Admittedly, it's been a long time since I did anything with linux, but I have done some. I'm not a developer, I don't know how to write any code. I know some DOS scripting and now some powershell. If I need to do anything slightly different with linux, it would require me to learn a whole new scripting language, and all of the documentation I've seen for anything linux seems to be written for an audience of people who already really know what they're doing in linux and just need a specific reference material.
I've had mainly Windows machines all my life, I have been forced by necessity to figure out how to do what I need on those. I imagine if I'd had linux machines since ... 1995? I would feel as comfortable with linux now. But the barrier to entry to even having a linux machine, let alone making it do what I needed it to do, back in the late 90s, early 2000s, was way higher than it was for Windows. It arguably still is.
I hate the CLI and every time I had an issue every manual or forum or user would give me the solution using the CLI.
Also gaming. There is lots that runs fine on Linux now, but there is also lots which does not. Especially gaming peripherals like my Fanatec wheel and pedals.
I got tired of everything taking so much effort. I was almost always able to eventually wrangle what I wanted out of the OS, but every change I wanted to make and thing I wanted to try needed so much searching and learning. I wanted stuff that just worked, even if it was "dumber."
That, and some parts of the community I ran into were really prickly. One that was especially memorable: I was asking for help on a big-ish project with a lot of followers and helpers and didn't expect the lead dev to answer my question, but when he did, he felt the need to make a snide as hell comment about how I have no business being there if I'm going to forget to start a service. On top of the exhaustion I was already feeling, I had a massive moment of "okay my guy, I guess I'll just fucking leave then."
Anyway, it just feels better being a poweruser on windows. I know enough to keep it clean, safe, and slim (like using powershell to disable the bits they don't expose to a settings UI, for example) -- to truly admin my machine -- without having to work so hard for it day in and day out.
Yikes, that is why I hate tech forums. Too many times I’ve asked an informed question I’m unable to find via search and the first replier basically says “hey go FUCK yourself.”
I was trying to run my own personal-use instance of LiveJournal back 20 years ago when it was open source (and not owned by Russia). Just to see if I could, as is the spirit of a tinkerer.
There was a handful of paid staff as well as a bunch of enthusiastic volunteers, so I expected one of them to answer a low-priority newbie support request, not.. what I got.
Unfortunately, those kinds of interactions are inevitable when the developer/user relationship is so close. And it goes both ways. I saw a thread just yesterday where a user reported an issue on github, a second user said they saw it too. Later the first user posted a workaround to the issue, and the second user came back with “took you long enough”, and that was the end of the exchange.
Some people in the world are just dicks, but that doesn’t mean we should reject interacting with everyone. Similarly, a community of user-maintained software is going to have some asshats, but that doesn’t mean we should hand our computing freedom over to one or two corporations. Just my two cents.
Some people in the world are just dicks, but that doesn’t mean we should reject interacting with everyone.
Corollary: Your personal aversion to corporations doesn't mean users have have any motivation or obligation to keep trying when we're getting pushback from both the software and those who maintain it.
Anyway, I'm not sure how you got that I reject interacting with everyone after my experience, but extrapolating my statement to that kind of extreme phrasing sure doesn't fill me with confidence about future interactions, either.
Hey there, I think we got off on the wrong foot. I’m not discounting anything you’re saying, I agree that it’s definitely a very real phenomenon, and didn’t intend to provoke a defensive response. I didn’t say that you were “rejecting interacting with everyone”, on the contrary, I’m saying that in the physical world you deal with people who act like dicks, but you specifically DON’T reject interacting with everyone. I’m drawing a parallel between that behavior in the physical world with how I believe we should also behave in the digital one.
I also did not say that I have any personal aversion to corporations, I owe most of my daily comforts to corporations, so I would be a hypocrite to say as much. But if I had said that “I don’t think we should stick our hands in blenders” that doesn’t mean I have a personal aversion to blenders.
I still can't really agree that the comparison holds; we try harder in real life because the bar for being a dick is (usually) higher. On the internet, when all it takes is a few easy sentences to be a dick to a faceless stranger whose reaction we don't have to see... to me, the response should be equally fluid, else we get bogged down being the only one putting in the effort and taking a constant beating to our self-esteem when we wonder why no one is bothering to hear us.
