change much in a few months. That being said, it’s fun to tinker with it, and I’m curious to hear what kind of automations the rest of the community is using. What automations are you most proud of? What are your favorite? What kind of...
Best DE for touch screens but also normal use
Hi!...
[Fixed] Fedora 39 keeps rebooting when left idle for a long time
Edit: Fixed by this comment: lemm.ee/comment/8626267 Thanks!...
The "safest" way of self hosting
Hello peoples,...
Do I need a separate HA Cloud subscription for the cabin?
We have our house and a cabin. While I guess I could make an area for the cabin, it has it’s own areas that I’d like to manage separately (and copy automations directly)....
VS Code in Home Assistant: any use for this outside of editing yaml files?
I don’t see that there’s any sort of integration for writing code to process information from HA entities like Node Red + Companion. Am I missing something and this is more than just an interface for the config files and maybe a git client for those config files?
Anyone seen or built an alternative to the M5Stack Atom Echo for HA voice pipeline?
These things aren’t bad, I’ve got a few that I use sort of successfully, but the speaker and mic aren’t very powerful. I was thinking of building one with an ESP32 and i2S (not i2c, that threw me off too) speaker/mic, but I’m wondering if I’d be reinventing the wheel here if there’s a better alternative already out...
Reddit suddenly caresTM for the blind (web.archive.org)
Transparent PR moves are transparent.