However, I appreciate you being chill about clearing up what you meant. I did initially miss the comparison you were going for and feel like I was getting cereal box therapy about not cutting people off (and thus staying in toxic communities) when that wasn't what you meant.
I hear you, perhaps there is a fundamental difference there with the digital world.
I really want to see some linux distro get to the point that users don’t have to wonder if something has gone horribly wrong for them. As much as I do disapprove of some of Apple’s repairability policies, and as much of a toxic human being Jobs was, Steve Jobs really was a visionary. He saw that if you paid attention to detail, you could turn a computer into something that “just worked” for people who weren’t tech savvy. Until that point, it was engineers selling to other engineers, they just couldn’t see the potential that technology had. As far as I can tell, the linux world has never had someone with such a relentless vision for user experience. I personally think it’s because the opportunity for profit just isn’t there, or at least no one sees it.
But there was a time when buying a windows license meant you got a copy of windows and that was it; now no matter what you do it’s full of ads and telemetry and constant popups about new features you never asked for. I would gladly pay the price of a windows license for a linux distro that was as thought out and usable as an Apple or Windows product in their prime, and maybe we’re entering a window (no pun intended) of time where that’s finally possible.
Currently my experience with 3D printing. It’s one thing after another, and the community, at least on Reddit and Facebook, fucking sucks. If I ask a question, it’s always “hey how about you go fuck yourself” or an essay that has zero relevance to what I’m asking. Made a post on Reddit the other day (I know, but have a single burner account until the 3D printing community here takes off more) and just asked to see some settings due to just constantly having issue after issue. Half of the responses were people just telling me they’re not fucking wizards and they need to know what kind of problems I’m having. I… didn’t ask for that whatsoever. I very explicitly just asked for someone’s slicer settings to compare to.
That's absolutely the worst help forum experience, when you're asking one question but everyone extrapolates the question they think you REALLY meant to ask and talks down to you about it.
And of course if you try to steer the conversation back to your actual question, you get painted as the unreasonable one placing all sorts of conditions on the generous free help others are allowed to bestow upon you.
The less reliance on others Linux requires, the better off it will be for general adoption.
Haha your second paragraph sums it up perfectly. A few folks did share their settings, but they were for completely different printers/hardware haha. Most of the online guides I’ve found are written under the assumption that you’re already a master at the hobby, and it’s strangely spread out in random little nooks of the internet - there’s not really a ton of centralized discussion forums. Maybe the hobby is way smaller than I thought, or maybe I’m just in way over my head, but I fix tech problems for a living - did not expect this to be as much of a challenge. Never buy a 3D printer if you value your sanity and living stress-free. Sorry, I just needed to rant for a minute haha.
Yeah 3D printers are fussier than I expected. Especially when printing anything involving supports and more specifically… small areas that need supports. I print a lot of stuff for D&D and have just started cutting things up into pieces with blender to print easier, then glue it together
I will say. My first thought was obviously to ask what printer you have, to see if I could send you my profile for you to compare (depending on the slicer you use). Then my second was to ask if you’re having issues and if so, what the issues are.
Only because sometimes a seemingly large issue could be a very small fix.
When I first started, I got it working great and then out of no where nothing would stick to the bed. I spent more time than I’d like to admit messing with settings only to realize it was the oils on my hands causing adhesion issues. Some 99% IPA fixed all my issues real quick haha.
That would be awesome! I’ve got an Ender 6 with a Micro Swiss NG extruder. I was printing decently with the stock hardware, but that stock extruder was a nightmare and kept slipping or completely losing grip on filament mid-print, so I upgraded to this extruder. Now I’m just trying to find that perfect spot to where it extrudes but doesn’t grind filament. I’ve been having some really messy prints.
I just had a feeler gauge arrive in the mail, so I’m about to use that to try leveling the bed more accurately. Everyone says to just use a piece of paper or something, but different paper is different widths haha.
I do have a PEI bed, so stuff sticks and comes off way easier now, but I would love to check out your slicer settings to get a good baseline! What kind of hardware do you have, and which slicer do you use?
Just using that outright probably won’t work. What I would do is load up the default Ender 6 profile that Cura has, and then adjust settings based on mine. For instance. You went from a bowden extruder to a direct drive. So you can probably copy my retraction settings as a baseline and adjust from there. You need far less retraction on direct drive extruders (i.e. 0.2mm-1mm for direct drive vs 5mm-8mm for bowden).
I would also look up CHEP and Teaching Tech on youtube. They have great videos on bed leveling and everything else related to 3d printing.
Most of the online guides I’ve found are written under the assumption that you’re already a master at the hobby
I’ve had exactly the opposite experience lol. Most of the stuff out there is dreadfully basic, and if you want detail like scientific comparisons of the strength-weight ratios of different infill patterns, good fuckin luck. Some chum on YouTube will have some half baked experiments and that’s as good as it gets.
You're not wrong, but running Linux directly correlates to more time spent on "tech forums in general," so it's still a bigger problem with that OS than others imo.
Classic gojo with pumice. Was like washing your hands with sharp wet gravel. Pretty sure it just removes the top layer of skin more than it cleans anything. Can’t be dirty if it’s gone.
I think I get it what you mean… you are feeling like you are watching a tv show in your perspective, like you are not the one who acts, you are just watching? One of my friemds had a similar experience, please tell me if I understand it the wrong way.
Nope. Been using the same installation of Windows 10 for years, and everything just works.
Even swapped the SSD from one laptop into another one. Added a UEFI boot entry, and it came right up.
I think the only problem I ever had was audio or Wi-Fi occasionally failing to work after resume. But that resolved itself after one of the major updates.
The only annoyance I've run into is the "Let's finish setting up your device" screen after feature updates. But you can disable that fairly easily.
I mainly use it as a glorified Chromebook though. Browser, Windows Terminal + WSL, maybe the occasional Inkscape or Lightroom. All the "interesting" stuff happens in Linux VMs atop ESXi running on an old desktop.
But for everyday use, it's nice to have something that "just works" when I pick it up.
I might check out Linux again in a few years though. From what I've read, PipeWire seems to be killing it in terms of progress on the audio side. So once the Wayland ecosystem matures, it should be fairly easy to get back that "just works" status with Linux.
In terms of performance, the main issue Windows really has is disk I/O. But a modern SSD fixes that easily. I am using a second-hand, nine-year-old Dell Latitude laptop, and it does everything I need it to do. Boots up in seconds. Has to stay plugged in though.
Everything felt wondrous to me after I got out of an abusive marriage bruised but alive. It’s not that I feel more, but the realization that I am able to feel at all amplifies the intensity of my positive feelings. Do you feel like you’re trapped in a rut at all? Or maybe you’ve convinced yourself that all the best moments have already past? Sending positive vibes to you!
It’s a really good way to get rid of the mentality of one person can’t make a difference. Because everyone is a drop, and without so many drops, there is no ocean. Maybe one individual drop doesn’t truly make a difference alone. But what if every drop was gone?
It helps me feel that, even if the difference I make isn’t big enough to make an impact, an impact only exists BECAUSE of all the drops.
That goes for both positive and negative things. A thousand bad drops are needed to make a bad thing. A thousand good drops to make a good one.
Sorry to question it, seeing as you like it so much, but doesn’t that not make a difference if you’re still fairly sure there’s not enough other drops?
I prefer the starfish on a beach analogy for the same thing because it cuts others out entirely.
Hm. Good question, and I can’t say I have a great answer.
I like the starfish one too, the ocean one is just better for my mindset.
I guess accountability? The starfish story appeals more to personal ego (not using the term ego as a bad thing here), where as the ocean one feels more like accountability to me.
Starfish is saying that the little thing you do can help someone, even if it doesn’t solve the problem. Ocean one is saying that everyone is responsible, even if only a tiny bit in the grand scheme.
I kind of pair it with a mindset of if every drop thinks that they don’t make a difference, that adds up. One person can’t save the planet, but every person thinking they can’t save the planet means that you have that ocean of people all thinking that they don’t matter. And that’s a big problem.
Like I said, probably not the best answer. Just rambling what came to mind.
Hey, if it works for you, I guess. I find I’m easily frustrated if I imagine there’s a ton of other people working against me but that’s really my issue.
asklemmy
Oldest
This magazine is from a federated server and may be incomplete. Browse more on the original instance.